Buckinghamshire · England
Regrouting in Temple, Buckinghamshire
Professional regrouting in and around Temple, with every bit of old sealant taken out first.
- Corners filled with grout instead of silicone
- Gaps where the shower grout has gone
- Greasy, stained grout behind the hob
Regrouting in Temple, done properly
We regroute showers, bathroom walls and floors, splashbacks and wet rooms. Some jobs are a whole room, or just the area that has failed. Either way, tiled areas in Temple are handled the same careful way. We work on kitchen splashbacks, shower walls and wet rooms, and the jobs we see most are a grout colour that no longer suits the room and cracked or crumbling grout lines.
Homes around Temple are mostly houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
A 12-month guarantee comes as standard, so you’re not left on your own once the job is done.
- Location
- Temple (SL7)
- Region
- Buckinghamshire
- Cover
- A year, on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
What regrouting looks like in Temple
There are hotels and other places to stay in and around Temple. Hotel bathrooms are part of our work as well as homes, and can be done room by room. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Managing a site like Bisham Church of England Academy? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. Homes close to Church of All Saints include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Temple is about 2 miles south of Marlow, in Buckinghamshire. If you need regrouting in Temple, it’s easy to get a quote: please phone 0345 464 0079 or drop us an email. We’re based in Crawley and cover Buckinghamshire, Temple included. Temple is one of 263 towns and villages in Buckinghamshire we cover for regrouting. Reading is on our list too, around 11 miles away.
We work across SL7 for regrouting and the streets around it. Streets in the area include Temple Lane, Bradenham Lane and Temple Mill Island. Close by, we work in Bisham (1 mile north-east), Marlow (2 miles north), Stubbings (2 miles south), Cookham Dean (2 miles east) and Burchett's Green (2 miles south). Larger places within reach include High Wycombe (6 miles north), Chesham (13 miles north-east), Amersham (12 miles north-east), Beaconsfield (7 miles north-east), Chalfont St Peter (11 miles east) and Princes Risborough (12 miles north).
Local landmarks in Temple
Locally, jobs take us to homes and businesses close to Sir William Borlase's Grammar School and The Bull Inn and the streets around them. For rail, the closest station is Marlow station, about 1.6 miles north-east. Nearby you will also find Marlow Community Hospital (1.7 miles north-east) and Marlow Museum (1.2 miles north-east). Not far away are Carpenter's Wood and Weycock Hill.
How the visit works
You do not need to clear the whole room or building, only the area right around the joints. Everything nearby is protected, and the work takes anything from a few hours to a full day, depending on the area in most cases. Somewhere as small as Temple, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We check the tiles for any that are hollow or loose.
- We rake out the grout evenly, protecting the tile edges.
- We vacuum the joints so the new grout bonds.
- We regrout the joints and clean the tile faces.
- Silicone goes into the corners and along the edges.
Preparing for the visit
- Mention any parking rules near the property
- Tell us about any previous sealing or DIY attempts
- Let us know about stairs, lifts or work at height
Get a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. When it suits you, ring 0345 464 0079 or drop us an email.
Read more
Should I try it myself first?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
Signs you need regrouting in Temple
Movement behind the tiles cracks grout. Loose tiles, bouncy floors and timber walls can all do it, so we check the tiles before work begins.
Look out for these signs:
- Grout that makes sound tiles look old
- Old grout in a dated colour
- Stained grout that cleaning won’t shift
- Floor grout that will not come clean
Rented homes near Marlow station change hands often, and stained grout drags a rental down, and regrouting between lets puts that right.
Comparing quotes
- Whether VAT is included
- How the surfaces are prepared before sealing
- What guarantee comes with the work
- Which sealant they’ll use, and why
Places near Temple
Also in Temple
For landlords and businesses
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.
How the job changes by surface
Wet rooms
Regrouting a wet room helps keep water on the surface of the tiles. It does not repair failed tanking underneath.
Bathroom wall tiles
Splash areas around basins and baths stain first. We can regroute just those areas or the whole wall.
What affects the quote in Temple
Jobs vary more than people expect. What affects the quote:
- The type of sealant required
- The amount of work
- Whether old sealant or filler has to be cut out
- How many areas need sealing
Leaving a failed joint generally makes the job bigger, not smaller, as water and mould keep getting in. If you’re not sure whether it needs doing, call 0345 464 0079 or drop us an email and we will give you an honest view and a quote.
What to tell us for a quote
You do not need to know the technical terms. Just tell us:
- A few photos by email, if you can
- Whether it has been sealed before
- How we’d reach the joints
- The address or postcode of the job
For a quote, ring 0345 464 0079 or email us with the location and a short description of the problem. We will send you a clear quote before any work starts.
Your questions about regrouting in Temple
Will you come out to Temple?
Yes, Temple is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you help a landlord with a rental near Marlow station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or email us and tell us about the property, and we will send you a clear quote.
What does regrouting cost?
We do not publish prices, because the cost depends on the job: its size, the old material, access and the product needed. You’ll get a clear quote before work begins.
Do the sealants smell?
That depends on the sealant. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Do you take out the old sealant first?
Yes, always, and completely. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
Do you reseal at the same time?
In most cases, yes. Corners and edges need flexible silicone, and it makes sense to renew both together.
Will it make a mess?
We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.
Can you regrout if a few tiles are loose?
New grout cannot hold loose tiles in place. We check the tiles first and tell you if any are loose or hollow, so you can decide what to do.
Keeping the joints in good condition
After the cure time, these simple habits help:
- Skip wire brushes and scourers
- Stick to mild products for cleaning grout
- Give the walls a quick rinse after use
- Look at the sealant in the corners now and then
Keep an eye on the silicone in the corners. It’s the part that moves, so the sealant there will need renewing in time.
Once grout cracks, it tends to get worse. Water gets behind the tiles, and they can begin to come away and early regrouting can avoid a much bigger job.