Shetland Islands · Scotland

Hoswick Bathroom Resealing

Problem with your baths, showers and worktops in Hoswick? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.

  • Black mould in the silicone that won’t clean off
  • Water escaping at the shower enclosure
  • Damp behind the bath or under the tray

Bathroom resealing for Hoswick homes and businesses

Bathroom resealing for homes and businesses in Hoswick

Sealant that’s mouldy, cracked or peeling shouldn’t be left until there’s a leak. A photo of the joints helps when you send an email to info@mrmastic.co.uk, and we’ll give you a clear price for bathroom resealing in Hoswick. If you have two layers of silicone, both failing and damp behind the bath or under the tray, we can put it right, on basins & vanity units, sinks & splashbacks and wet rooms alike.

Being further from a city does not change the work: old material out, joints cleaned and dried, and a fresh, even finish. We just plan the journey and access beforehand.

Each job carries a 12-month guarantee.

Mr Mastic applicator sealing the vertical joint between a glass shower screen and tiled wall
Location
Hoswick (ZE2)
Region
Shetland Islands
Guarantee
12 months on all our work
Quote
A clear quote up front
Email
info@mrmastic.co.uk
Updated
26 October 2026

How the job changes by surface

Wet rooms

In a wet room, the joints between floor and walls take standing water. They get anti-fungal sanitary silicone, working on the surface joints, not the tanking or drainage.

Kitchen worktops & upstands

Water behind a laminate worktop can make the edge swell. A sound joint along the back edge stops that.

What bathroom resealing looks like in Hoswick

Hoswick is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Island jobs need planning around ferries and the weather, so give us as much notice as you can.

Around Hoswick, as everywhere, bathroom resealing is only as good as the preparation behind it.

Hoswick is about 11 miles south of Lerwick, in the Shetland Islands. We carry out bathroom resealing for homes and businesses in Hoswick. We cover 63 towns and villages across the Shetland Islands.

Work in ZE2 works the same way as everywhere else we cover. You will find streets such as Greenfield Road and Brakefield Road. Neighbouring places we cover for bathroom resealing include Sandwick (1 mile east), Levenwick (2 miles south), Bigton (3 miles south-west), Mail (3 miles north) and Bremirehoull (3 miles north). Within a short drive, we also cover Lerwick (11 miles north), Sound (11 miles north) and Scalloway (10 miles north). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.

Local landmarks in Hoswick

Open spaces near Hoswick include Loch of Vatsetter.

Map of Hoswick © OpenStreetMap contributors

What affects the quote in Hoswick

The quote reflects the job in front of us. We take into account:

  • The number of rooms or windows
  • Any working-time requirements on site
  • Which sealant suits the joint
  • How easy the joints are to reach

What it costs depends on the size of the job, how much old material has to come out and access to the work. You will have a clear quote before any work starts.

Helping us quote

Before you ask for a quote, have a think about:

  • What’s wrong with the joints now
  • The rough size of the job
  • Whether it has been sealed before
  • Whether it’s a home or a business

Getting a quote is simple: tell us what needs doing and where. A few pictures by email make the job easier to understand.

Why it’s worth doing now in Hoswick

A failed joint gets more costly to put right the longer it’s left. Water that gets behind a bath soaks into the floor, the panel and sometimes the ceiling below, and that is a far bigger job than a reseal. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.

Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. You’ll know the price before we begin.

Why us?

  • Homes, businesses and hotels
  • Colour picked to suit the job
  • Old sealant always removed completely
  • We leave the area clean and tidy

Read what affects the cost or our reviews.

The process

The work is kept neat and contained to the joints we’re treating. The job normally takes half a day or less for one room, longer when the kitchen is included, and we explain the cure time before we leave. In smaller Scottish places, parking is usually less of an issue than access and distance. Tell us how to find the property and how to reach the work, and the visit is planned around that.

  1. We protect the area and cut out all of the old sealant.
  2. The joint is cleaned, degreased and treated for mould.
  3. We let it dry fully and fill the bath with water before sealing.
  4. A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
  5. We tidy up and give you the cure time, generally around 24 hours.

Getting ready for the visit

  • Where the joints are inside, avoid wetting them before we arrive
  • Clear the area around the work
  • Mention any leaks or damp you’ve noticed

Ask for a quote

For bathroom resealing in Hoswick, email us at info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.

Ask for a quote

Advice

When something else is needed

Sealant is not the answer to every problem, and we’d rather say so up front. Sealant won’t put right:

  • A tray or bath that is cracked through
  • Movement from a bath with loose feet or no proper support
  • Cracked or missing grout between tiles (that is regrouting)

If you are not sure, just send an email to info@mrmastic.co.uk and we’ll give you a straight answer.

Joints and surfaces we work on

  • Wet rooms
  • Basins & vanity units
  • Baths
  • Shower trays & enclosures
  • Sinks & splashbacks
  • Kitchen worktops & upstands

Signs you need bathroom resealing in Hoswick

Baths and trays move. An acrylic bath flexes under load, while a poorly supported tray can shift underfoot. That movement works at the bead until it splits or peels away.

Common reasons people contact us include:

  • Damp behind the bath or under the tray
  • A messy, uneven bead from a previous reseal
  • Gaps between the worktop and the wall
  • Water escaping at the shower enclosure

Whether the job is in Hoswick itself or nearby, the right material for each joint matters as much as a neat finish.

Comparing quotes

  • Are they insured?
  • When the joint can take water or movement
  • What preparation is included
  • Is the old sealant removed completely?

How to choose a mastic man

Your questions about bathroom resealing in Hoswick

Do you cover smaller places like Hoswick?

Yes, we do. We work across all of Scotland, islands included, and smaller places are part of that. Longer journeys are simply planned in advance.

What guarantee comes with bathroom resealing in Hoswick?

Every job comes with our one-year guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.

Are you insured?

Yes. We are fully insured.

Where are you based?

We work from Crawley. Our applicators cover Hoswick.

Can landlords and businesses book you?

Yes. As well as householders, we work for landlords, agents, businesses and hotels across the Shetland Islands.

What should I tell you?

A short description and the location, plus photos if you have them. If we need more, we will ask.

Do you do commercial work?

Yes. We work in offices, washrooms, hotels and other commercial premises. Working times can be discussed when we quote.

Do the sealants smell?

Some sealants have a smell while they cure. Ventilation helps.

Can I do it myself?

Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.

If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job