Kent · England

South Alkham Bathroom Resealing

We cover South Alkham for bath, shower, basin, wet room, worktop and sink resealing. Old material cut out, joints cleaned and sealed neatly and a one-year guarantee.

  • Damp behind the bath or under the tray
  • A bead that has pulled away from the tiles
  • A messy, uneven bead from a previous reseal

Need bathroom resealing in South Alkham?

When something else is needed

Some problems need a builder, plumber or other trade rather than us:

  • Cracked or missing grout between tiles (that’s regrouting)
  • Water coming from the plumbing rather than the joint
  • A bath or tray that moves because it isn’t properly supported

If you’re not sure, just ring 0345 464 0079 or drop us an email and we’ll give you a straight answer.

Where we work in South Alkham

  • Sinks & splashbacks
  • Shower trays & enclosures
  • Wet rooms
  • Basins & vanity units
  • Baths
  • Kitchen worktops & upstands

How we handle bathroom resealing in South Alkham

A bead that has gone black, split or come away shouldn’t be left until there’s a leak. Just call 0345 464 0079 or email us with a photo of the joints, and you’ll get a clear quote for bathroom resealing in South Alkham. We work on shower trays & enclosures, basins & vanity units and sinks & splashbacks, and common reasons people get in touch are a bead that has pulled away from the tiles and smears of silicone across the tiles.

Homes around South Alkham are mostly houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.

There’s a 12-month guarantee on every job.

Location
South Alkham (CT15)
Region
Kent
Guarantee
12 months on all our work
Price
A clear price before any work starts
Call
0345 464 0079
Last updated
26 October 2026
Mr Mastic applicator sealing the vertical joint between a glass shower screen and tiled wall

Questions from South Alkham

Is South Alkham in your area for bathroom resealing?

Yes, South Alkham is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or drop us an email with a few details of the job, and we’ll give you a clear quote.

Do you cover smaller places like South Alkham?

Yes, South Alkham is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.

Can you just seal over the old silicone?

No. A bead laid over old silicone soon starts to come away, because silicone doesn’t bond to silicone. Every trace of the old bead is removed first.

Can you get rid of the black mould in my sealant?

Yes, we can. The old sealant comes out, the mould is treated, and we reseal with anti-fungal sanitary silicone.

I rent my home. Can I book you?

Yes, though it’s best to check with your landlord first. Landlords are often happy for the work to be arranged.

Is it messy?

No. We protect the surfaces around the joints, and we tidy up before we go.

Do you work for letting agents?

Yes. We work for homeowners, landlords, letting agents, businesses and hotels in South Alkham.

How long before the new sealant can get wet?

After around 24 hours in most cases. We will tell you the cure time for the product we used.

Can I do it myself?

What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.

The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.

Why act early in South Alkham

Mould removers can fade the surface of a stained bead, but where mould is inside the silicone it usually comes back. The lasting answer is to remove the bead and start again. Around South Alkham, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.

What it costs depends on the amount of work, how hard the old material is to remove and how easy the joints are to reach. You will have a clear quote before any work starts.

Why choose Mr Mastic in South Alkham

  • Colour picked to suit the job
  • Neat joints and a tidy finish
  • Every job guaranteed for a year
  • Arbo and Everbuild products

See our cost guide or customer reviews.

Bathroom resealing in South Alkham: local notes

South Alkham is within about 2 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.

If you live in an older home near Church of St Anthony the Martyr, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.

South Alkham is about 4 miles west of Dover, in Kent. Anywhere in CT15, we can carry out bathroom resealing at your property. We cover 922 towns and villages across Kent, large and small. There’s also a page for Chelmsford, roughly 52 miles from South Alkham.

Every address in CT15 is covered for bathroom resealing, from the main roads to the quietest streets. You will find streets such as Meggett Lane and Alkham Valley Road, all of which we cover. If you’re just outside South Alkham, we cover Alkham (1 mile north-east), Drellingore (1 mile south-west), Chalksole Green (1 mile north), Ewell Minnis (1 mile north-east) and Wolverton (1 mile north-east). Larger places within reach include Ashford (15 miles west), Canterbury (12 miles north-west), Dover (4 miles east), Folkestone (4 miles south-west), Deal (10 miles north-east) and Hythe (7 miles south-west).

Landmarks near South Alkham

Around South Alkham, our work takes us to homes and buildings near Sladden Wood. The closest station to South Alkham is Kearsney station, about 2.8 miles north-east of the centre. A little further out are Folkestone Castle (3.2 miles south-west) and Crabble Corn Mill (3.1 miles east). The countryside around South Alkham includes Dover Western Heights and Sugar Loaf Hill.

Map of South Alkham © OpenStreetMap contributors

Do you need bathroom resealing in South Alkham?

The wrong product fails fast. Acrylic caulk and general-purpose sealants are not designed for a joint that is wet every day, so they stain, crack or go mouldy before long. A bathroom joint needs anti-fungal sanitary silicone.

These are the problems we are asked about most:

  • Sealant that has split, shrunk or peeled away
  • Two layers of silicone, both failing
  • Failed sealant on the screen profile
  • Shrunken sealant along the back of a worktop

Rented homes near Kearsney station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.

Comparing quotes

  • Are they insured?
  • Whether you can choose the colour
  • What guarantee comes with the work
  • When the joint can take water or movement

10 questions to ask before booking

Keeping the joints in good condition

No joint lasts for ever, but care makes a real difference. A few tips:

  • Keep an eye on the corners, where splits start
  • Wait for the cure time we give you
  • Wipe the sealant dry after showering
  • Keep bottles off the sealant line

Wipe up standing water along the worktop joint and keep hot pans off the bead. A dry joint lasts longer.

A few black dots in the silicone soon become a black line. Once it’s deep in the silicone, cleaning normally won’t remove it, and nearby grout often goes the same way. Catching it early keeps it a simple reseal.

How the visit works

Most of a good job is in the preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. All told, the work takes a morning or an afternoon for most single baths and showers. In a small place like South Alkham, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. First the area is protected and every bit of old sealant removed.
  2. We clean and degrease the joint and treat any mould.
  3. We let it dry fully and fill the bath with water before sealing.
  4. A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
  5. We tidy up and give you the cure time, usually around 24 hours.

How to prepare

  • Clear the area around the work
  • Let us know about parking restrictions
  • Tell us about access, such as stairs, a lift or high-level joints

Getting a quote

For bathroom resealing in South Alkham, call 0345 464 0079 or email us. Tell us what the problem is and where, and we’ll agree the price before any work begins.

Get a quick quote

Advice

What the job involves on each surface

Sinks & splashbacks

Water getting under the rim of an inset sink can soak the worktop. Where the sealant around the visible edge has failed, we renew it.

Shower trays & enclosures

Water often gets past the wall profile of a shower enclosure. It’s resealed along with the tray joints, sealing the side the enclosure’s instructions call for.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job