Buckinghamshire · England
Bathroom & kitchen resealing in Temple, Buckinghamshire
Specialist bathroom resealing for Temple: careful preparation, the right product and tidy work. Ask us for a quick quote.
- A joint torn by a bath that flexes
- A reseal done over the top of the old bead
- Water escaping at the shower enclosure
Bathroom resealing for homes and businesses in Temple
Resealing is a small job that makes a big difference. Black, patchy sealant makes clean tiles look tired, and a neat new joint puts that right in a short visit. Just as important, it closes the gaps water would otherwise get through. Typical jobs include a messy, uneven bead from a previous reseal and water getting behind the bath panel, on wet rooms, sinks & splashbacks and basins & vanity units.
Around Temple, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
All our work comes with our 12-month guarantee.
- Location
- Temple (SL7)
- Wider area
- Buckinghamshire
- Guarantee
- One year on every job
- Quote
- A clear price before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Temple homes and their sealant
Temple has hotels and guest accommodation nearby. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For an older house near a landmark such as Church of All Saints, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. For site and facilities teams at buildings such as Bisham Church of England Academy, we reseal washrooms and kitchens in schools and businesses as well as homes.
Temple is about 2 miles south of Marlow, in Buckinghamshire. Every kind of property in Temple is covered for bathroom resealing, old or new, large or small. The work is guaranteed for a year. Across Buckinghamshire, we cover 263 places, and Temple is one of them. Our Reading page covers work nearby.
All of SL7 is covered for bathroom resealing. If you need bathroom resealing at a property on Temple Lane, Bradenham Lane and Temple Mill Island or anywhere close by, our applicators can take on the job. We also cover the places around Temple: Bisham (1 mile north-east), Marlow (2 miles north), Stubbings (2 miles south), Cookham Dean (2 miles east) and Burchett's Green (2 miles south). We also work in nearby towns such as High Wycombe (6 miles north), Chesham (13 miles north-east), Amersham (12 miles north-east), Beaconsfield (7 miles north-east), Chalfont St Peter (11 miles east) and Princes Risborough (12 miles north).
Local landmarks in Temple
Typical jobs here are in homes near Sir William Borlase's Grammar School and The Bull Inn, among other places. Temple’s nearest station is Marlow station, roughly 1.6 miles north-east. Nearby you’ll also find Marlow Community Hospital (1.7 miles north-east) and Marlow Museum (1.2 miles north-east). Green spaces nearby include Carpenter's Wood and Weycock Hill.
What we do, step by step
The work is kept neat and contained to the joints we are treating, so you can get on with your day. The job generally takes half a day or less for one room, longer when the kitchen is included. In a small place like Temple, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
Preparing for the visit
- Try not to wet indoor joints just before the visit
- Mention any leaks or damp you’ve noticed
- Keep children and pets away from the work area
How to get a quote
There’s no standard price list, because every job is different. Instead, we give you a clear price for your job. To arrange one, phone 0345 464 0079 or email us.
Advice
DIY sealant or a professional job?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Surface by surface
Baths
A bath shifts slightly every time it’s filled, so it’s filled with water before the bead goes on. That way the joint is laid with the bath at its heaviest.
Sinks & splashbacks
Water getting under the rim of an inset sink can soak the worktop. Where the sealant around the visible edge has failed, we renew it.
When to call us in Temple
Baths and trays move. Acrylic in particular gives slightly under the weight of water and a person, while a poorly supported tray can shift underfoot. Over time the joint tears or pulls away from the tile.
People usually contact us after spotting one of these:
- Shrunken sealant along the back of a worktop
- Sealant that has split, shrunk or peeled away
- Water escaping at the shower enclosure
- Mouldy sealant that has gone black
For landlords with property near Marlow station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Before booking anyone
- What happens if they find a problem under the old sealant
- How the colour is chosen
- Is VAT in the price?
- Is the old sealant removed completely?
Places near Temple
More services for Temple
FAQs for Temple
Do you cover smaller places like Temple?
Yes, Temple is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you work in hotels near Temple?
Yes, we work for hotels as well as homes and businesses. Rooms can be done a few at a time, so the building stays open.
Can you reseal around my kitchen sink and worktop?
Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then a colour-matched bead is laid.
How much does bathroom resealing cost in Temple?
We don’t publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. You will get a clear quote before any work starts.
How long before the new sealant can get wet?
We give you the cure time before we leave, and it’s generally around 24 hours. Getting it wet too early can spoil the new joint.
Can you just seal over the old silicone?
No. New silicone will not bond to old silicone, so it peels away and hides mould and water. We always take the old sealant out completely.
Can tenants book the work?
Yes. Check with your landlord; we can send the quote to them too.
What colours of sealant can you use?
White and clear are the most common choices, and other colours are available to suit tiles, trays and worktops. Let us know your preference when you ask for a quote.
What we can’t put right
We’d rather tell you now than do work that won’t last, so these are the limits:
- A bath or tray that moves because it isn’t properly supported
- Damage behind the tiles that needs a tiler
- A tray or bath that’s cracked through
If you are not sure, just phone 0345 464 0079 or drop us an email and we will give you a straight answer.
What we seal
- Shower trays & enclosures
- Basins & vanity units
- Sinks & splashbacks
- Kitchen worktops & upstands
- Baths
- Wet rooms
Landlords, agents and businesses in Temple
Landlords and letting agents in Temple can book us as well as householders. Resealing between tenancies is a simple way to keep a property in good order.
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
How to look after the new joints
How long the joints last depends on use and care. We suggest:
- Dry the bead with a towel now and then
- Look for lifting corners and small gaps now and then
- Never pick at the silicone with a blade
- Don’t let bottles sit on the bead
Mould needs damp, so keep the room aired. Use the fan, or open a window, while you bathe and for a while afterwards, so the bead dries out between uses.
A split bead lets water through every time the bath or shower is used. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Resealing early stops it.