Surrey · England
Bathroom & kitchen resealing in Redlands, Surrey
We cover Redlands for bath, shower, basin, wet room, worktop and sink resealing. Old material cut out, joints cleaned and sealed neatly and a one-year guarantee.
- Gaps where the bath or tray has moved
- New sealant laid over old sealant that is now lifting
- Sealant that has split, shrunk or peeled away
Common problems we fix in Redlands
Mould is the reason many people want their sealant replaced. Bathrooms without good ventilation give mould all the damp it needs, and mould that has grown into the silicone usually won’t clean off.
Common reasons people contact us include:
- Gaps where the bath or tray has moved
- Water getting behind the bath panel
- A reseal done over the top of the old bead
- Water escaping at the shower enclosure
For an older house near a landmark such as Church of All Saints, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Comparing quotes
- What the quote includes, VAT included or not
- What insurance they hold
- How long to leave it before use
- Is the old sealant removed completely?
How we handle bathroom resealing in Redlands
A fresh bead of silicone changes how a bathroom looks more than most people expect. Mouldy silicone makes even a new bathroom look neglected, and a neat new joint puts that right in a short visit. Just as important, it closes the gaps water would otherwise get through. We’re often asked to deal with mouldy sealant that has gone black and a reseal done over the top of the old bead, across basins & vanity units, kitchen worktops & upstands and baths.
Homes around Redlands are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
The work is covered for a year after we finish. If anything is not right with it, phone 0345 464 0079 or email us.

- Where
- Redlands (GU10)
- Wider area
- Surrey
- Guarantee
- One year on every job
- Quotes
- A clear price before work begins
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
How to look after the new joints
After the cure time, these simple habits help:
- Dry the bead with a towel now and then
- Clean with a mild bathroom cleaner and a soft cloth
- Keep an eye on the corners, where splits start
- Move toiletries away from the joint
Mould needs damp, so keep the room aired. Run the extractor fan during and after a shower, so the silicone gets a chance to dry.
A few black dots in the silicone soon become a black line. When it has grown right through, it rarely cleans out. Replacing the sealant early keeps the job small.
Common questions in Redlands
I let a flat near Farnham station. Can you help?
Yes, we work for landlords and agents. You can call 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before work begins.
Will you come out to Redlands?
Yes. Redlands is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
How long will the resealing take?
A single bath or shower takes about a couple of hours, including cutting out the old sealant. A full bathroom and kitchen can take most of a day.
Does the resealing come with a guarantee?
Yes, for 12 months. Looking after the joint as we suggest helps it last.
My sealant has gone black. Can you sort it?
Yes. Mould inside the bead rarely cleans out for good, so the bead comes out, the joint is treated and new anti-fungal silicone goes in.
Do I have to be there?
It depends on the job. For work indoors, someone needs to let us in.
What does bathroom resealing cost?
Every job is different, so each one gets its own quote. To get one, call 0345 464 0079 or email us with a short description of the job.
Are you an approved applicator?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Redlands homes and their sealant
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Farnham station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. For site and facilities teams at buildings such as Crondall Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Redlands is about 3 miles south of Fleet, in Surrey. Every kind of property in Redlands is covered for bathroom resealing, old or new, large or small. The work is guaranteed for a year. Our area takes in 395 places across Surrey, large and small. We also work in Reading, around 16 miles away.
Jobs for bathroom resealing in GU10 works the same way as everywhere else we cover. Neighbouring places we cover for bathroom resealing include Warren Corner (1 mile east), Crondall (1 mile south-west), Dora's Green (1 mile south-east), Ewshot (1 mile east) and Bowling Alley (1 mile north-west). Larger places within reach include Guildford (12 miles east), Woking (13 miles north-east), Camberley (9 miles north-east), Farnham (3 miles south-east), Frimley (7 miles north-east) and Haslemere (12 miles south-east).
Near you in Redlands
We work in homes and buildings around The Plume Of Feathers Public House, St Nicholas' School and Court Moor School. For rail, the closest station is Farnham station, about 2.9 miles south-east of the centre. A little further out are Hart Shopping Centre (3.1 miles north) and Museum of Farnham (2.4 miles south-east). Green spaces nearby include Farnham Park and Beacon Hill.
How it works
Once we’re on site, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. Most jobs then take a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Somewhere like Redlands needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We protect the area and cut out all of the old sealant, including the film left on the tiles.
- We clean and degrease the joint and treat any mould.
- The joint is left to dry, and baths are filled with water first.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- Finally we tidy up and explain the cure time before we leave.
How to prepare
- Let us know about parking restrictions
- Tell us about any water getting in
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
Asking for a quote is easy: tell us what needs doing and where and its rough size. Photos by email help us understand the job.
Advice
What the job involves on each surface
Baths
The long joint down the side of a bath is where most leaks start, especially under a shower. We finish it with a single, even bead of anti-fungal silicone, tooled so water cannot sit on it.
Shower trays & enclosures
The vertical joint where a screen profile meets the wall is a common leak point. It’s resealed along with the tray joints, following the enclosure maker’s guidance on which side to seal.
When something else is needed
Before booking, it’s worth knowing the limits:
- Loose or hollow tiles, or failed tanking behind them
- Water getting in through the grout rather than the sealant
- Leaks from a shower valve, waste or pipework (a plumber’s job)
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we’ll tell you honestly.
What we seal
- Kitchen worktops & upstands
- Basins & vanity units
- Sinks & splashbacks
- Wet rooms
- Baths
- Shower trays & enclosures
DIY versus a professional finish
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
If you’ve already had a go yourself, that is fine. We cut it out and start again, so tell us about it when you ask for a quote.
Nearby places to Redlands
Other services in Redlands
What affects the quote in Redlands
We don’t publish a price list, because no two jobs are the same. What we look at:
- Any mould that needs treating
- The old material and how stubborn it is
- The number and length of the joints
- Any working-time requirements on site
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please phone 0345 464 0079 or send us an email and we will talk you through it.
What we need to know
When you contact us, these details help:
- Any previous sealing or DIY work
- Access, such as stairs, a lift or height
- Whether it’s a home or a business
- Roughly how big the job is
Call for a quick quote, or email us if that is easier. Describe what needs sealing and we’ll explain what’s involved.
