Isle of Wight · England
External Mastic in Queen's Bower
We cover Queen's Bower for sealing brickwork movement joints, render, cladding and façade joints. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Movement joints filled with mortar instead of sealant
- Weeds or debris growing in open joints
- Failed seals between different materials
How the job changes by surface
Copings and trims
Coping and trim joints face rain and sun head on. Each is resealed with a weatherproof, flexible sealant.
Render joints
The face of render can be soft, so a sealant that stretches easily protects the edges. Priming is done where the sealant calls for it.
About our external mastic in Queen's Bower
As ARBOMaster approved applicators, we choose exterior sealants to suit the joint and the surfaces. Some surfaces need a primer before sealing and we use one wherever it does. We’re often asked to deal with failed sealant between panels on a façade and joints with sealant missing in places, across joints between brick and frames, copings & trims and façade panels.
Older homes in small places like Queen's Bower may be stone, brick or timber-framed, often with later extensions. Where one material meets another is where water generally gets in.
All our work comes with a one-year guarantee, wherever you are in the Isle of Wight.
- Place
- Queen's Bower (PO36)
- Region
- Isle of Wight
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Common questions in Queen's Bower
Does the coastal weather in Queen's Bower affect outside sealant?
Coastal homes put outside sealant through more weather than inland ones, so preparation and the right sealant matter all the more. Walls facing the sea are generally the first to need attention.
Do you work for landlords with property near Sandown station?
Yes, rental work is part of what we do. Just call 0345 464 0079 or drop us an email and tell us about the property, and we’ll send you a clear quote.
Does someone need to be in?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
How do you reach high-level joints?
Each building is different. Send us photos and a rough idea of the height and we will confirm how they can be reached safely.
Can you quote for more than one area?
Yes. Just list everything you need and you’ll get one quote.
Where is Mr Mastic based?
Our base is Crawley. We work across South East England, London and Scotland.
Will the new joint stand out?
There’s a good range of exterior colours, including greys, browns, whites and stone tones. We choose the closest to your brick or render so the joint doesn’t draw the eye.
Can I do it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
When to call us in Queen's Bower
Weeds, moss and debris in a joint are a sign the sealant has gone. Roots and dirt hold water against the wall and speed up the damage.
These are the problems we’re asked about most:
- Leaking joints around cladding and façade panels
- Joints with sealant missing in places
- Sealant pulling away from one side of the joint
- Hard, crazed mastic that has stopped moving
For site and facilities teams at buildings such as Newchurch Primary School, its movement joints, gutters and trims need looking after like any other building’s.
What to look for in a quote
- Are they insured?
- Who turns up on the day
- What happens if they find a problem under the old sealant
- What preparation is included
Work for landlords, hotels and businesses
Hotels need rooms back in use, so the work can be planned room by room. We’ve worked in hotels as well as homes and businesses.
If you manage several properties in or around Queen's Bower, several properties can go on one quote. Just tell us the addresses and what each one needs.
Towns and villages near Queen's Bower
Also in Queen's Bower
How we quote for external mastic
There’s no set price list, because no two jobs are the same. What we look at:
- Mould in or behind the old joints
- How much old sealant there is and how hard it is to remove
- When we can work, for business premises
- Access and height
Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. You’ll know the price before we begin.
Helping us quote
When you contact us, it’s useful to know:
- Photos by email, if that’s easy
- How we’d reach the joints
- What the problem is, such as mould, gaps, leaks or cracking
- Where the property is
For external mastic in Queen's Bower, phone 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and you’ll get a clear quote before we start.
Why deal with it now?
A properly done movement joint is an even line in a colour that suits the wall. A rushed bead with no backing looks untidy and does not last, so it pays to do it properly once. Around Queen's Bower, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
The cost reflects the work involved, not guesswork. That’s why we ask about the job first.
Why Queen's Bower customers choose us
- A 12-month guarantee on all work
- Experience in homes, commercial sites and hotels
- Old sealant always removed completely
- We are fully insured
Looking after it afterwards
Looking after new joints is easy:
- Walk round the building once a year and look at the joints
- Show decorators and builders where the movement joints are
- Act on the first splits you see
- Clear growth from the base of walls and joints
Give the sealant the cure time we tell you before anything rubs against it. Most exterior sealants skin fast but take longer to cure right through.
Leave a failed movement joint and water keeps getting into the wall. Over time it can mean damp inside, stained render or frost-damaged brick which cost more to put right than the joint.
How the visit works
Every visit runs the same way: we check the joints, protect the area around them, carry out the job and clear up. Most jobs take a few hours to a few days, depending on the length of joint and the access. For a village or hamlet like Queen's Bower, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We start by walking round the building and agreeing the joints and the access.
- We cut out the old mastic and rake out anything in the joint.
- The faces are brushed clean and primed where the product requires it.
- Backing rod sized to the joint goes in to set the depth.
- We apply the sealant, tool it and check the whole run.
How to prepare
- For indoor joints, keep the area dry beforehand if you can
- Tell us about any water getting in
- Clear items away from the joints we are working on
Getting a quote
We quote each job on its own. Just ring 0345 464 0079 or send us an email with the details.
Advice
What external mastic looks like in Queen's Bower
Queen's Bower is within about 2 miles of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on movement joints and outside wall joints, which can dry out and crack sooner where a building faces the weather. Rainfall in the South East is lower than in much of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
For an older house near a landmark such as All Saints' Church, older walls, gutters and the joints where extensions meet them need a flexible sealant. Rented homes near Sandown station change hands often, and failed wall and movement joints let damp in, so they’re worth checking between tenancies.
Queen's Bower is about 5 miles south of Ryde, in the Isle of Wight. From the centre of Queen's Bower to the outskirts, external mastic is available for homes and businesses alike, from flats and houses to offices and hotels. Our area takes in 125 places across the Isle of Wight, from the larger towns to small villages. For nearby work, see our Portsmouth page (12 miles or so).
We work across the PO36 postcode area for external mastic and the streets around it. Other places close to Queen's Bower include Skinner's Hill (1 mile north-west), Alverstone Garden Village (1 mile north-east), Alverstone (1 mile north-east), Lake (1 mile south-east) and Sandown (1 mile east). Larger places within reach include Newport (5 miles north-west), Ryde (5 miles north), Cowes (8 miles north-west), Ventnor (4 miles south), East Cowes (8 miles north-west) and Oakfield (5 miles north). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Local landmarks in Queen's Bower
Locally, jobs take us to homes and businesses close to Sandown Bay Academy and The Pointer Inn, among other places. Queen's Bower’s nearest station is Sandown station, about 1.4 miles east. Other landmarks nearby include Sandown Castle (2 miles east) and Wight Aviation Museum (0.6 miles south-east). Not far away are Brading Down and Alverstone Mead.