Highland · Scotland
Lonmore Bathroom Resealing
Baths, showers and worktops in Lonmore need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Leaks into the floor or ceiling below
- Shrunken sealant along the back of a worktop
- Two layers of silicone, both failing
What affects the cost of bathroom resealing
There’s no set price list, because no two jobs are the same. What we look at:
- Any mould that needs treating
- The product the joint needs
- Access and height
- The number and length of the joints
Combining jobs into one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
Helping us quote
To help us quote quickly, let us know:
- What the problem is, such as mould, gaps, leaks or cracking
- The rough size of the job
- Where the job is, and your postcode
- If it’s domestic, commercial or a hotel
Call for a quick quote, or email us if that’s easier. Describe what needs sealing and we’ll explain what’s involved.
Bathroom resealing in Lonmore, done properly
Across Lonmore, the joints we reseal are the ones that fail in any home: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Every joint is cut out, cleaned and left dry before it’s resealed. We work on kitchen worktops & upstands, baths and sinks & splashbacks, and common reasons people get in touch are leaks into the floor or ceiling below and black mould in the silicone that won’t clean off.
Bathrooms in smaller places like Lonmore work just as hard as those in the cities. Limescale is less of a problem with Scotland’s generally soft water, but mould still takes hold in damp sealant and grout.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Where
- Lonmore (IV55)
- Wider area
- Highland
- Cover
- 12 months on all our work
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What bathroom resealing looks like in Lonmore
Lonmore is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that does not dry out.
For jobs in and around Lonmore, choosing the right material for each joint is as important as a tidy finish. In and around Lonmore, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
Lonmore is in Highland. From the centre of Lonmore to the outskirts, bathroom resealing is available for homes and businesses alike. Across Highland, we cover 253 places, and Lonmore is one of them.
All of IV55 is within our area for bathroom resealing, from the main roads to the quietest streets. We also cover Dunvegan (1 mile north-west), Kilmuir (1 mile north-west), Colbost (3 miles west), An t-Aodann Ban (6 miles north-east) and Coillore (8 miles south-east). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Local landmarks in Lonmore
A little further out are Dunvegan Castle (2 miles north-west) and Giant Angus Macaskill Museum (1 mile north-west). For a walk, there’s MacLeod's Table.
Towns and villages near Lonmore
More services for Lonmore
Lonmore questions
Do you cover smaller places like Lonmore?
Yes, we do. Our work covers the whole of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Is Lonmore in your area for bathroom resealing?
Yes. Our work covers the whole of Scotland, and Lonmore is part of that. You can send an email to info@mrmastic.co.uk and let us know what needs doing, and we will give you a clear price.
My sealant has gone black. Can you sort it?
Yes. The old sealant comes out, the mould is treated, and we reseal with anti-fungal sanitary silicone.
What information do you need?
The location, the problem and the rough size of the job. If you can, email a few photos.
Is it messy?
Not at all. The area is protected while we work and cleaned up afterwards.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
What colours of sealant can you use?
You’re not limited to white: white, clear and colours to suit tiles and worktops. We will talk it through when we quote.
Can I add another job to the visit?
Yes. Tell us about everything you’d like done and we’ll quote it together.
For landlords and businesses
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Why it’s worth doing now in Lonmore
Dealing with sealant early is a short job: the work takes half a day or less for one room, longer when the kitchen is included. Wait for a leak and you may be looking at panels off, drying out and redecorating too. In an older home around Lonmore, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re unsure, send an email to info@mrmastic.co.uk and we’ll give you an honest view and a quote.
Why Lonmore customers choose us
- Quality sealants from Arbo and Everbuild
- Experience in homes, commercial sites and hotels
- White, clear, grey or another colour, product permitting
- A 12-month guarantee on all work
What we can’t put right
Honest advice matters more to us than a booking, so here’s what sealant cannot fix:
- Water coming from the plumbing rather than the joint
- Loose or hollow tiles, or failed tanking behind them
- A tray that rocks until it’s re-bedded
If you’re not sure, just drop us a line at info@mrmastic.co.uk and we’ll give you a straight answer before booking.
Surfaces we seal
- Shower trays & enclosures
- Sinks & splashbacks
- Kitchen worktops & upstands
- Baths
- Basins & vanity units
- Wet rooms
Aftercare tips
How long the joints last depends on use and care. We suggest:
- Open a window or run the fan so the room dries
- Let new sealant cure fully before it gets wet
- Wipe the sealant dry after showering
- Stick to a soft cloth and a mild cleaner
Mould needs damp, so keep the room aired. Run the extractor fan during and after a shower, so the bead dries out between uses.
Worktop joints fail quietly. Water gets behind the upstand and into the edge of a laminate worktop, where it can make the board swell. A reseal in time can save the worktop.
What happens on the day
Before we leave, we go over the finished joints with you and explain the cure time. The work normally takes around two hours for one bath or shower, longer for a whole bathroom, depending on how much there is to do. Outdoor work around Lonmore depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Work indoors is not affected.
- We protect the area and cut out all of the old sealant.
- We clean and degrease the joint and treat any mould.
- The joint is left to dry, and baths are filled with water first.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- Finally we tidy up and explain the cure time before we leave.
Getting ready for the visit
- Let us know about stairs, lifts or work at height
- Tell us if parking is tricky
- Keep pets and children clear of the area while we work
Ask for a quote
Getting a quote is simple: tell us what needs doing and where and its rough size. A few photos by email make the job easier to understand, and we’ll come back to you with a quote.
Read more
Surface by surface
Shower trays & enclosures
The vertical joint where a screen profile meets the wall is a common leak point. It’s resealed along with the tray joints, sealing the side the enclosure’s instructions call for.
Baths
Most bath leaks begin along the long edge, especially under a shower. It gets one smooth bead of anti-fungal silicone, tooled so water can’t sit on it.