Buckinghamshire · England

Bisham Bathroom Resealing

Baths, showers and worktops in Bisham need attention? We cut out the old, prepare the joints and apply the right sealant.

  • Lumpy, uneven sealant from a DIY attempt
  • Mouldy sealant that has gone black
  • Water getting behind the bath panel

Bathroom resealing near Bisham

Your questions about bathroom resealing in Bisham

I let a flat near Marlow station. Can you help?

Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just ring 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll send you a clear quote.

Do you take on hotel work around Bisham?

Yes. Hotel and guest-house work is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.

Do I need to be at home?

It depends on the job. Inside work needs someone to give us access.

Can I do it myself?

Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.

Do you take out the old sealant first?

Yes, always, and completely. New silicone does not stick to old silicone, so the joint is cleaned back first.

Do you reseal kitchen worktops and sinks too?

Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then we reseal in a colour to suit.

Do you have insurance?

Yes. We’re fully insured, and we can confirm the details when we quote.

Is it OK to put new sealant on top of the old bead?

No, and it’s one of the main reasons reseals fail. The old joint is stripped, cleaned and resealed from scratch.

About our bathroom resealing in Bisham

A bead that has gone black, split or come away shouldn’t be left until there’s a leak. Just ring 0345 464 0079 or drop us an email with a photo of the joints, and you’ll get a clear quote for bathroom resealing in Bisham. Common call-outs are for two layers of silicone, both failing and water getting behind the kitchen upstand, across basins & vanity units, wet rooms and baths.

Being in a small place like Bisham makes no difference to the job itself: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.

There’s a 12-month guarantee on every job, large or small.

Where
Bisham (SL7)
Region
Buckinghamshire
Cover
One year on every job
Quote
Quoted before any work starts
Call
0345 464 0079
Page updated
26 October 2026
Mr Mastic applicator smiling as he applies silicone to the corner of a bath

Can I do it myself?

If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly.

What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.

Honest limits

We won’t take on work that will not last, so here’s what sealant can’t put right:

  • A cracked shower tray or bath (that needs repair or replacement)
  • Failed grout lines across the wall
  • Tiles that have come away from the wall

If you’re not sure, just call 0345 464 0079 or send us an email and we will give you a straight answer.

What we seal

  • Wet rooms
  • Kitchen worktops & upstands
  • Shower trays & enclosures
  • Sinks & splashbacks
  • Baths
  • Basins & vanity units

Bisham homes and their sealant

Bisham has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

If you let a flat or house near Marlow station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. Schools such as Bisham Church of England Academy are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. If you live in an older home near Church of All Saints, walls and floors in older homes can move, and sealant and grout show it first.

Bisham is about 1 mile south of Marlow, in Buckinghamshire. Jobs in Bisham get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. We cover 263 towns and villages across Buckinghamshire, from the larger towns to small villages. You can also see our page for Reading, roughly 11 miles from Bisham.

We cover every part of SL7 for bathroom resealing and the streets around it. Bathroom resealing is available to properties on Bisham Court, Marlow Road and Vansittart Road. We also cover Temple (1 mile south-west), Marlow (1 mile north), Cookham Dean (1 mile east), Pinkneys Green (2 miles south) and Cookham (2 miles east). Within a short drive, we also cover High Wycombe (5 miles north), Chesham (13 miles north-east), Amersham (11 miles north-east), Beaconsfield (7 miles north-east), Chalfont St Peter (10 miles east) and Princes Risborough (12 miles north).

What’s near Bisham

Locally, jobs take us to homes and businesses close to The Bull Inn and Sir William Borlase's Grammar School, among other places. The closest station to Bisham is Marlow station, roughly 1 mile north. Well-known places in the area include Marlow Museum (0.7 miles north) and Marlow Community Hospital (1.1 miles north). Green spaces nearby include Taplow Lake and Weycock Hill.

Map of Bisham © OpenStreetMap contributors

Looking after it afterwards

A little care helps the new joints last. We recommend:

  • Keep an eye on the corners, where splits start
  • Dry worktop joints after washing up
  • Run the extractor fan during and after every shower
  • Keep bottles off the sealant line

Keep bottles and razors off the sealant line, because they trap water against the silicone. A quick squeegee after showering keeps water from sitting on the joint.

Mould that starts as a few spots spreads through the bead. When it has grown right through, it rarely cleans out. Catching it early keeps it a simple reseal.

How we quote for bathroom resealing

We don’t publish a price list. The quote depends on:

  • Whether there’s mould to deal with
  • The number and length of the joints
  • The product the joint needs
  • How much old sealant there is and how hard it is to remove

What it costs depends on the size of the job, how much old material has to come out and access to the work. You’ll have a clear quote before any work starts.

Asking for a quote

Photos help, but a description is a good start. Please mention:

  • Photos by email, if that is easy
  • The type of property
  • How many joints, rooms or windows are involved
  • The address or postcode of the job

Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. When it suits you, call 0345 464 0079 or drop us an email.

Surface by surface

Basins & vanity units

The back of a basin gets wet every time someone washes. Old sealant there often goes black at the corners, so it’s cut out and renewed just like a bath joint.

Shower trays & enclosures

There are usually two jobs in a shower: the tray-to-wall joint and the enclosure joints. Both take water every day, so both are resealed with anti-fungal sanitary silicone.

For landlords and businesses

We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.

Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.

How it works

When we arrive, we look over the joints with you first, so there are no surprises. Surfaces next to the work are protected before any work begins. Most jobs take a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. For a village or hamlet like Bisham, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.

  1. We start by protecting the area and stripping out the old bead, including the film left on the tiles.
  2. We clean and degrease the joint and treat any mould.
  3. We let it dry fully and fill the bath with water before sealing.
  4. New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
  5. We clear away and tell you when it can get wet, usually after around 24 hours.

Preparing for the visit

  • Tell us about any previous sealing or DIY attempts
  • Tell us about access, such as stairs, a lift or high-level joints
  • Mention any sign-in or site rules at work premises

Ask for a quote

We quote each job on its own, so start by telling us what you need. Just phone 0345 464 0079 or drop us an email with the details.

Get a quick quote

Read more

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job