Highland · Scotland
Fire-rated sealant in An t-Àth Leathann, Highland
We cover An t-Àth Leathann for intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly.
- Fire stopping disturbed by later work
- Gaps left after a refit or conversion
- Fire seals that have cracked with movement
Common problems we fix in An t-Àth Leathann
Door frames are a common weak spot. The architrave hides the gap between frame and wall, so it can be left open when a door is replaced.
The problems people normally mention when they call are:
- Gaps left after a refit or conversion
- Gaps flagged on a fire risk assessment
- Fire seals that have cracked with movement
- Damaged fire sealant left by other trades
Community buildings like Broadford Parish Church are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Questions to ask before booking
- Whether they seal over old material or remove it
- What happens if they find a problem under the old sealant
- Whether the sealant suits the joint
- Whether you can choose the colour
How we handle fire rated sealant in An t-Àth Leathann
In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. A new cable run or a replaced pipe can leave an open hole behind. Those are the gaps we close, using a tested fire-rated product. We work on plasterboard & masonry, door frames and linear gaps, and common reasons people get in touch are damaged fire sealant left by other trades and gaps around pipes and cables through fire-resisting walls.
In a smaller place like An t-Àth Leathann, commercial jobs are more likely to be a hotel, guest house, school, surgery or community hall than an office block. Each needs sound sealant in its washrooms and kitchens, and fire-rated joints kept in good order.
Your job is guaranteed for a year, as with all our work.
- Place
- An t-Àth Leathann (IV49)
- Region
- Highland
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What the job involves on each surface
Service penetrations
Pipes, cables and ducts passing through fire-resisting walls and floors each leave a gap. We seal it with a product tested for that service and gap size.
Flats and HMOs
Flats and HMOs rely on fire separation between homes and the common parts. We seal the gaps your assessor has identified room by room.
An t-Àth Leathann: your questions answered
Will you come out to An t-Àth Leathann?
Yes. An t-Àth Leathann is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
How do Scotland’s building regulations apply to fire-rated sealant in An t-Àth Leathann?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We do not certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Are you an approved applicator?
Yes. We’re approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
How long does fire rated sealant take?
Typically it takes a few hours for a handful of gaps, and longer for a whole building. Larger jobs naturally take longer.
Where do you work from?
We’re based in Crawley, and we work across South East England, London and Scotland.
Will you assess my building’s fire safety?
No. We work from the specification you give us.
Do you work in flats, HMOs and commercial buildings?
Yes, whether the building is a school, an office, flats or an HMO, and whether it’s in use or not. Tell us how the building is used and we’ll plan around it.
Work for landlords, hotels and businesses
For anyone letting property in or around An t-Àth Leathann, several properties can be quoted together. Send us the addresses and the work at each.
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
How we quote for fire rated sealant
Jobs vary more than people expect. The main factors:
- The number and length of the joints
- The old material and how stubborn it is
- Which sealant suits the joint
- Any mould that needs treating
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Ask us for a quote and we’ll go through it with you.
Asking for a quote
What to tell us when you ask for a quote:
- The address or postcode of the job
- Whether it has been sealed before
- Roughly how big the job is
- What’s wrong with the joints now
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. Whenever you are ready, send an email to info@mrmastic.co.uk.
More services for An t-Àth Leathann
Commercial buildings in An t-Àth Leathann
For seaside hotels, guest houses and holiday lets around An t-Àth Leathann, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. We install fire-rated sealant to the product’s tested details; we don’t certify buildings or carry out fire risk assessments.
In and around An t-Àth Leathann, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
An t-Àth Leathann (Gaelic: Broadford) is in Highland. For fire rated sealant in and around An t-Àth Leathann, please email us at info@mrmastic.co.uk for a quick quote. We’re based in Crawley and cover Highland. Our Highland coverage runs to 253 places, and An t-Àth Leathann is one of them.
Here we cover the IV49 postcode area for fire rated sealant. Streets in the area include Ionad Bhoraraig, Suisnish Place and MacLennan Place, and we cover them all. Neighbouring places we cover for fire rated sealant include Blackpark (1 mile south-east), Corry (1 mile north), Harrapul (1 mile east), Kyleakin (7 miles east) and Kyle of Lochalsh (8 miles east). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Around An t-Àth Leathann
A little further out are Mackinnon Memorial Hospital (0.5 miles north). Open spaces near An t-Àth Leathann include Bheinn Shuardail and Loch Buidhe.
How it works
All our tools and materials come with us in the van, so there’s nothing for you to buy. After a quick look at the joints together, we protect the area and start. It normally takes from a few hours to a few days, depending on the number of gaps and the access. Around An t-Àth Leathann, distance and access matter more than parking. Tell us how to find the property and how to reach the work, and the visit is planned around that.
- We plan the order of work and access, floor by floor or flat by flat.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Getting ready for the visit
- Mention any leaks or damp you’ve noticed
- Tell us about access, such as stairs, a lift or high-level joints
- Mention any sign-in or site rules at work premises
How to get a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.
Advice
Why it’s worth doing now in An t-Àth Leathann
Paying for fire stopping that has to be redone is a false economy. If the details weren’t followed, the seal may need redoing when the building is next checked. Around An t-Àth Leathann, water from a failed joint in an older stone home can soak into timber and plaster.
No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference.
Why us?
- A 12-month guarantee on all work
- Over 20 years’ experience
- Anti-fungal sanitary silicone in wet areas
- Fully insured
How to look after the new joints
After the cure time, these simple habits help:
- Look in service cupboards and ceiling voids from time to time
- Flag any open gap you spot round a pipe or cable
- Check whether a sealant can be painted before decorating over it
- Don’t fill fire-stopping gaps with ordinary foam or silicone
Tell other trades that the gaps have been sealed, and ask them to reseal anything they cut through. Later work is a common cause of damaged fire stopping.
Any job that breaks through a wall or ceiling should include resealing. Catching it then saves a separate visit later.