Dundee · Scotland
Commercial & hotel sealant in Inveraldie, Dundee
Problem with your washrooms, bathrooms and kitchens in Inveraldie? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Shower leaks reaching the floor below
- Black, stained silicone in guest bathrooms
- Whole floors of tired en suites
DIY versus a professional finish
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Commercial sealant for homes and businesses in Inveraldie
Staff facilities can’t be out of action for long. We can plan the work for early mornings or out of hours so the working day is disturbed as little as possible. You are told when each area can be used again. We work on hotel bathrooms, welfare facilities and rental portfolios, and people most often call us about worktop sealant that has shrunk and stained and large numbers of bathrooms needing the same work.
For holiday lets, guest houses and community buildings in or near Inveraldie, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
The work is covered for a year after we finish. If there’s a problem with it, please email us at info@mrmastic.co.uk.

- Location
- Inveraldie (DD4)
- Wider area
- Dundee
- Guarantee
- A year, on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
How the visit works
A visit follows a simple pattern: we look at the joints together, mask and protect the surrounding surfaces, carry out the job and tidy away. It usually takes a few hours per room, so whole buildings are phased. In smaller Scottish places, parking is generally less of an issue than access and distance. Tell us how to find the property and how to reach the work.
- First we visit and agree the scope, the sequence and the working hours.
- Each area is protected and the old sealant cut out completely.
- The joints are degreased, treated and left to dry.
- We lay the right sealant for each area, with anti-fungal silicone in wet rooms.
- We check every room and give its cure time for housekeeping.
How to prepare
- Let us know about parking restrictions
- On commercial sites, let us know about site rules
- For indoor joints, keep the area dry beforehand if you can
Get a quote
We don’t publish a price list, because every job is different. Instead, we give you a clear price for your job. To get started, drop us a line at info@mrmastic.co.uk.
Advice
What we cannot put right
It helps to know what we can’t do too:
- Leaking pipework, valves or wastes (a plumber’s job)
- Tiles coming off the wall
- Extraction that isn’t working, which needs an electrician or ventilation contractor
If you’re not sure, just email us at info@mrmastic.co.uk and we’ll give you a straight answer before you book.
What we seal
- Welfare facilities
- Office washrooms & kitchens
- Retail & leisure sites
- Rental portfolios
- Hotel bathrooms
- Student & care accommodation
Different surfaces, different methods
Student & care accommodation
Care homes need careful planning around residents, with each bathroom handed back with its cure time.
Rental portfolios
Between tenancies is a good time to reseal, ready for the next tenant.
When to call us in Inveraldie
A rushed reseal between guests rarely lasts. Sealing over old silicone, sealing wet joints or using the wrong product all lead to the same thing: another reseal before long.
Keep an eye out for these signs:
- Silicone laid over old silicone by a previous contractor
- Black, stained silicone in guest bathrooms
- Tired sealant in let properties
- Shower leaks reaching the floor below
Community buildings like Tealing Parish Church And Churchyard are part of the picture too: any kitchen and washrooms need the same sealant care as any other building.
What to look for in a quote
- Whether they seal over old material or remove it
- What preparation is included
- Is VAT in the price?
- Are they insured?
Common questions in Inveraldie
Is Inveraldie within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
Do you work for landlords with property near Dundee station?
Yes. We work for letting agents and landlords as well as homeowners, and several properties can go on one quote. Just send an email to info@mrmastic.co.uk with the address and what needs doing, and we’ll give you a clear price.
Do you take out the old sealant first?
Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Do you guarantee commercial jobs?
Yes. Our 12-month guarantee covers commercial work too.
Where are you based?
We are based in Crawley, and we cover South East England, London and all of Scotland.
Should I try DIY first?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
How long does the job take?
A typical job takes a few hours per room, so whole buildings are phased, including the preparation. We’ll confirm how long when we quote.
Does someone need to be in?
Access is agreed with you when the job is booked. For inside work, that normally means someone being in.
Places near Inveraldie
Also in Inveraldie
Commercial sealant in Inveraldie: local notes
Private landlords in Scotland must meet the Repairing Standard, and keeping sealant sound across a portfolio is part of that.
If you look after a building such as Braeview Academy, washroom and kitchen sealant can be programmed around term times or opening hours. For landlords with property near Dundee station, several rental properties can be resealed on one programme.
Inveraldie is about 4 miles north of Dundee, in Dundee. We provide commercial sealant to homes and businesses in Inveraldie and nearby, as part of our work across Dundee. Inveraldie is one of 50 towns and villages in Dundee where we work.
Work in DD4 works the same way as everywhere else we cover. Local streets include Hall Place, Dalziel Road and Inveraldie Crescent, all of which we cover. If you are just outside Inveraldie, we cover Tealing (1 mile north-west), Barns of Claverhouse (1 mile south), Burnside of Duntrune (2 miles south-east), Claverhouse (2 miles south) and Mill of Mains (2 miles south). We also work in nearby towns such as Dundee (4 miles south), Broughty Ferry (4 miles south-east), Stobswell (4 miles south), Monifieth (5 miles south-east), Blackness (5 miles south-west) and Barnhill (5 miles south-east).
Around Inveraldie
Inveraldie’s nearest station is Dundee station, about 4.6 miles south of the centre. Other landmarks nearby include Maryfield Hospital (3.2 miles south) and Powrie Castle (1.5 miles south). The countryside around Inveraldie includes Gallow Hill and Trottick Mill Ponds.
For landlords and businesses
We work for landlords and agents as well as householders. Resealing between tenancies is a simple way to keep a property in good order.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll give you a quote.
What affects the quote in Inveraldie
Call for a quick quote. What matters most is:
- Any working-time requirements on site
- Whether there’s mould to deal with
- The product the joint needs
- Whether old sealant or filler has to be cut out
The cost reflects the work involved, not a rough estimate. That’s why we ask about the job first and give you a clear price before work begins.
What to tell us for a quote
Photos help, but a description is a good start. Try to tell us:
- If someone has resealed it before
- A few pictures by email, if you can
- The problem you’ve noticed
- The address or postcode of the job
Getting a quote is simple: let us know the job and the location, and roughly how big it is. A few photos by email make the job easier to understand, and we will take it from there.
