West Sussex · England
Bathroom Resealing in Sullington
Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Sullington and across West Sussex. Fully insured, ARBOMaster approved and guaranteed for a year.
- A reseal done over the top of the old bead
- Lumpy, uneven sealant from a DIY attempt
- Leaks into the floor or ceiling below
About our bathroom resealing in Sullington
The secret of a lasting bead is the preparation. Every bit of old silicone comes out, down to the thin film left on the tiles, then the joint is cleaned, degreased and treated for mould. New silicone goes on only when the joint is fully dry. We’re often asked to deal with water getting behind the bath panel and splits where the tray meets the wall, across baths, wet rooms and kitchen worktops & upstands.
Around Sullington, it’s houses and cottages rather than flats. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
All our work is covered by a 12-month guarantee, wherever you are in West Sussex.
- Location
- Sullington (RH20)
- Wider area
- West Sussex
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Landlord and commercial work in Sullington
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
We also work for property managers and facilities teams in Sullington and across West Sussex. Several sites can go on one quote.
Quotes for bathroom resealing in Sullington
Jobs vary more than people expect. What affects the quote:
- Whether the work is at height
- How many areas need sealing
- Whether there’s mould to deal with
- The number and length of the joints
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part.
Asking for a quote
When you contact us, these details help:
- The problem you’ve noticed
- Pictures of the joints, sent by email
- Any previous sealing or DIY work
- The address or postcode of the job
Getting a quote is simple: let us know the job and the location and its rough size. Photos by email help us understand the job.
FAQs for Sullington
Do you work for hotels and guest houses in Sullington?
Yes. Hotel and guest-house work is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
Do you cover smaller places like Sullington?
Yes. Sullington is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you do kitchens as well as bathrooms?
Yes. We reseal worktop upstands, sinks and splashbacks, with a sealant suited to kitchens, colour-matched where it shows.
Do I need to be at home?
That depends on where the joints are. For work indoors, someone needs to let us in.
Will it make a mess?
Tidy work is part of the job. Nearby surfaces are protected, and the area is left clean when we finish.
Can mouldy silicone be sorted out?
Yes. Mould inside the bead rarely cleans out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
Do you take out the old sealant first?
Always. Sealing over old sealant is the main reason resealing fails early, so we never do it.
How long does it take to reseal a bath or shower?
Allow half a day or less for one room, longer when the kitchen is included. We will confirm how long your job needs when we quote.
DIY sealant or a professional job?
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Why deal with it now?
The difference in a professional reseal is mostly what you don’t see: cutting out every trace of the old bead, cleaning, treating mould and letting the joint dry. Without that preparation, the new bead will not last. Around Sullington, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
What you pay reflects the work, not a rough estimate. That is why we ask about the job first.
Why Sullington customers choose us
- Quality sealants from Arbo and Everbuild
- 12-month guarantee on every job
- Full insurance on every job
- An ARBOMaster approved applicator
Read what affects the cost or customer reviews.
Aftercare tips
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Stick to a soft cloth and a mild cleaner
- Give the silicone its full cure time
- Do not let bottles sit on the bead
- Wipe up water along the back of the worktop
Mould needs damp, so keep the room aired. Run the extractor fan during and after a shower, so the bead dries out between uses.
Small signs come before a leak: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. If you spot one, it’s time to reseal.
What the job involves on each surface
Basins & vanity units
Basin joints are short and close to eye level: so we keep the line tidy and even, finished in a colour that suits the basin.
Sinks & splashbacks
Around the sink, we use a product suited to kitchens, including a food-safe sealant where that’s needed. The joint is laid neatly so it’s easy to wipe.
Bathroom resealing in Sullington: local notes
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings. Sullington has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
Managing a site like Thakeham Primary School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. Letting a property close to Amberley station? Then mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. In the older streets around The Parish Church of St Mary, older homes can move a little, which is hard on rigid grout and tired sealant.
Sullington is about 6 miles north of Worthing, in West Sussex. Jobs in Sullington get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Across West Sussex, we cover 371 places, Sullington among them. For nearby work, see our Brighton page, about 14 miles away.
Jobs for bathroom resealing in RH20 works the same way as everywhere else we cover. If you are just outside Sullington, we cover Storrington (1 mile north-west), Heath Common (1 mile north-east), Washington (1 mile east), Rock (1 mile east) and Cootham (2 miles north-west). Larger places within reach include Horsham (12 miles north-east), Worthing (6 miles south), Bognor Regis (14 miles south-west), Burgess Hill (14 miles east), Littlehampton (8 miles south-west) and Shoreham-by-Sea (9 miles south-east).
What’s near Sullington
Typical jobs here are in homes near The Anchor Inn and Rydon Community College. For rail, the closest station is Amberley station, roughly 4.7 miles west. Well-known places in the area include The Storrington And District Museum (0.7 miles north-west) and Amberley Castle (4.5 miles west). For a walk, there’s Amberley Wildbrooks RSPB Reserve and Chanctonbury Hill.
The process
Every visit runs the same way: we check the joints, mask and protect the surrounding surfaces, do the work and tidy away. It normally takes two to three hours for a typical bath, depending on how much old sealant there is. Somewhere as small as Sullington, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We protect the area and cut out all of the old sealant.
- Next, the joint is cleaned and any mould is treated.
- Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- Finally we tidy up and explain the cure time before we leave.
Before we arrive
- Plan for the work area to be out of bounds to pets and children
- For business premises, tell us about site rules or sign-in
- Let us know if you’ve seen damp or leaks
How to get a quote
We do not publish a price list, because every job is different. Instead, we send you a clear quote for your job. To get started, call 0345 464 0079 or send us an email.