Hampshire · England
Bathroom & kitchen resealing in Temple Valley, Hampshire
Bathroom resealing for Temple Valley, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Water getting behind the kitchen upstand
- New sealant laid over old sealant that is now lifting
- Leaks into the floor or ceiling below
About our bathroom resealing in Temple Valley
We fill the bath before sealing it. A full bath sits slightly lower than an empty one, so the bead isn’t stretched the first time someone gets in. It’s a small step that rushed reseals tend to skip. Typical jobs include black spots spreading through the bead and leaking joints on a shower screen, on baths, wet rooms and sinks & splashbacks.
Homes around Temple Valley are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
You are covered for a year from the day we finish. If anything isn’t right with it, phone 0345 464 0079 or drop us an email.
- Location
- Temple Valley (SO21)
- Wider area
- Hampshire
- Guarantee
- A year, on every job
- Quotes
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Work for landlords, hotels and businesses
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
We also work for property managers and facilities teams. We can quote a run of properties together, and we are fully insured.
Quotes for bathroom resealing in Temple Valley
We don’t publish a price list, because jobs vary so much. What we look at:
- Whether the work is at height
- Whether old sealant or filler has to be cut out
- The product the joint needs
- Any working-time requirements on site
What it costs depends on the amount of work, how hard the old material is to remove and how easy the joints are to reach. You will have a clear quote before any work starts.
What we need to know
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- The type of property
- The problem you’ve noticed
- How many joints, rooms or windows are involved
- Whether it has been sealed before
Need a quote? Please call 0345 464 0079 or send us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
How to look after the new joints
Good habits help new joints last longer. Our tips:
- Open a window or run the fan so the room dries
- Clean with a mild bathroom cleaner and a soft cloth
- Dry the bead with a towel now and then
- Avoid abrasive pads on the sealant
Give the silicone time to cure before it gets wet, which is generally around 24 hours. After that, a quick wipe after showering helps keep it clean.
A failed kitchen joint is easy to miss. Water gets behind the upstand and into the edge of a laminate worktop, where it can make the board swell. A reseal in time can save the worktop.
Temple Valley: your questions answered
Is Temple Valley in your area for bathroom resealing?
Yes. Our work covers London and the South East, and Temple Valley is part of that. Just phone 0345 464 0079 or send us an email with a few details of the job, and we’ll send you a clear quote.
Can you help a landlord with a rental near Winchester station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can phone 0345 464 0079 or drop us an email with the details for a clear quote.
Are you an approved applicator?
Yes. We’re approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.
Can you get rid of the black mould in my sealant?
Yes, we replace the mouldy bead. Cleaning products may lighten it, but the lasting fix is new anti-fungal silicone on a clean, treated joint. Good ventilation helps keep it away.
Do you have insurance?
Yes. We’re fully insured, and we can confirm the details when we quote.
Should I try DIY first?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
Do you do commercial work?
Yes, regularly. Larger jobs can be planned room by room or area by area.
Does someone need to be in?
That depends on where the joints are. For work indoors, someone needs to let us in.
What we cannot put right
We’d rather tell you now than do work that won’t last, so here’s what sealant can’t put right:
- A leaking waste, trap or valve
- Water getting in through the grout rather than the sealant
- Movement from a bath with loose feet or no proper support
Not sure which it is? You can call 0345 464 0079 or email us and we’ll tell you honestly.
What we seal
- Wet rooms
- Baths
- Kitchen worktops & upstands
- Basins & vanity units
- Shower trays & enclosures
- Sinks & splashbacks
Different surfaces, different methods
Basins & vanity units
A vanity top has a joint along the wall and sometimes at the sides. If water gets in, the cabinet underneath can swell, so the joint is sealed in one unbroken line.
Wet rooms
Wet room floors move slightly as they’re used, so the internal corners need silicone rather than grout. Where grout in a corner has cracked, we can replace it with sealant.
What happens on the day
Most of a good job is in the preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. All told, the work takes half a day or less for one room, longer when the kitchen is included. Somewhere as small as Temple Valley, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- The joint is cleaned, degreased and treated for mould.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you are told the cure time, generally around 24 hours.
Before we arrive
- Keep children and pets away from the work area
- Where the joints are inside, avoid wetting them before we arrive
- Mention if the joints have been sealed before
Getting a quote
For bathroom resealing in Temple Valley, call 0345 464 0079 or send us an email. Tell us what the problem is and where, and you will get a clear quote before we start.
Read more
Also near Temple Valley
More services for Temple Valley
Bathroom resealing in Temple Valley: local notes
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In and around Temple Valley, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint. Rented homes near Winchester station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Temple Valley is about 3 miles east of Hyde, in Hampshire. Jobs in Temple Valley get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Our area takes in 683 places across Hampshire, large and small. You can also see our page for Southampton, about 12 miles away.
All of SO21 is covered for bathroom resealing. Neighbouring places we cover for bathroom resealing include Easton (2 miles north-west), Winnall (2 miles west), Morestead (2 miles south-west), Ovington (2 miles north-east) and Itchen Abbas (2 miles north). Further out, we also cover Winchester (3 miles west), Eastleigh (8 miles south-west), Fareham (14 miles south), Andover (15 miles north-west), Horndean (15 miles south-east) and Totton (15 miles south-west).
Near you in Temple Valley
For rail, the closest station is Winchester station, about 3.4 miles west of the centre. Other landmarks nearby include Winchester College Treasury (3 miles west) and Wolvesey Castle (2.9 miles west). The countryside around Temple Valley includes Winnall Moors and Twyford Down.
DIY versus a professional finish
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.