Highland · Scotland

Bathroom & kitchen resealing in Skye of Curr, Highland

Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Skye of Curr and across Highland. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.

  • A joint torn by a bath that flexes
  • Black spots spreading through the bead
  • Two layers of silicone, both failing

Book bathroom resealing in Skye of Curr

What the job involves on each surface

Kitchen worktops & upstands

Worktop joints get wet and wiped every day. We seal them in a colour that suits the worktop, so the line does not stand out.

Basins & vanity units

Vanity units have long, worktop-style joints against the wall. Water that gets behind can damage the unit, so a neat, continuous bead matters.

Bathroom resealing in Skye of Curr

A reseal only lasts if the joint is properly prepared. Every bit of old silicone comes out, down to the thin film left on the tiles, then the joint is cleaned, degreased and treated for mould. New silicone goes on only when the joint is fully dry. Typical jobs include black mould in the silicone that won’t clean off and sealant that has split, shrunk or peeled away, across basins & vanity units, wet rooms and baths.

In and around a place like Skye of Curr, homes range from older stone-built properties to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.

A one-year guarantee comes as standard, so you’re not left on your own once the job is done.

Mr Mastic applicator kneeling beside a white bath, sealing the joint where the bath meets beige wall tiles
Location
Skye of Curr (PH26)
Region
Highland
Cover
One year on every job
Quote
Quoted before any work starts
Email
info@mrmastic.co.uk
Last updated
26 October 2026

FAQs for Skye of Curr

Will you come out to Skye of Curr?

Yes, smaller places are covered as well as towns. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.

Can you do bathroom resealing in Skye of Curr?

Yes. Our work covers the whole of Scotland, and Skye of Curr is part of that. Just drop us a line at info@mrmastic.co.uk with a few details of the job, and we will give you a clear price.

Can new silicone go straight over the old?

No. Sealing over the top looks fine for a few weeks, then lifts. We remove the old bead completely before resealing.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are glad to have it sorted.

Are you fully insured?

Yes, we are fully insured for domestic and commercial work.

Where is Mr Mastic based?

We work from Crawley. We cover Skye of Curr and the rest of Highland, along with the rest of our area.

Do you do commercial work?

Yes. We can plan bigger jobs in stages.

What sealant do you use?

Products from Arbo and Everbuild, among others, picked for each joint. We will tell you what we are using and why.

What affects the cost of bathroom resealing

For a quick quote, just ask. What matters most is:

  • The number and length of the joints
  • Any working-time requirements on site
  • Whether the work is at height
  • The old material and how stubborn it is

A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.

What to tell us for a quote

When you call or email, these details help:

  • Photos by email, if that’s easy
  • The rough size of the job
  • How we’d reach the joints
  • If it’s domestic, commercial or a hotel

Getting a quote is simple: tell us what needs doing and where and its rough size. Photos by email help us understand the job, and we’ll take it from there.

What bathroom resealing looks like in Skye of Curr

Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that doesn’t dry out. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies.

For jobs in and around Skye of Curr, choosing the right material for each joint is as important as a tidy finish.

Skye of Curr is about 21 miles south of Nairn, in Highland. Wherever you are in the PH26 postcode area, our applicators can take on bathroom resealing. Skye of Curr is one of 253 towns and villages in Highland where we work for bathroom resealing. We also work in Aberdeen, about 59 miles from Skye of Curr.

Our applicators cover all of the PH26 postcode area for bathroom resealing and the streets around it. Close by, we work in Dulnain Bridge (1 mile north-east), Nethy Bridge (2 miles south-east), Duthil (3 miles west), Grantown-on-Spey (3 miles north-east) and Boat of Garten (4 miles south-west). For island and remote addresses, a little more planning is needed, so mention it when you ask for a quote.

Local landmarks in Skye of Curr

A little further out are Muckrach Castle (0.7 miles north) and Ian Charles Community Hospital (4 miles north-east). Green spaces nearby include Loch Garten.

Map of Skye of Curr © OpenStreetMap contributors

DIY versus a professional finish

Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.

Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.

Do you need bathroom resealing in Skye of Curr?

With age, silicone loses its stretch. In kitchens it often shrinks away from the back edge, leaving a thin gap where water and food collect. Heat from the hob and strong sprays speed it along.

Look out for these signs:

  • Leaks into the floor or ceiling below
  • Sealant that has split, shrunk or peeled away
  • Gaps where the bath or tray has moved
  • Water getting behind the kitchen upstand

Around Skye of Curr, as everywhere, bathroom resealing is only as good as the preparation behind it.

What to look for in a quote

  • Whether you can choose the colour
  • Is the old sealant removed completely?
  • How the surfaces are prepared before sealing
  • Which sealant they’ll use, and why

Choosing a sealant specialist

Leave it or put it right?

Bleach and mould sprays may lighten black marks for a while, but mould that has grown into the sealant tends to return. The lasting answer is to remove the bead and start again. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.

A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re unsure, send an email to info@mrmastic.co.uk for an honest opinion and a quote.

Why Skye of Curr customers choose us

  • Quality sealants from Arbo and Everbuild
  • Neat joints and a tidy finish
  • White, clear, grey or another colour, product permitting
  • Sealant colour chosen to suit

Take a look at what affects the cost or customer reviews.

Work for landlords, hotels and businesses

Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.

Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.

What happens on the day

You do not need to clear the whole room or building before we come, only the area right around the joints. Everything nearby is protected, and the job takes around two hours for one bath or shower, longer for a whole bathroom for a typical job. Somewhere like Skye of Curr may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.

  1. First, each joint is checked for movement and signs of water.
  2. Every trace of the old bead is removed, including the thin smear on the tiles.
  3. Joints are degreased and any mould is treated.
  4. When the joint is dry, and a bath has been filled with water, the new silicone goes on.
  5. We tool the bead to a neat finish and give you the cure time, usually around 24 hours.

Getting ready for the visit

  • Plan for the work area to be out of bounds to pets and children
  • For business premises, tell us about site rules or sign-in
  • Let us know about stairs, lifts or work at height

Get a quote

We do not publish a price list, because every job is different. Instead, we give you a clear quote for your job. To get started, send an email to info@mrmastic.co.uk.

Get a quick quote

Advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job