Medway · England
Sharnal Street Bathroom Resealing
Baths, showers and worktops in Sharnal Street need attention? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Water getting behind the kitchen upstand
- Black mould in the silicone that will not clean off
- A messy, uneven bead from a previous reseal
Bathroom resealing in Sharnal Street
With over 20 years in the trade, we reseal baths, showers and kitchens in homes across Sharnal Street. We are ARBOMaster approved and fully insured, and every job carries our 12-month guarantee. Common call-outs are for gaps where the bath or tray has moved and a messy, uneven bead from a previous reseal, on sinks & splashbacks, basins & vanity units and baths.
Homes around Sharnal Street are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Location
- Sharnal Street (ME3)
- Wider area
- Medway
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Work for landlords, hotels and businesses
We also work for property managers and facilities teams. Several sites can go on one quote.
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
What we’re called out for in Sharnal Street
Mould is the reason many people want their sealant replaced. Steamy rooms that don’t dry out keep the silicone damp for hours, and once it has grown into the bead, cleaning rarely gets it out.
People generally contact us when they notice one of these:
- New sealant laid over old sealant that is now lifting
- Water getting behind the bath panel
- Lumpy, uneven sealant from a DIY attempt
- Cracked, shrunken or lifting silicone
Letting a property close to Gillingham (Kent) station? Then a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
What your quote should include
- Whether you can choose the colour
- Whether they’re fully insured
- How long the guarantee is
- How the joint is cleaned and prepared
FAQs for Sharnal Street
Can you do bathroom resealing in Sharnal Street?
Yes, Sharnal Street is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or email us with a few details of the job, and we’ll give you a clear quote.
I let a flat near Gillingham (Kent) station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just call 0345 464 0079 or send us an email with the address and what needs doing, and we’ll send you a clear quote.
Can I choose the colour of the sealant?
White and clear are the most common choices, and other colours are available to suit tiles, trays and worktops. Tell us what you’d like when you get in touch.
Can you quote for more than one area?
Yes. Just list everything you need.
Do you do commercial work?
Yes. Larger jobs can be planned room by room or area by area to suit the site.
Where are you based?
Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.
When can I use the bath or shower again?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Leave it around 24 hours before it gets wet, or follow the cure time we give you.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Nearby places to Sharnal Street
What else we do in Sharnal Street
What we cannot put right
It helps to know what we cannot do too:
- Damage behind the tiles that needs a tiler
- Cracks in the tray itself rather than the joint
- Water coming from the plumbing rather than the joint
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we will tell you honestly.
Joints and surfaces we work on
- Wet rooms
- Baths
- Kitchen worktops & upstands
- Sinks & splashbacks
- Shower trays & enclosures
- Basins & vanity units
What the job involves on each surface
Kitchen worktops & upstands
Laminate worktops swell if water gets into the core. A sound joint along the back edge stops that.
Wet rooms
Wet room floors move slightly as they’re used, so the corners need a flexible seal, not grout. Where grout in a corner has cracked, we can replace it with sealant.
Can I do it myself?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
What happens on the day
All our tools and materials come with us in the van, so you do not need to buy or prepare anything. After a quick look at the joints together, the area is protected and the work begins. Most jobs take a morning or an afternoon for most single baths and showers. Somewhere as small as Sharnal Street, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Protection goes down around the bath, shower or worktop.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
How to prepare
- Clear the area around the work
- Let us know about stairs, lifts or work at height
- For business premises, tell us about site rules or sign-in
Getting a quote
For bathroom resealing in Sharnal Street, ring 0345 464 0079 or send us an email. Tell us what the problem is and where, and we will agree the price before any work begins.
Read more
Sharnal Street homes and their sealant
Sharnal Street is within about 2 miles of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you look after a building such as High Halstow Primary Academy, we reseal washrooms and kitchens in schools and businesses as well as homes. Homes close to Church of St Margaret include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Sharnal Street is about 5 miles north of Gillingham, in Medway. Every kind of property in Sharnal Street is covered for bathroom resealing. Every job comes with our 12-month guarantee. 68 places in Medway are on our list. Chelmsford is on our list too, around 21 miles away.
Jobs for bathroom resealing in ME3 is quoted and booked the same way as anywhere else. Other places close to Sharnal Street include Fenn Street (1 mile north-east), High Halstow (1 mile north-west), Tunbridge Hill (1 mile south-east), Kingsnorth (1 mile south-east) and Hoo St Werburgh (1 mile south-west). We also work in nearby towns such as Gillingham (5 miles south), Chatham (6 miles south), Rochester (5 miles south-west), Rainham (6 miles south), Strood (5 miles south-west) and Luton (5 miles south).
Landmarks near Sharnal Street
Around Sharnal Street, our work takes us to homes and buildings near The Hundred of Hoo Academy and The Red Dog Public House and the streets around them. For rail, the closest station is Gillingham (Kent) station, roughly 3.9 miles south of the centre. Nearby you’ll also find Upnor Castle (3.2 miles south-west) and Medway Maritime Hospital (4.5 miles south). Not far away are Bishop Saltings.
What affects the quote in Sharnal Street
You’ll get a clear quote before work begins. It’s based on:
- Access and height
- Which sealant suits the joint
- When we can work, for business premises
- Any mould that needs treating
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all play a part.
Asking for a quote
Before you ask for a quote, have a think about:
- Roughly how big the job is
- Where the job is, and your postcode
- Whether it’s a home or a business
- Whether it has been sealed before
It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. Whenever you’re ready, ring 0345 464 0079 or send us an email.