Brighton and Hove · England
Commercial Sealant in Rottingdean
Washrooms, bathrooms and kitchens in Rottingdean need attention? We cut out the old, prepare the joints and apply the right sealant.
- Leaking joints in shower rooms and changing areas
- Large numbers of bathrooms needing the same work
- Mouldy bathrooms flagged at a tenancy check
For landlords and businesses
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.
We also work for property managers and facilities teams. We can quote a run of properties together, and we’re fully insured.
How we handle commercial sealant in Rottingdean
Commercial work is planned around the building, not the other way round. Rooms can be done one at a time, floor by floor or in batches, and out-of-hours work or early starts can be arranged. If you have worktop sealant that has shrunk and stained and tired sealant in let properties, we can help.
Work in a small place like Rottingdean is planned ahead, journey included, so the job can fit around bookings, guests or opening times where possible.
Whatever the size of the job, it’s backed by our 12-month guarantee in Rottingdean and across Brighton and Hove.
- Location
- Rottingdean (BN2)
- Region
- Brighton and Hove
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
The process
When we arrive, we start by going over the job with you, so there are no surprises. Surfaces next to the work are protected before we start. The work usually takes anything from a few hours to several days, depending on the number of rooms. Somewhere like Rottingdean needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We start by looking at the rooms and agreeing what’s needed.
- We agree when we’ll work, with early or out-of-hours slots where they can be arranged.
- Areas are protected and the failed sealant removed.
- Once dry, every joint is resealed and tooled.
- We let your team know the cure time for every area.
Getting ready for the visit
- Let us know if you’ve seen damp or leaks
- Mention any parking rules near the property
- Mention if the joints have been sealed before
How to get a quote
Call for a quick quote, or email us if that is easier. Describe what needs sealing and we will explain what’s involved before giving you a price.
Advice
How the job changes by surface
Hotel bathrooms
Hotel showers and baths get used and cleaned every day, so we use anti-fungal sanitary silicone and finish joints smooth for easy cleaning.
Student & care accommodation
Empty rooms between terms or tenancies are easy to reseal.
Common problems we fix in Rottingdean
Commercial buildings settle and move with temperature, and lightweight partitions flex more than masonry. Joints between different materials take the strain.
These are the problems we are asked about most:
- Joints that need doing before an inspection or audit
- Black, stained silicone in guest bathrooms
- Whole floors of tired en suites
- Rental bathrooms that need resealing between tenants
Managing a site like Longhill High School? Then sealant in washrooms, kitchens and changing areas can be renewed around term times or opening hours.
Questions to ask before you book
- How long the guarantee is
- Is the old sealant removed completely?
- Whether you can choose the colour
- How much experience the applicator has
How to look after the new joints
A little care helps the new joints last. We recommend:
- Schedule work around occupancy
- Leave squeegees in busy showers
- Keep strong chemicals and scourers off the joints
- Log resealing so you know what’s due
Squeegees in guest and staff showers help: less water sits on the joints between uses.
Watch for the warning signs: black spots in the silicone, corners lifting, staining on the ceiling below or a musty smell. When you see them, it’s time to plan a reseal.
Common questions in Rottingdean
Is Rottingdean in your area for commercial sealant?
Yes. We work across London and the South East, and Rottingdean is part of that. Just call 0345 464 0079 or send us an email with a few details of the job, and we will send you a clear quote.
I let a flat near Moulsecoomb station. Can you help?
Yes, rental work is part of what we do. Just call 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear quote.
Can you send RAMS and insurance details for our site?
Tell us what your site asks contractors for. We’ll confirm what we can provide alongside the quote.
How long will you be here?
That depends on how much there is to do, but most jobs take a few hours for a single washroom, longer for a whole building. We will tell you when we quote.
What do you need from me for a quote?
Where the job is, what the problem is and roughly how big it is. If you can, email a few pictures.
Does someone need to be in?
It depends on the job. Inside work needs someone to give us access.
Do you take out the old sealant first?
Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.
Will there be a smell?
There can be a smell while the sealant cures, which fades as it sets. Opening a window helps.
What commercial sealant looks like in Rottingdean
If you run a hotel, guest house or holiday let in a coastal place like Rottingdean, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For buildings such as St Wulfran's Church, halls and community kitchens see heavy use, and their sealant shows it. Rented homes near Moulsecoomb station change hands often, and sealant work can be quoted for a single flat or a whole portfolio.
Rottingdean is about 3 miles west of Telscombe, in Brighton and Hove. Whether you are in the middle of Rottingdean or further out, we cover commercial sealant for every kind of property. Rottingdean is one of 30 towns and villages in Brighton and Hove we cover.
Here we cover the BN2 postcode area for commercial sealant. You will find streets such as Longhill Road, New Barn Road and Court Ord Road, and we cover them all. Nearby, we also carry out commercial sealant in Ovingdean (1 mile west), Roedean (1 mile west), Saltdean (1 mile south-east), East Saltdean (2 miles south-east) and Telscombe (3 miles east). Within a short drive, we also cover Brighton (3 miles north-west), Brighton and Hove (6 miles west), Hove (5 miles west), Carlton Hill (3 miles west), Hanover (3 miles west) and West Hill (4 miles west).
What’s near Rottingdean
Around Rottingdean, our work takes us to homes and buildings near Ovingdean Hall School, Our Lady of Lourdes RC School and Beacon Hill, among other places. Rottingdean’s nearest station is Moulsecoomb station, roughly 3.2 miles north-west. Well-known places in the area include Churchill Square (3.6 miles west) and French Convalescent Home (1.9 miles west). Green spaces nearby include Beacon Hill Local Nature Reserve and Newmarket Hill.
What else we do in Rottingdean
How we quote for commercial sealant
Your quote is based on your job. We take into account:
- The old material and how stubborn it is
- Mould in or behind the old joints
- Working hours on commercial sites
- How many areas need sealing
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Call for a quick quote and we will explain what it covers.
What we need to know
You do not need to know the technical terms. Just tell us:
- The type of property
- Roughly how big the job is
- Whether it has been sealed before
- What the problem is, such as mould, gaps, leaks or cracking
We do not publish a price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To get started, phone 0345 464 0079 or email us.
DIY sealant or a professional job?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.