Surrey · England
Anglefield Corner Fire Rated Sealant
Fire-stopping gaps in Anglefield Corner need attention? We cut out the old, prepare the joints and apply the right sealant.
- Gaps filled with a product that is not fire-rated
- Open joints along the top of partitions
- Open gaps behind door architraves
Fire rated sealant for homes and businesses in Anglefield Corner
Fire stopping only performs as intended if it’s done to the detail: the right depth, the right backing and the right product for the substrate. That’s the part we focus on, gap by gap. Common call-outs are for gaps filled with a product that isn’t fire-rated and gaps flagged on a fire risk assessment, on plasterboard & masonry, linear gaps and service penetrations.
If you have holiday lets, a converted barn used for business or a community building near Anglefield Corner, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
Big or small, it’s backed by our 12-month guarantee.
- Place
- Anglefield Corner (RH9)
- Region
- Surrey
- Cover
- One year on every job
- Price
- A clear price before work begins
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
How the visit works
You don’t need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the work takes from a few hours to a few days, depending on the number of gaps and the access for a typical job. Somewhere as small as Anglefield Corner, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- We record the locations and products used for your records.
Getting ready for the visit
- On commercial sites, let us know about site rules
- Let us know about earlier repairs to the joints
- Clear items away from the joints we’re working on
Get a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. Whenever you’re ready, ring 0345 464 0079 or send us an email.
Related advice
Honest limits
To be straight with you, there are a few things sealant won’t fix:
- Openings too large for sealant, which need batts, boards or another system
- Issuing a fire rating or certificate for a building
- Problems with the door itself rather than the gap around the frame
Not sure which it is? You can ring 0345 464 0079 or send us an email and we’ll tell you honestly.
Joints and surfaces we work on
- Flats & HMOs
- Plasterboard & masonry
- Pipe & cable gaps
- Service penetrations
- Linear gaps
- Door frames
Fire rated sealant around Anglefield Corner
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Rented homes near Godstone station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Anglefield Corner is about 5 miles east of Horley, in Surrey. We carry out fire rated sealant for homeowners, landlords and businesses in Anglefield Corner and nearby, as part of our work across Surrey. Anglefield Corner is one of 395 places in Surrey we cover. For nearby work, see our Crawley page, about 8 miles away.
We cover every part of RH9 for fire rated sealant and the streets around it. Whether your property is on Carlton Road and Eastbourne Road or anywhere close by, our applicators can take on the job. Neighbouring places we cover for fire rated sealant include South Godstone (1 mile north-east), Crowhurst Lane End (2 miles north-east), Crowhurst (2 miles east), Tandridge (3 miles north-east) and Bletchingley (3 miles north-west). Larger places within reach include Epsom (13 miles north-west), Horley (5 miles west), Redhill (5 miles north-west), Ewell (13 miles north-west), Reigate (6 miles west) and Caterham (6 miles north).
Around Anglefield Corner
For rail, the closest station is Godstone station, about 1.2 miles north-east of the centre. Other landmarks nearby include Bletchingley Castle (3.1 miles north-west) and East Surrey Hospital (4.5 miles west). The countryside around Anglefield Corner includes Bay Pond and Hedgecourt Lake.
How to look after the new joints
A little care helps the new joints last. Our advice:
- Allow for resealing whenever new services are run
- Take pictures of fire stopping before ceilings or boxing go back
- Store the list of sealed gaps with your building paperwork
- Tell trades working in the building that fire seals must be put back
Follow the cure time we give you before decorating over the sealant. Some fire-rated sealants can be painted and some can’t and we’ll tell you which one you have.
An open gap isn’t only a fire issue: noise, draughts and even pests can come through too. Sealing them early helps on every front.
Surface by surface
Masonry and concrete
Preparation counts on brick, block and concrete. The gap is cleaned and backed where required before the sealant goes in.
Door frames
Our work is the joint between frame and wall. Doors, seals and closers are for a door specialist, and we will say if we spot a problem with them.
How we quote for fire rated sealant
Some jobs are bigger than they look, and some smaller. What affects the quote:
- How much there is to do
- Access and height
- The type of sealant required
- Whether old sealant or filler has to be cut out
Leaving a failed joint generally makes the job bigger, not smaller, as water and mould keep getting in. If you are not sure whether it needs doing, phone 0345 464 0079 or drop us an email and we will give you an honest view and a quote.
What we need to know
To help us quote quickly, let us know:
- Any previous sealing or DIY work
- What’s wrong with the joints now
- How many joints, rooms or windows are involved
- How we’d reach the joints
For fire rated sealant in Anglefield Corner, ring 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
Towns and villages near Anglefield Corner
Other services in Anglefield Corner
Your questions about fire rated sealant in Anglefield Corner
Is Anglefield Corner in your area for fire rated sealant?
Yes. Our work covers London and the South East, and Anglefield Corner is part of that. Just phone 0345 464 0079 or drop us an email with a few details of the job.
Do you cover smaller places like Anglefield Corner?
Yes, Anglefield Corner is covered. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
What does intumescent mean?
Intumescent describes a material that swells in heat. Intumescent sealants are a type of fire-rated sealant.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
Will it make a mess?
Very little: the area around the joints is protected first, and we tidy up before we go.
Do you certify the fire stopping?
Ratings and certificates aren’t something we issue. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves; we install to those details and record what we did.
Can you work in occupied buildings?
Yes. Flats, HMOs, offices, schools and other occupied buildings are all part of our work. We agree access and the order of work with you first.
Should I try DIY first?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
Signs you need fire rated sealant in Anglefield Corner
Over time, buildings change layout and use. A house turned into flats or an HMO, or an office split into smaller units, brings new walls, new service routes and new gaps.
Look out for any of the following:
- Old fire sealant that has split or come away
- Sealant items on a fire risk assessment action list
- Door frames with gaps between frame and wall
- Gaps filled with a product that isn’t fire-rated
For buildings such as Church of St John the Evanglist, older buildings that have had new heating or wiring often have service gaps worth checking.
Before booking anyone
- Which colour the sealant will be
- What guarantee comes with the work
- How the joint is cleaned and prepared
- How long to leave it before use
Should I try it myself first?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.