Falkirk · Scotland
External & façade joints in Dunipace, Falkirk
Sealing brickwork movement joints, render, cladding and façade joints for homes and businesses in Dunipace and across Falkirk. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Brick movement joints where the sealant has split
- Sealant that has lost its bond to the brick or render
- Leaking joints around cladding and façade panels
About our external mastic in Dunipace
Many failed façade joints only get noticed once there’s a stain or a damp patch inside. We inspect them, agree which need doing and reseal with a weatherproof, flexible sealant. If you have cracked joints where brick meets render or frames and rain getting behind render or cladding at a joint, we can put it right.
Across smaller places in Scotland, stone and harled cottages, farm buildings and newer houses often stand exposed to wind and rain. Outside joints on exposed walls work hard.
You are covered for a year from the day we finish. If anything is not right with it, email us at info@mrmastic.co.uk.
- Place
- Dunipace (FK6)
- Region
- Falkirk
- Guarantee
- A year, on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
External mastic in Dunipace: local notes
Plenty of Scottish homes have harled walls, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface. Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and failed outside joints work against that.
For landlords with property near Larbert station, split movement joints are easy to miss on a rental until damp shows inside.
Dunipace is about 5 miles west of Falkirk, in Falkirk. Anywhere in FK6, our applicators can take on external mastic. Across Falkirk, we cover 50 places, Dunipace among them. For nearby work, see our Glasgow page.
Work in FK6 works the same way as everywhere else we cover. Streets in the area include Stirling Street, Thistle Avenue and Church Lane, and we cover them all. Neighbouring places we cover for external mastic include Stoneywood (1 mile south-west), Denny (1 mile south), Fankerton (1 mile west), Head of Muir (1 mile south) and Dennyloanhead (2 miles south). We also work in nearby towns such as Falkirk (5 miles east), Grangemouth (8 miles east), Bo'ness (12 miles east), Larbert (3 miles east), Stenhousemuir (4 miles east) and Bantaskin (5 miles south-east).
Local landmarks in Dunipace
For rail, the closest station is Larbert station, about 3.3 miles east. Nearby you’ll also find Forth Valley Royal Hospital (2.6 miles east) and Herbertshire Castle (less than half a mile south-west). Green spaces nearby include Myot Hill.
Should I try it myself first?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
A DIY attempt does not rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
How we quote for external mastic
Jobs vary more than people expect. What affects the quote:
- Mould in or behind the old joints
- How many rooms, windows or areas are involved
- The old material and how stubborn it is
- The size of the job
The cost reflects the work involved, not a rough estimate. That’s why we ask a few questions first and give you a clear price before we start.
What to tell us for a quote
You do not need to know the technical terms. It helps if you can tell us:
- A few photos by email, if you can
- If someone has resealed it before
- The rough size of the job
- What’s wrong with the joints now
Getting a quote is simple: let us know what needs doing and where. Photos by email help us understand the job, and we’ll take it from there.
Why deal with it now?
A properly done movement joint is an even line in a colour that suits the wall. A rushed bead with no backing looks untidy and does not last. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water behind a failed seal does the most damage when nobody’s watching.
Leaving a failed joint normally makes the job bigger, not smaller. If you are not sure whether it needs doing, send an email to info@mrmastic.co.uk for an honest opinion and a quote.
Why book with us
- 4.9 on Google from 180+ five-star reviews
- We are fully insured
- Sanitary silicone with an anti-fungal additive in wet areas
- An ARBOMaster approved applicator
Read our cost guide or what customers say.
Signs you need external mastic in Dunipace
Sometimes a movement joint was filled with mortar or a rigid filler, often by someone who didn’t know what it was for. The joint cannot move, so the wall cracks somewhere else instead.
People usually contact us when they notice one of these:
- Moss and dirt in joints with no sealant left
- Sealant pulling away from one side of the joint
- Damp patches traced to an open external joint
- Gaps where render, brick and frames meet
If you look after a building such as Denny High School, larger buildings have long runs of movement joint that eventually need resealing.
What to look for in a quote
- What happens if the job turns out different
- Is the old sealant removed completely?
- How long to leave it before use
- How the joint is cleaned and prepared
Aftercare tips
Simple care keeps the joints in good condition. We recommend:
- Walk round the building once a year and look at the joints
- Have failed joints looked at early
- Wash walls gently around the sealant
- Leave the joints unpainted unless we’ve said otherwise
If you have more work done on the wall, such as new render, cladding or an opening, show the contractor the movement joints. They must stay as flexible joints, never rendered or pointed over.
Gaps, plants or missing sealant in a joint are worth getting looked at. Earlier resealing means a smaller job and a better result.
Questions from Dunipace
Do you cover smaller places like Dunipace?
Yes, we do. We work across all of Scotland, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you work for landlords with property near Larbert station?
Yes, we work for letting agents and landlords. You can send an email to info@mrmastic.co.uk with the address and a few details, and we will give you a fixed price before we start.
Will the new joint stand out?
We choose a sealant colour to suit the brick, stone or render, so the joint sits quietly in the wall. There’s a wide choice of exterior colours.
Do you guarantee your work?
Yes. Every job comes with our 12-month guarantee.
Can you do several jobs on one visit?
Yes. More than one area can go on one quote.
What’s an expansion joint in brickwork?
A vertical gap in a long brick wall is usually a movement joint. It lets the bricks expand without cracking and needs a flexible seal, not mortar.
Why do you put foam in the joint first?
Backing rod controls the sealant depth and keeps it off the back of the joint. That way it bonds to the two sides only and can stretch.
What do you put in the joint?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we will explain our choice.
How it works
There’s no need to move everything out before we come, only the area right around the joints. We protect the rest, and the job takes anything from a few hours to several days, depending on the building for a typical job. In smaller Scottish places, parking is normally less of an issue than access and distance. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- First, the joints are inspected and the access agreed.
- Every bit of old sealant and any mortar or debris is cut out.
- Joint faces are cleaned back and primed if the sealant needs it.
- Backing rod sized to the joint goes in to set the depth.
- We apply the sealant, tool it and check the whole run.
Preparing for the visit
- Tell us if parking is tricky
- Tell us about any water getting in
- Mention if the joints have been sealed before
Getting a quote
We don’t publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, send an email to info@mrmastic.co.uk.
Read more
When something else is needed
A few problems are outside what sealant work can do:
- Cracking across the wall rather than at a joint
- Render that is blown, hollow or coming away
- Walls that need new movement joints cut into them
If you’re not sure, just send an email to info@mrmastic.co.uk and we will give you a straight answer before booking.
Where we work in Dunipace
- Copings & trims
- Joints between brick and frames
- Brickwork movement joints
- Render & cladding joints
- Concrete & block
- Façade panels