Kent · England
Bathroom Resealing in Romney Street
Bath, shower, basin, wet room, worktop and sink resealing for Romney Street, backed by a one-year guarantee. Ask us for a quote.
- Splits where the tray meets the wall
- Water getting behind the kitchen upstand
- Cracked, shrunken or lifting silicone
Bathroom resealing in Romney Street, done properly
A fresh bead of silicone changes how a bathroom looks more than most people expect. Black, patchy sealant makes clean tiles look tired, and a clean white or clear joint fixes it quickly. It also seals the gaps that let water behind the bath. We work on wet rooms, sinks & splashbacks and baths, and the jobs we see most are splits where the tray meets the wall and leaking joints on a shower screen.
Somewhere as small as Romney Street, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
Big or small, you get the same one-year guarantee.
- Where
- Romney Street (TN15)
- Region
- Kent
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Signs you need bathroom resealing in Romney Street
Sealing over old silicone is one of the commonest mistakes we find. New silicone will not bond to old silicone, so it peels, leaks and hides mould behind it.
If you can see any of these, it’s time to have the joints looked at:
- Cracked, shrunken or lifting silicone
- A reseal done over the top of the old bead
- Gaps between the worktop and the wall
- Leaking joints on a shower screen
If you live in an older home near Church of Saint Mary the Virgin, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
What your quote should include
- How the joint is cleaned and prepared
- Whether VAT is included
- The length of the guarantee
- How hidden problems are handled
What happens if it’s left?
A clean new bead makes a room look cared for, which matters if you’re letting a property or selling it. A smeared, uneven DIY bead does the opposite. Older cottages and farmhouses around Romney Street can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we’ll explain what it covers.
Why book with us
- Anti-fungal sanitary silicone in wet areas
- Any old sealant cut out fully, not covered over
- Over 20 years’ experience
- White, clear, grey or another colour, product permitting
DIY sealant or a professional job?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
What affects the quote in Romney Street
Jobs vary more than people expect. What affects the quote:
- The product the joint needs
- How much there is to do
- Whether old sealant or filler has to be cut out
- When we can work, for business premises
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote.
Helping us quote
There’s no need for technical detail. Just tell us:
- Access, such as stairs, a lift or height
- The rough size of the job
- Pictures of the joints, sent by email
- What the problem is, such as mould, gaps, leaks or cracking
Call for a quick quote, or email us if that’s easier. Describe what needs sealing and we will talk you through the work before giving you a price.
Landlord and commercial work in Romney Street
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.
If you manage several properties in or around Romney Street, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs, and photos by email help.
Your questions about bathroom resealing in Romney Street
Do you work for landlords with property near Shoreham (Kent) station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can phone 0345 464 0079 or email us with the details for a clear quote.
Do you cover smaller places like Romney Street?
Yes. Romney Street is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We explain the product when we quote.
Do you do kitchens as well as bathrooms?
Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then a colour-matched bead is laid.
Can you get rid of the black mould in my sealant?
Yes. Mould inside the bead rarely cleans out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
Are you insured?
Yes. We are fully insured, with over 20 years’ experience in sealant work.
What information do you need?
A short description and the location, with pictures by email if possible. We’ll ask anything else we need to know.
Is the work guaranteed?
Yes. All our work comes with a 12-month guarantee, and we’re fully insured.
What we can’t put right
Honest advice matters more to us than a booking, so here’s what new sealant will not do:
- A tray or bath that’s cracked through
- Cracked or missing grout between tiles (that is regrouting)
- Loose or hollow tiles, or failed tanking behind them
If you’re not sure, just call 0345 464 0079 or send us an email and we’ll give you a straight answer before booking.
Joints and surfaces we work on
- Sinks & splashbacks
- Basins & vanity units
- Wet rooms
- Kitchen worktops & upstands
- Shower trays & enclosures
- Baths
Bathroom resealing around Romney Street
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Letting a property close to Shoreham (Kent) station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Romney Street is about 4 miles north-east of Sevenoaks, in Kent. Romney Street gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Romney Street is one of 922 places in Kent we cover. We also work in London, around 18 miles away.
We cover every part of the TN15 postcode area for bathroom resealing. Whether your property is on Bower Lane and Romney Street or anywhere close by, we can help. Close by, we work in East Hill (1 mile north-east), Knatts Valley (1 mile east), Woodlands (1 mile south-east), Cotman's Ash (1 mile south-east) and Kemsing (2 miles south). Larger places within reach include Maidstone (14 miles east), Dartford (8 miles north), Sevenoaks (4 miles south-west), Royal Tunbridge Wells (14 miles south), Gravesend (10 miles north-east) and Tonbridge (9 miles south).
Local landmarks in Romney Street
Around Romney Street, our work takes us to homes and buildings near Kemsing Down and the streets around them. Romney Street’s nearest station is Shoreham (Kent) station, about 1.6 miles west of the centre. Nearby you will also find Otford Heritage Centre (2.1 miles south-west) and Kemsing Castle Bank (1.7 miles south).
Nearby places to Romney Street
What else we do in Romney Street
What happens on the day
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a morning or an afternoon for most single baths and showers. For a village or hamlet like Romney Street, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We cover the area around the joints we are working on.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
How to prepare
- Let us know if you’ve seen damp or leaks
- Where the joints are inside, avoid wetting them before we arrive
- Mention any sign-in or site rules at work premises
Ask for a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.