Orkney Islands · Scotland
Wasbister Bathroom Resealing
We cover Wasbister for bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly and a 12-month guarantee.
- A joint torn by a bath that flexes
- New sealant laid over old sealant that is now lifting
- Water getting behind the bath panel
Bathroom resealing in Wasbister, done properly
Homes in Wasbister have the same weak spots as anywhere else: bath edges, tray joints, basin backs and kitchen upstands. Every joint is cut out, cleaned and left dry before it’s resealed. We work on kitchen worktops & upstands, sinks & splashbacks and wet rooms, and common reasons people get in touch are two layers of silicone, both failing and water getting behind the bath panel.
Being further from a city does not change the work: old material out, joints cleaned and dried, and a fresh, even finish. The journey and access are simply planned in advance.
Whatever the size of the job, you get the same 12-month guarantee in Wasbister and across the Orkney Islands.
- Where
- Wasbister (KW16)
- Region
- Orkney Islands
- Guarantee
- One year on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Leave it or put it right?
Tired sealant is not a reason to replace a bath or shower. Replacing the joint is usually all it takes, as long as the fittings themselves are sound. If we find a deeper problem, you’ll hear it from us. Out of town in Scotland, exposed walls take a lot of weather, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all play a part.
What you get with us
- We leave the area clean and tidy
- 180+ five-star Google reviews
- Anti-fungal sanitary silicone in wet areas
- We never seal over old sealant
See our cost guide and customer reviews.
What else we do in Wasbister
Aftercare tips
So the new joints stay in good condition:
- Wait for the cure time we give you
- Move toiletries away from the joint
- Never pick at the silicone with a blade
- Clean with a mild bathroom cleaner and a soft cloth
Clean the silicone with care: warm soapy water and a soft cloth do the job. Scourers and blades can nick the surface, and a nicked bead lets mould in sooner.
Worktop joints fail quietly. Water gets behind the upstand and into the edge of a laminate worktop, where it can make the board swell. A reseal in time can save the worktop.
DIY versus a professional finish
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Wasbister homes and their sealant
Wasbister is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Island jobs need planning around ferries and the weather, so the more notice, the better.
For jobs in and around Wasbister, choosing the right material for each joint is as important as a tidy finish.
Wasbister is about 11 miles west of Kirkwall, in the Orkney Islands. We carry out bathroom resealing for homeowners, landlords and businesses in Wasbister and nearby. Across the Orkney Islands, we cover 51 places, and Wasbister is one of them.
Postcode districts we cover here for bathroom resealing: KW16. You will find Wasbister on the B9055, so it’s easy for us to get to. We also cover the places around Wasbister: Tenston (1 mile north), Grimeston (2 miles east), Russland (2 miles north-east), Bimbister (3 miles east) and Harray (3 miles north-east). If you’re somewhere remote, the job takes a little more planning, so let us know when you get in touch.
What’s near Wasbister
A little further out are Skara Brae Visitor Centre (3.6 miles north-west). Not far away are Brodgar RSPB Reserve and Hill of Miffia.
What the job involves on each surface
Shower trays & enclosures
The vertical joint where a screen profile meets the wall is a common leak point. We reseal it along with the base of the enclosure, following the enclosure maker’s guidance on which side to seal.
Baths
Acrylic baths give a little under load, while steel and cast iron baths move less but still settle when full. Filling the bath first allows for that movement.
Honest limits
We’d rather tell you now than do work that won’t last, so here’s what sealant cannot put right:
- A cracked shower tray or bath (that needs repair or replacement)
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- A bath or tray that moves because it is not properly supported
If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think.
Joints and surfaces we work on
- Kitchen worktops & upstands
- Shower trays & enclosures
- Wet rooms
- Sinks & splashbacks
- Baths
- Basins & vanity units
Wasbister: your questions answered
Do you cover Wasbister for bathroom resealing?
Yes. Our work covers the whole of Scotland, and Wasbister is part of that. Just send an email to info@mrmastic.co.uk with a few details of the job.
Is there a guarantee on bathroom resealing in Wasbister?
Every job comes with our 12-month guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
Where are you based?
We’re based in Crawley, and we work across South East England, London and Scotland.
When can I use the bath or shower again?
Around 24 hours is typical, and we confirm the time for the product used. Using it sooner can damage the bead.
How long will the resealing take?
Allow a couple of hours for a single bath or shower. You’ll know how long to expect before work begins.
How do I get a quote for bathroom resealing in Wasbister?
We do not publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. You’ll get a clear quote before any work starts.
Can you work on commercial sites?
Yes. Hotels, offices and other businesses use us.
Do you take out the old sealant first?
Always. Sealing over the old bead is the commonest cause of early failure, so we never do it.
What happens on the day
We keep the work tidy and contained to the joints we are treating. Expect the work to take two to three hours for a typical bath, depending on how much old sealant there is. Somewhere like Wasbister may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- First the area is protected and every bit of old sealant removed.
- The joint is cleaned, degreased and treated for mould.
- We let it dry fully and fill the bath with water before sealing.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- Finally we tidy up and explain the cure time before we leave.
Getting ready for the visit
- Tell us about any water getting in
- For business premises, tell us about site rules or sign-in
- Clear the area around the work
How to get a quote
Getting a quote is simple: tell us what needs doing and where, and roughly how big it is. Photos by email help us understand the job, and we will come back to you with a quote.
Advice
When to call us in Wasbister
Plenty of failed sealant has been laid over the top of older sealant. New silicone will not bond to old silicone, so it lifts, lets water in and traps mould underneath.
The problems people normally mention when they call are:
- New sealant laid over old sealant that is now lifting
- Damp behind the bath or under the tray
- A messy, uneven bead from a previous reseal
- Gaps where the bath or tray has moved
In and around Wasbister, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
What to look for in a quote
- How long the guarantee is
- How long to leave it before use
- Whether the sealant suits the joint
- How much experience the applicator has