Hampshire · England
External & façade joints in Stoke, Hampshire
External mastic for Stoke, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Brick movement joints where the sealant has split
- Cracked joints where brick meets render or frames
- Hard, crazed mastic that has stopped moving
What external mastic looks like in Stoke
Stoke is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That’s hard on movement joints and outside wall joints, especially on the side facing the sea. The South East is one of the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
If you let a flat or house near Warblington station, split movement joints are easy to miss on a rental until damp shows inside. If you live in an older home near Church of St Peter, old and new materials meet at the roofline and walls, which is where sealant earns its keep.
Stoke is about 3 miles south of Havant, in Hampshire. Stoke gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Across Hampshire, we cover 683 places, and Stoke is one of them.
Our applicators cover all of PO11 for external mastic. Whether your property is on Havant Road, Rogers Mead and Northwood Lane or anywhere close by, our applicators can take on the job. Main roads around Stoke include the A3023, which makes travel easy. We also cover the places around Stoke: North Hayling (1 mile east), Tye (1 mile east), Northney (1 mile north-east), Langstone (1 mile north) and Warblington (1 mile north). Further out, we also cover Gosport (8 miles west), Havant (3 miles north), Fareham (10 miles west), Horndean (6 miles north), Waterlooville (5 miles north-west) and Petersfield (13 miles north).
Landmarks near Stoke
We work in homes and buildings around The Maypole pub, among other places. For rail, the closest station is Warblington station, about 2.4 miles north. A little further out are Warblington Castle (1.8 miles north) and Havant Museum (2.1 miles north). For a walk, there’s Hayling Billy.
External mastic in Stoke
Joints between dissimilar materials, like brick against render or concrete against a steel frame, see movement from both sides. A flexible sealant bridges the two where a rigid filler would soon crack. Typical jobs include moss and dirt in joints with no sealant left and joints with sealant missing in places, across façade panels, render & cladding joints and brickwork movement joints.
Older homes in small places like Stoke may be stone, brick or timber-framed, often with later extensions. The joints where those materials meet are the weak points, and they need the right sealant at the right depth.
Big or small, it’s backed by our one-year guarantee.
- Location
- Stoke (PO11)
- Region
- Hampshire
- Cover
- A year, on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Places near Stoke
Also in Stoke
How it works
The work is kept neat and contained to the area we’re working on. The job usually takes a few hours to a few days, depending on the length of joint and the access, and we explain the cure time before we leave. In a small place like Stoke, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by walking round the building and agreeing the joints and the access.
- We cut out the old mastic and rake out anything in the joint.
- The faces are brushed clean and primed where the product requires it.
- Backing rod sized to the joint goes in to set the depth.
- The exterior sealant is applied, tooled and checked along its length.
Preparing for the visit
- Plan for the work area to be out of bounds to pets and children
- Mention if the joints have been sealed before
- Mention any parking rules near the property
How to get a quote
We do not publish a price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To get started, phone 0345 464 0079 or email us.
Advice
When to call us in Stoke
The wrong product in a moving joint is a classic cause. A high-modulus or general-purpose sealant can be too rigid for a busy joint, and it tears off the sides.
Keep an eye out for any of the following:
- Rain getting behind render or cladding at a joint
- Sealant pulling away from one side of the joint
- Weathered mastic that no longer stretches
- Leaking joints around cladding and façade panels
If you look after a building such as The Hayling College, its movement joints, gutters and trims need looking after like any other building’s.
What your quote should include
- Whether they’re fully insured
- Whether VAT is included
- Whether all the old sealant comes out first
- How hidden problems are handled
What we cannot put right
Some problems need a builder, plumber or other trade rather than us:
- Render that is blown, hollow or coming away
- Structural movement, which needs a surveyor or engineer
- Walls that need new movement joints cut into them
If you are not sure, just call 0345 464 0079 or email us and we will give you a straight answer before you book.
Joints and surfaces we work on
- Brickwork movement joints
- Concrete & block
- Façade panels
- Copings & trims
- Joints between brick and frames
- Render & cladding joints
Questions from Stoke
Is Stoke within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you help a landlord with a rental near Warblington station?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear quote.
Will the old sealant be removed?
Yes. We cut out all the old sealant and clean the joint.
When will the joints need doing again?
That depends on the wall, the weather and the movement. Signs to watch for are cracking, hardening and gaps at the edges, and reseal at that point.
How do you reach high-level joints?
Each building is different. Send us photos and a rough idea of the height and we’ll confirm how they can be reached safely.
Are you an approved applicator?
Yes. Mr Mastic is an ARBOMaster approved applicator and we are fully insured too.
What information do you need?
Tell us what needs doing and where. If we need more, we’ll ask.
Is the work guaranteed?
Yes. Each job is guaranteed for twelve months, wherever you are.
Surface by surface
Render joints
Render has movement joints and stop beads that need sealing. They’re resealed in a sealant that suits the render.
Joints between dissimilar materials
Each side of the joint may need its own preparation. Both surfaces are cleaned and primed as the product requires.
What affects the cost of external mastic
The quote reflects the job in front of us. We look at:
- The amount of work
- How much old sealant there is and how hard it is to remove
- Whether the work is at height
- The product the joint needs
What it costs depends on the size of the job, how much old material has to come out and access to the work. You’ll have a clear quote before any work starts, so you know where you stand.
Asking for a quote
To make quoting easier, let us know:
- Pictures of the joints, sent by email
- Where the property is
- The problem you’ve noticed
- How many joints, rooms or windows are involved
Want a quote for external mastic? Please call 0345 464 0079 or email us with a few details. We will explain what we’d do and give you a clear quote before work begins.
Landlord and commercial work in Stoke
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
Can I do it myself?
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.