Kent · England
Bathroom & kitchen resealing in Ruckinge, Kent
Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Ruckinge and across Kent. Fully insured, ARBOMaster approved and guaranteed for a year.
- Leaking joints on a shower screen
- Lumpy, uneven sealant from a DIY attempt
- New sealant laid over old sealant that is now lifting
What the job involves on each surface
Kitchen worktops & upstands
Kitchen joints need more degreasing than bathroom ones, because cooking grease stops sealant bonding. Proper degreasing is what helps the new joint last.
Basins & vanity units
A vanity top has a joint along the wall and sometimes at the sides. If water gets in, the cabinet underneath can swell, so the joint is sealed in one unbroken line.
Bathroom resealing in Ruckinge
Before a bath is sealed, it’s filled with water. The weight settles the bath to its lowest point, so the bead is not stretched the first time someone gets in. Quick jobs often leave it out, and it makes a real difference. We work on sinks & splashbacks, shower trays & enclosures and kitchen worktops & upstands, and common reasons people get in touch are gaps between the worktop and the wall and mouldy sealant that has gone black.
Somewhere as small as Ruckinge, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we will put it right.
- Place
- Ruckinge (TN26)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Why deal with it now?
Leaving a split or mouldy bead only stores up trouble. Once water is behind the bath, it can reach floorboards, panels and the ceiling underneath, and that’s a far bigger job than a reseal. In a small place like Ruckinge, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
We do not show prices on the website, because each job is priced on what it involves. Call for a quick quote and we will talk you through it.
What you get with us
- Fully insured
- We agree the colour with you first
- Homes, businesses and hotels
- White, clear, grey or another colour, product permitting
Read our cost guide and customer reviews.
Aftercare tips
How long the joints last depends on use and care. We suggest:
- Squeegee the walls and tray after use
- Use gentle cleaners on the silicone
- Never pick at the silicone with a blade
- Open a window or run the fan so the room dries
Keep water off the new bead until it has cured, following the cure time we give you. After that, a quick wipe after showering helps keep it clean.
A few black dots in the silicone soon become a black line. Once it’s deep in the silicone, cleaning normally won’t remove it. Replacing the sealant early keeps the job small.
Towns and villages near Ruckinge
Other services in Ruckinge
What affects the cost of bathroom resealing
Every job gets its own quote. These are the things that affect it:
- Whether the work is at height
- Any mould that needs treating
- Working hours on commercial sites
- How many rooms, windows or areas are involved
The cost reflects the work involved, not guesswork. That’s why we ask a few questions first and agree the price before starting.
Helping us quote
What to tell us when you ask for a quote:
- What’s wrong with the joints now
- Any previous sealing or DIY work
- Pictures of the joints, sent by email
- Whether it’s a home or a business
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.
Ruckinge: your questions answered
Will you come out to Ruckinge?
Yes, Ruckinge is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you cover Ruckinge for bathroom resealing?
Yes, Ruckinge is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job, and we’ll give you a clear price.
How long does the new silicone need before I use the shower?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Leave it around 24 hours before it gets wet, or follow the cure time we give you.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just make sure your landlord agrees.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned before resealing.
Can you do several jobs on one visit?
Yes. More than one area can go on one quote.
Are you insured?
Yes. Full insurance covers our work.
Is it OK to put new sealant on top of the old bead?
No. It’s a common reason for reseals failing. The old joint is stripped, cleaned and resealed from scratch.
How it works
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes around two hours for one bath or shower, longer for a whole bathroom and we leave things clean and tidy. Somewhere like Ruckinge needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
Before we arrive
- Plan for the work area to be out of bounds to pets and children
- Tell us about any previous sealing or DIY attempts
- Mention any tricky access
Ask for a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. When it suits you, ring 0345 464 0079 or send us an email.
Advice
What bathroom resealing looks like in Ruckinge
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
Homes close to Church of St Mary Magdalene include some older properties, and walls and floors in older homes can move, and sealant and grout show it first.
Ruckinge is about 5 miles south of Ashford, in Kent. Jobs in Ruckinge get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Ruckinge is one of 922 places in Kent we cover. We also work in Crawley, around 47 miles away.
Jobs for bathroom resealing in TN26 works the same way as everywhere else we cover. We cover properties on Oak Ridge and Hamstreet Road. If you are just outside Ruckinge, we cover Hamstreet (1 mile west), Stone Cross (2 miles north), Orlestone (2 miles north-west), Bromley Green (3 miles north-west) and Kenardington (3 miles west). Further out, we also cover Ashford (5 miles north), Folkestone (12 miles east), Hythe (8 miles east), Hawkinge (12 miles east), Tenterden (9 miles west) and Cheriton (11 miles east).
Local landmarks in Ruckinge
For rail, the closest station is Ham Street station, roughly 1.5 miles west. A little further out are William Harvey Hospital (5.3 miles north). The countryside around Ruckinge includes Orlestone Forest.
Common problems we fix in Ruckinge
Not every tube in the shop is meant for a shower. Acrylic caulk and general-purpose sealants aren’t designed for a joint that is wet every day, so they stain, crack or go mouldy before long. Wet areas call for a sanitary silicone with an anti-fungal additive.
People generally contact us after spotting something like this:
- Gaps between the worktop and the wall
- A messy, uneven bead from a previous reseal
- Two layers of silicone, both failing
- Damp behind the bath or under the tray
Letting a property close to Ham Street station? Then mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
What your quote should include
- Who does the work, and how experienced they are
- What guarantee comes with the work
- Is the old sealant removed completely?
- What preparation is included
Should I try it myself first?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.