Surrey · England
Tilford Reeds Bathroom Resealing
Baths, showers and worktops in Tilford Reeds need attention? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Shrunken sealant along the back of a worktop
- Black mould in the silicone that will not clean off
- A reseal done over the top of the old bead
Bathroom resealing for homes and businesses in Tilford Reeds
A shower joint gets soaked every day. Trays, enclosures, screen profiles and wet room floors all need a flexible, waterproof seal. Each gets a bead of anti-fungal sanitary silicone, finished smooth so water drains away rather than collecting. If you have water escaping at the shower enclosure and mouldy sealant that has gone black, we can put it right, whatever the surface.
Homes around Tilford Reeds are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
Each job carries a 12-month guarantee, whatever its size.
- Location
- Tilford Reeds (GU10)
- Wider area
- Surrey
- Guarantee
- 12 months on all our work
- Quote
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
What affects the cost of bathroom resealing
Every job gets its own quote. This is what makes a difference:
- Whether the work is at height
- The product the joint needs
- How many rooms, windows or areas are involved
- Working hours on commercial sites
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
Helping us quote
There’s no need for technical detail. It helps if you can tell us:
- Photos by email, if that is easy
- If someone has resealed it before
- Roughly how big the job is
- Where the job is, and your postcode
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we’ll explain what’s involved before giving you a price.
Aftercare tips
After the cure time, these simple habits help:
- Don’t let bottles sit on the bead
- Avoid abrasive pads on the sealant
- Keep an eye on the corners, where splits start
- Give the silicone its full cure time
Clean the silicone with care: a mild bathroom cleaner and a soft cloth is enough. Scourers and blades can nick the surface, because a damaged bead gives mould a foothold.
Worktop joints fail quietly. Splashes run behind the back edge and soak into the worktop, where it can make the board swell. Resealing before that happens protects the worktop.
When it is not the sealant
A few problems are outside what sealant work can do:
- Water coming from the plumbing rather than the joint
- Movement from a bath with loose feet or no proper support
- A cracked shower tray or bath (that needs repair or replacement)
Not sure which it is? You can phone 0345 464 0079 or send us an email and we’ll tell you honestly.
Joints and surfaces we work on
- Baths
- Basins & vanity units
- Sinks & splashbacks
- Wet rooms
- Shower trays & enclosures
- Kitchen worktops & upstands
Why deal with it now?
Mould removers can fade the surface of a stained bead, but mould that has grown into the sealant tends to return. The lasting answer is to remove the bead and start again. Around Tilford Reeds, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
A failed joint rarely gets cheaper to fix by waiting. If you are not sure whether it needs doing, phone 0345 464 0079 or drop us an email and we will give you an honest view and a quote.
Why Tilford Reeds customers choose us
- You choose the colour before work begins
- Full insurance on every job
- A choice of colours where the product allows
- Trusted Arbo and Everbuild sealants
See what affects the cost and what customers say.
What happens on the day
When we arrive, we look over the joints with you first, so you know exactly what we’re doing. Surfaces next to the work are protected before work begins. Most jobs take a morning or an afternoon for most single baths and showers. Somewhere as small as Tilford Reeds, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- We tool the bead to a neat finish and give you the cure time, normally around 24 hours.
How to prepare
- Move anything stored near the joints
- Mention any tricky access
- Let us know about parking restrictions
How to get a quote
For bathroom resealing in Tilford Reeds, ring 0345 464 0079 or drop us an email. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Advice
Bathrooms and kitchens in Tilford Reeds
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you live in an older home near Church of All Saints, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. If you look after a building such as All Saints CofE Aided Infant School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Letting a property close to Farnham station? Then mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Tilford Reeds is about 2 miles south-east of Farnham, in Surrey. We carry out bathroom resealing for homeowners, landlords and businesses in Tilford Reeds. Tilford Reeds is one of 395 places in Surrey where we work for bathroom resealing. You can also see our page for Reading, roughly 21 miles from Tilford Reeds.
All of GU10 is covered for bathroom resealing. We also cover the places around Tilford Reeds: Tilford (1 mile north-east), Tilford Common (1 mile south-east), Millbridge (1 mile south-west), Lower Bourne (1 mile north-west) and Shortfield Common (2 miles west). Further out, we also cover Guildford (9 miles north-east), Woking (12 miles north-east), Camberley (11 miles north), Frimley (9 miles north), Haslemere (7 miles south) and Cranleigh (13 miles east).
Near you in Tilford Reeds
Around Tilford Reeds, our work takes us to homes and buildings near Moor Park, Edgeborough School and South Farnham School and the streets around them. Tilford Reeds’s nearest station is Farnham station, about 2.3 miles north-west of the centre. Nearby you’ll also find Farnham Castle (3 miles north-west) and Museum of Farnham (2.7 miles north-west). Open spaces near Tilford Reeds include Upper Lake and Farnham Heath.
Nearby places to Tilford Reeds
Also in Tilford Reeds
Surface by surface
Shower trays & enclosures
A tray that rocks will split any sealant. Movement is checked before anything is resealed, and if the tray needs refixing, we will say so.
Basins & vanity units
Basins take less water than showers, but the joint behind them is splashed every day. Corners behind basins are where mould tends to start, and we treat it exactly as we would a bath.
Landlord and commercial work in Tilford Reeds
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will give you a quote.
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
Common questions in Tilford Reeds
Can you help a landlord with a rental near Farnham station?
Yes. We work for landlords and letting agents as well as homeowners, and several properties can go on one quote. Just call 0345 464 0079 or email us with the address and what needs doing, and we’ll send you a clear quote.
Can you do bathroom resealing in Tilford Reeds?
Yes, Tilford Reeds is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or send us an email with a few details of the job.
Do you remove the old sealant?
Yes. All of the old material is cut out and the joint cleaned before resealing.
Can you just seal over the old silicone?
No. Sealing over the top looks fine for a few weeks, then lifts, because silicone does not bond to silicone. We remove the old bead completely before resealing.
What do you need from me for a quote?
Just the basics: the address or postcode, what’s wrong and any access issues. Then phone 0345 464 0079 or drop us an email.
Are you insured?
Yes. We are fully insured.
Will you leave a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
Does the resealing come with a guarantee?
Yes. Our one-year guarantee covers every job, and we are fully insured.