Hampshire · England
Bathroom & kitchen resealing in Kentsboro, Hampshire
Professional bathroom resealing in and around Kentsboro, with every bit of old sealant taken out first and a 12-month guarantee.
- Splits where the tray meets the wall
- A reseal done over the top of the old bead
- Cracked, shrunken or lifting silicone
Why act early in Kentsboro
Dealing with sealant early is a short job: it takes half a day or less for one room, longer when the kitchen is included. Wait for a leak and you may be looking at panels off, drying out and redecorating too. Where a wall is exposed, as many are in small places like Kentsboro, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
What you pay reflects the work, not a rough estimate. That’s why we ask a few questions first.
Why book with us
- Old sealant always removed completely
- Sealant colour chosen to suit
- ARBOMaster approved applicator
- Anti-fungal sanitary silicone in wet areas
See what affects the cost and customer reviews.
Bathroom resealing in Kentsboro, done properly
A fresh bead of silicone changes how a bathroom looks more than most people expect. Black, patchy sealant makes clean tiles look tired, and a neat new joint puts that right in a short visit. It also seals the gaps that let water behind the bath. We are often asked to deal with black mould in the silicone that won’t clean off and two layers of silicone, both failing, on sinks & splashbacks, baths and wet rooms.
Being in a small place like Kentsboro makes no difference to the job itself: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
Whatever the size of the job, it’s backed by our 12-month guarantee.
- Where
- Kentsboro (SO20)
- Wider area
- Hampshire
- Cover
- One year on every job
- Price
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
What affects the quote in Kentsboro
Some jobs are bigger than they look, and some smaller. The main factors:
- How much there is to do
- How many rooms, windows or areas are involved
- Working hours on commercial sites
- Which sealant suits the joint
Combining jobs into one visit is normally more efficient than separate visits. You’ll get one clear quote for the whole job.
Asking for a quote
Photos by email are helpful but not essential. Please mention:
- Whether it has been sealed before
- Where the job is, and your postcode
- Any access issues, like height or stairs
- If it’s domestic, commercial or a hotel
To get a quote, phone 0345 464 0079 or email us and tell us where the job is and what the problem looks like. We will give you a clear price before any work starts.
Kentsboro homes and their sealant
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Around Kentsboro, as everywhere, bathroom resealing is only as good as the preparation behind it.
Kentsboro is about 5 miles south-west of Andover, in Hampshire. Across the SO20 area, we cover bathroom resealing for homes and businesses. 683 places in Hampshire are on our list. There’s also a page for Southampton, about 18 miles away.
Postcode districts we cover here for bathroom resealing: SO20. We cover properties on Mead Park Square, Upper Mead and Lower Mead. Neighbouring places we cover for bathroom resealing include Over Wallop (2 miles south-west), Middle Wallop (2 miles south-west), Nether Wallop (2 miles south), Fox (2 miles north) and Red Rice (2 miles north-east). We also work in nearby towns such as Winchester (13 miles south-east), Andover (5 miles north-east), Chandler's Ford (14 miles south-east), Romsey (12 miles south), Hyde (12 miles south-east) and Tidworth (7 miles north-west).
Landmarks near Kentsboro
The nearest railway station is Grateley station, roughly 2.6 miles west of the centre. Nearby you will also find Andover War Memorial Hospital (5 miles north-east). The countryside around Kentsboro includes Quarley Hill and Mill Lake.
Common problems we fix in Kentsboro
Silicone needs a clean, dry surface without any grease to stick to. Traces of soap, bath oil and old sealant stop it gripping, so a rushed job can start to lift early.
People usually contact us after spotting something like this:
- Leaking joints on a shower screen
- Lumpy, uneven sealant from a DIY attempt
- A reseal done over the top of the old bead
- Gaps between the worktop and the wall
For landlords with property near Grateley station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
What your quote should include
- Which sealant they’ll use, and why
- Whether you can choose the colour
- What the quote includes, VAT included or not
- How long to leave it before use
What we can’t put right
It helps to know what we cannot do too:
- Water getting in through the grout rather than the sealant
- Movement from a bath with loose feet or no proper support
- Leaks from a shower valve, waste or pipework (a plumber’s job)
If in doubt, call 0345 464 0079 or send us an email and we’ll say what we think before you book.
Surfaces we seal
- Sinks & splashbacks
- Wet rooms
- Basins & vanity units
- Shower trays & enclosures
- Kitchen worktops & upstands
- Baths
What we do, step by step
Once we are on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Somewhere as small as Kentsboro, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- Protection goes down around the bath, shower or worktop.
- Old sealant is sliced away and the residue removed.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
How to prepare
- Move anything stored near the joints
- Mention any leaks or damp you’ve noticed
- Tell us about access, such as stairs, a lift or high-level joints
How to get a quote
Every job is quoted individually. Simply phone 0345 464 0079 or email us and describe the job and send pictures if you have them.
Related advice
Towns and villages near Kentsboro
Other services in Kentsboro
Should I try it myself first?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Landlords, agents and businesses in Kentsboro
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
For anyone letting property in or around Kentsboro, several properties can be quoted together. Send us the addresses and the work at each.
Kentsboro questions
Can you help a landlord with a rental near Grateley station?
Yes. We work for letting agents and landlords as well as householders. You can phone 0345 464 0079 or email us with the details for a clear quote.
Do you cover smaller places like Kentsboro?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do the sealants smell?
Some sealants have a smell while they cure, which fades as it sets. Opening a window helps.
Are you an approved applicator?
Yes. Mr Mastic is an ARBOMaster approved applicator, and we are fully insured.
How long before the new sealant can get wet?
After around 24 hours in most cases. You’ll get the exact cure time before we leave.
Can you work on commercial sites?
Yes. We can plan bigger jobs in stages.
What sealant do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We will tell you what we’re using and why.
My sealant has gone black. Can you sort it?
Yes. Once mould has grown into the silicone, it usually cannot be cleaned out for good, so the bead comes out, the joint is treated and new anti-fungal silicone goes in.