Greater London · England
Kenley Bathroom Resealing
Bath, shower, basin, wet room, worktop and sink resealing for householders, landlords and businesses in Kenley. Fully insured, ARBOMaster approved and guaranteed for a year.
- A bead that has pulled away from the tiles
- Splits where the tray meets the wall
- Mouldy sealant that has gone black
Bathroom resealing in Kenley, done properly
A shower joint gets soaked every day. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. They’re resealed with anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. We work on wet rooms, baths and sinks & splashbacks, and people most often call us about smears of silicone across the tiles and a joint torn by a bath that flexes.
Hard London water leaves limescale on sealant, grout and taps alike. In Kenley, bathroom resealing is as much about a room looking cared for as about keeping water out.
Big or small, it’s backed by our 12-month guarantee.
- Location
- Kenley (CR8, CR2)
- Wider area
- Greater London
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
What bathroom resealing looks like in Kenley
London’s water is hard, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in. London has a lot of flats and conversions, and a failed shower or bath seal in one can show up on the ceiling below, so tired sealant is best dealt with early.
For an older house near a landmark such as Church of All Saints, timber floors under older bathrooms flex, so joints need a sealant that moves with them. Managing a site like Harris Primary Academy Kenley? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
Kenley is about 1 mile south-east of Purley, in Greater London. Jobs in Kenley get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Kenley is one of 764 places in Greater London we cover for bathroom resealing. We also work in London, about 12 miles from Kenley.
Work in CR8 and CR2 is quoted and booked the same way as anywhere else. You will find streets such as Oaks Road, Park Road and Roke Road. Being close to the A22, Kenley is simple for us to get to. If you’re just outside Kenley, we cover Riddlesdown (1 mile north), Sanderstead (1 mile north-east), Whyteleafe (1 mile south-east), Hamsey Green (1 mile east) and South Croydon (2 miles north). Larger places within reach include London (12 miles north), City of Westminster (13 miles north), Marylebone (14 miles north), Kensington (13 miles north), St Pancras (14 miles north) and Shoreditch (14 miles north).
Local landmarks in Kenley
We work in homes and buildings around Dollypers Hill and Riddlesdown Collegiate. There’s a railway station in Kenley itself: Kenley station. Well-known places in the area include St George's Walk (3.4 miles north) and Croydon Airport Visitor Centre (2.4 miles north). Not far away are Duppas Hill and Foxley Wood.
Surface by surface
Wet rooms
A wet room floor and its walls can move independently, so the internal corners need silicone rather than grout. Where grout in a corner has cracked, we can replace it with sealant.
Basins & vanity units
A vanity top has a joint along the wall and sometimes at the sides. Water that gets behind can damage the unit, so a neat, continuous bead matters.
Why act early in Kenley
You don’t need a new bathroom because the sealant looks bad. Replacing the joint is normally all it takes, as long as the fittings themselves are sound. If something else is wrong, we’ll tell you. In a flat in Kenley, failed sealant seldom stays inside your own four walls: water from a shower or window joint can reach the flat below, and gaps in fire-stopping matter to everyone in the building.
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part, and we will explain the quote if you ask.
What you get with us
- Fully insured
- Rated 4.9 stars on Google
- A 12-month guarantee on all work
- White, clear, grey or another colour, product permitting
Kenley questions
Could a tired shower seal in my Kenley flat affect the neighbours below?
It can, yes: water that gets past a split bead or cracked grout often runs under the tray and shows on the ceiling below. It’s far simpler to replace tired sealant early than to deal with a neighbour’s ceiling.
Is parking a problem for a job in Kenley?
Parking in Kenley, as in most of London, takes a little planning: a visitor permit or a bay close to the door helps a lot, so mention what’s available when you book.
What should I tell you?
The location, the problem and the rough size of the job. If you can, email a few photos.
Can you get rid of the black mould in my sealant?
Yes. Mould inside the bead rarely cleans out for good, so the bead comes out, the joint is treated and new anti-fungal silicone goes in.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Is white the only colour available?
You’re not limited to white: clear, white and colours chosen to suit the room. We’ll talk it through when we quote.
How much does bathroom resealing cost in Kenley?
It depends on the job, so we quote each one individually. To get one, ring 0345 464 0079 or email us and let us know what needs doing and where.
How long before the new sealant can get wet?
After around 24 hours in most cases. You will get the exact cure time before we leave.
Common problems we fix in Kenley
Black mould is behind a lot of resealing. Bathrooms without good ventilation keep the silicone damp for hours, and once it has grown into the bead, cleaning rarely gets it out.
It’s worth asking for a quote if you see:
- A reseal done over the top of the old bead
- Smears of silicone across the tiles
- Leaks into the floor or ceiling below
- Splits where the tray meets the wall
Letting a property close to Kenley station? Then mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Comparing quotes
- What happens if they find a problem under the old sealant
- Whether you can choose the colour
- The length of the guarantee
- What preparation is included
DIY versus a professional finish
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so just mention it when you contact us.
How the visit works
You don’t need to clear the whole room or building, only the area right around the joints. We protect the rest, and the work takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen for a typical job. Parking in much of London is by permit or pay-and-display, so it helps to know what’s near you in Kenley. A visitor permit or a nearby bay makes the visit run more smoothly.
- First, each joint is checked for movement and signs of water.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- We tool the bead to a neat finish and give you the cure time, generally around 24 hours.
Getting ready for the visit
- For indoor joints, keep the area dry beforehand if you can
- Keep pets and children clear of the area while we work
- Tell us if parking is tricky
Ask for a quote
Getting a quote is simple: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job, and we will come back to you with a quote.
Related advice
What else we do in Kenley
When it is not the sealant
Before you book, it’s worth knowing the limits too:
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Damage behind the tiles that needs a tiler
- A bath or tray that moves because it is not properly supported
Not sure which it is? You can call 0345 464 0079 or drop us an email and we will tell you honestly before you book.
Joints and surfaces we work on
- Basins & vanity units
- Shower trays & enclosures
- Kitchen worktops & upstands
- Sinks & splashbacks
- Baths
- Wet rooms
Landlords, agents and businesses in Kenley
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will give you a quote.
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.