Hampshire · England
New-build mastic & snagging in Stoke, Hampshire
Plot mastic for developers and snagging failed sealant in new homes for householders, landlords and businesses in Stoke. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Beads laid onto grit and dust from the build
- Leaking shower tray seals in a new home
- Cracks appearing as a new home settles
New build mastic for homes and businesses in Stoke
In a new home, every joint should have a clean, even bead. Smeared, patchy or cracked sealant is worth sorting early, before water gets into the floor or walls. If you are dealing with skirting joints opening in the first winter and new-build shower sealant that has already split, we can help, on kitchens, skirting & floors and bathrooms & en suites alike.
Work in a small place like Stoke just needs the journey and access planning, and the work itself is the same as on any site.
Whatever the size of the job, it’s backed by our 12-month guarantee.
- Where
- Stoke (PO11)
- Wider area
- Hampshire
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
New build mastic in Stoke: local notes
Stoke is close to the coast. Plot mastic on new homes near the coast takes more weather than it would inland, so any gaps are best picked up early. London and the South East are among the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
For new homes near Warblington station, it’s worth checking the sealant early, while snags are still fresh.
Stoke is about 3 miles south of Havant, in Hampshire. If you need new build mastic in Stoke, it’s easy to get a quote: please phone 0345 464 0079 or email us. We’re based in Crawley and cover Hampshire, Stoke included. Our Hampshire coverage runs to 683 places, Stoke among them.
Every address in PO11 is covered for new build mastic, from the main roads to the quietest streets. Local streets include Havant Road, Rogers Mead and Northwood Lane. Stoke sits on or near the A3023, so getting to you is simple. We also cover the places around Stoke: North Hayling (1 mile east), Tye (1 mile east), Northney (1 mile north-east), Langstone (1 mile north) and Warblington (1 mile north). We also work in nearby towns such as Gosport (8 miles west), Havant (3 miles north), Fareham (10 miles west), Horndean (6 miles north), Waterlooville (5 miles north-west) and Petersfield (13 miles north).
Landmarks near Stoke
Around Stoke, our work takes us to homes and buildings near The Maypole pub, among other places. The nearest railway station is Warblington station, about 2.4 miles north of the centre. Other landmarks nearby include Warblington Castle (1.8 miles north) and Havant Museum (2.1 miles north). Green spaces nearby include Hayling Billy.
When it is not the sealant
It helps to know what we cannot do:
- Cracked trays, tiles or worktops
- Disputes or warranty claims with your builder
- A tray or bath that isn’t properly supported, until it’s fixed
Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly before you book.
Where we work in Stoke
- Kitchens
- Bathrooms & en suites
- Show homes
- Skirting & floors
- Windows & doors
- Plot handovers
Landlords, agents and businesses in Stoke
For anyone letting property in or around Stoke, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and photos by email help.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
What happens on the day
The work is kept neat and contained to the area we are working on. The job normally takes a few hours for most snagging lists, longer for a run of plots, and we explain the cure time before we leave. For a village or hamlet like Stoke, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- Each joint is checked for movement before any work starts.
- Old sealant is cut out and the joints cleaned.
- We make sure the joints are dry and prime them if needed.
- Baths are filled with water, then the new sealant is applied.
- The finished joints are checked and the cure times given.
How to prepare
- Keep pets and children clear of the area while we work
- Let us know about parking restrictions
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
Asking for a quote is easy: let us know the job and the location and its rough size. A few photos by email make the job easier to understand.
Read more
Also in Stoke
Common questions in Stoke
Will you come out to Stoke?
Yes. Stoke is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you cover Stoke for new build mastic?
Yes, Stoke is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or drop us an email with a few details of the job, and we’ll give you a clear quote.
What colour sealant will you use?
We use white, clear or a colour to suit the finishes. Tell us what you’d like when you get a quote.
How long does new build mastic take?
As a guide, most jobs take a few hours for most snagging lists, longer for a run of plots. Bigger jobs take longer, and we will tell you how long to expect.
Do you work for developers?
Yes. Second-fix sealing in bathrooms, kitchens, frames and floors is part of what we do. We clean and prime joints properly to keep callbacks down.
Do you take out the old sealant first?
Yes. Sealing over old sealant is the main reason resealing fails early, so we never do it.
Is there a guarantee?
Yes. There’s a 12-month guarantee on every job, wherever you are.
Do you work for landlords and businesses?
Yes. Domestic, commercial and hotel work are all part of what we do.
What affects the cost of new build mastic
Some jobs are bigger than they look, and some smaller. What affects the quote:
- Mould in or behind the old joints
- How easy the joints are to reach
- The old material and how stubborn it is
- How many areas need sealing
Doing several joints on one visit is normally more efficient than separate visits, so tell us about everything that needs sealing. We’ll give you a clear quote for the lot.
What we need to know
Photos by email are helpful but not essential. Try to tell us:
- How we’d reach the joints
- Pictures of the joints, sent by email
- The rough size of the job
- Whether it has been sealed before
Call for a quick quote, or email us if that is easier. Tell us about the joints that need doing and we will explain what’s involved before giving you a price.
Can I do it myself?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
Keeping the joints in good condition
Good habits help new joints last longer. A few tips:
- Keep pictures and emails about snagging items
- Follow the cure time we give you
- Resist patching a failed seal with a tube from the DIY shop
- Open a window or run the fan after bathing
Avoid standing on the rim of the bath or the edge of the tray in the first few weeks. If a bath or tray moves when you stand in it, get it looked at.
Early snagging is easier snagging. Small faults turn into leaks if left over time.
Common problems we fix in Stoke
Sealant is often one of the last jobs before handover. Dusty, unprimed joints are common, so the bead never bonds properly.
People normally contact us after spotting one of these:
- Worktop and upstand sealant coming away
- Gaps opening as the house dries out and settles
- Plot mastic for developers ahead of handover
- Cracked sealant around new window and door frames
In and around Stoke, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.
Comparing quotes
- What guarantee comes with the work
- Whether the sealant suits the joint
- Is the old sealant removed completely?
- Whether VAT is included