Kent · England
External Mastic in Ruckinge
Sealing brickwork movement joints, render, cladding and façade joints in Ruckinge, with a one-year guarantee on every job. Call for a quick quote.
- Joints with sealant missing in places
- Failed sealant between panels on a façade
- Rain getting behind render or cladding at a joint
Work for landlords, hotels and businesses
For anyone letting property in or around Ruckinge, several properties can go on one quote. Just tell us the addresses and what each one needs, and photos by email help.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.
How we handle external mastic in Ruckinge
Low-level joints can normally be done from the ground. For joints higher up, give us some details of the building and we’ll confirm what access is needed. We work on joints between brick and frames, façade panels and copings & trims, and common reasons people get in touch are brick movement joints where the sealant has split and old sealant gone brittle and cracked.
In a village or hamlet like Ruckinge, older cottages and farm buildings often stand in the open, so walls and rooflines take the full force of wind and rain. Gutter joints and wall joints there need a sealant that can flex and stay put.
A 12-month guarantee comes as standard, so you are covered after we’ve gone.
- Place
- Ruckinge (TN26)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
External mastic in Ruckinge: local notes
Rainfall in the South East is lower than in much of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
For landlords with property near Ham Street station, outside joints that have cracked can let damp into a rental, so check them between lets. For an older house near a landmark such as Church of St Mary Magdalene, an extension built onto an older house moves differently, and the joint between them takes the strain.
Ruckinge is about 5 miles south of Ashford, in Kent. Across the TN26 area, we can carry out external mastic at your property. Ruckinge is one of 922 towns and villages in Kent we cover. Crawley is on our list too, about 47 miles from Ruckinge.
Jobs for external mastic in TN26 is quoted and booked the same way as anywhere else. Whether your property is on Oak Ridge and Hamstreet Road or a nearby road, we can help. Close by, we work in Hamstreet (1 mile west), Stone Cross (2 miles north), Orlestone (2 miles north-west), Bromley Green (3 miles north-west) and Kenardington (3 miles west). Within a short drive, we also cover Ashford (5 miles north), Folkestone (12 miles east), Hythe (8 miles east), Hawkinge (12 miles east), Tenterden (9 miles west) and Cheriton (11 miles east).
Around Ruckinge
Ruckinge’s nearest station is Ham Street station, about 1.5 miles west. A little further out are William Harvey Hospital (5.3 miles north). For a walk, there’s Orlestone Forest.
Leave it or put it right?
Water gets in through a failed movement joint and can run behind render or cladding. Dealing with it early keeps the repair to the joint, rather than the wall around it. Around Ruckinge, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Why choose Mr Mastic in Ruckinge
- 20+ years of sealant experience
- We agree the colour with you first
- White, clear, grey or another colour, product permitting
- Neat joints and a tidy finish
See how sealant jobs are priced and our reviews.
What sealant work cannot fix
A few problems are outside what sealant work can do:
- Walls that need new movement joints cut into them
- Cracks in the bricks or render themselves, away from the joints
- Damp that isn’t coming from the joint
If you are not sure, just phone 0345 464 0079 or drop us an email and we’ll give you a straight answer.
What we seal
- Joints between brick and frames
- Concrete & block
- Render & cladding joints
- Copings & trims
- Façade panels
- Brickwork movement joints
What we do, step by step
We keep the work tidy and contained to the joints we’re treating, so you can get on with your day. The job usually takes a few hours to a few days, depending on the length of joint and the access, and we tell you how long to leave it before we go. Somewhere as small as Ruckinge, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We look at every joint and agree a colour to suit the wall.
- We take out the old sealant until the faces are sound.
- Backing rod goes in so the sealant can stretch between the two faces.
- We prime the faces where required.
- A low-modulus exterior sealant is gunned in and tooled to a neat finish.
How to prepare
- Mention any tricky access
- Mention if the joints have been sealed before
- On commercial sites, let us know about site rules
Ask for a quote
We don’t publish a price list, as no two jobs are quite the same. Instead, we give you a clear price for your job. To arrange one, call 0345 464 0079 or send us an email.
Advice
Quotes for external mastic in Ruckinge
The quote reflects the job in front of us. We take into account:
- How many areas need sealing
- Access and height
- The number and length of the joints
- How much old sealant there is and how hard it is to remove
Leaving a failed joint generally makes the job bigger, not smaller. If you are not sure whether it needs doing, ring 0345 464 0079 or email us and we’ll give you an honest view and a quote.
Helping us quote
To help us quote quickly, please include:
- How we’d reach the joints
- Photos by email, if that’s easy
- The rough size of the job
- The type of property
For external mastic in Ruckinge, ring 0345 464 0079 or email us. Tell us what the problem is and where, and you’ll get a clear quote before we start.
Common questions in Ruckinge
Do you cover smaller places like Ruckinge?
Yes. Ruckinge is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you help a landlord with a rental near Ham Street station?
Yes, rental work is part of what we do. You can call 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before work begins.
What do you need from me for a quote?
Only a few details: the address or postcode, what’s wrong and any access issues. After that, simply call 0345 464 0079 or send us an email.
How much does external mastic cost in Ruckinge?
It depends on the job, so we quote each one individually. To get one, phone 0345 464 0079 or send us an email with a short description of the job.
Are you fully insured?
Yes. We’re fully insured.
Why do you put foam in the joint first?
Backing rod controls the sealant depth and keeps it off the back of the joint. Then the sealant bonds to two faces and can move.
When is the sealant fully cured?
It depends on the product. We tell you how long to leave it before we go.
Do you remove the old sealant?
Always. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Places near Ruckinge
More services for Ruckinge
Different surfaces, different methods
Copings and trims
Coping joints that leak let water straight down into the wall. Sealing them early saves the wall below.
Concrete and blockwork
Concrete faces can be dusty and porous, so preparation is key. We prime where the sealant needs it.
DIY versus a professional finish
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.