Hampshire · England
Holybourne Bathroom Resealing
Bathroom resealing across Holybourne and nearby, with every bit of old sealant taken out first and a 12-month guarantee.
- Water getting behind the kitchen upstand
- Black spots spreading through the bead
- Smears of silicone across the tiles
Surface by surface
Baths
A bath shifts slightly every time it’s filled, so we fill it with water before sealing. The joint is then laid with the bath at its lowest point and is not torn the first time it’s used.
Sinks & splashbacks
Where a splashback meets the worktop, there’s a joint that catches every splash. We renew it in clear, white or a matched colour.
About our bathroom resealing in Holybourne
Sealant that is mouldy, cracked or peeling shouldn’t be left until there’s a leak. A photo of the joints helps when you phone 0345 464 0079 or send us an email, and we will give you a clear quote for bathroom resealing in Holybourne. If you’re dealing with smears of silicone across the tiles and gaps between the worktop and the wall, we can help, on kitchen worktops & upstands, wet rooms and shower trays & enclosures alike.
Somewhere as small as Holybourne, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
You are covered for a year from the day we finish. If there’s a problem with it, please phone 0345 464 0079 or drop us an email.
- Location
- Holybourne (GU34)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
What happens if it’s left?
You do not need a new bathroom because the sealant looks bad. A new bead often brings the whole room back. If we find a deeper problem, you will hear it from us. In a small place like Holybourne, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
What you pay reflects the work, not guesswork. That’s why we ask about the job first and agree the price before starting.
Why choose Mr Mastic in Holybourne
- Colour picked to suit the job
- 4.9 on Google from 180+ five-star reviews
- Colour agreed with you before any work starts
- Every job guaranteed for a year
Read what affects the cost and customer reviews.
Can I do it myself?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
What affects the quote in Holybourne
We do not publish a price list, because jobs vary so much. What we look at:
- How much there is to do
- Any mould that needs treating
- The old material and how stubborn it is
- How easy the joints are to reach
No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part, and we’ll explain the quote if you ask.
What we need to know
There’s no need for technical detail. It helps if you can tell us:
- How many joints, rooms or windows are involved
- The problem you’ve noticed
- Any access issues, like height or stairs
- The type of property
Call for a quick quote, or email us if that is easier. Tell us about the joints that need doing and we’ll explain what’s involved before giving you a price.
Holybourne homes and their sealant
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in. There are hotels and other places to stay in and around Holybourne. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room.
For site and facilities teams at buildings such as Andrews' Endowed Church of England Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. If you let a flat or house near Alton station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Holybourne is about 2 miles north-east of Alton, in Hampshire. Whether you are in the middle of Holybourne or further out, we cover bathroom resealing for every kind of property. Holybourne is one of 683 places in Hampshire where we work. Reading is on our list too, around 20 miles away.
Work in GU34 is quoted and booked the same way as anywhere else. Whether your property is on London Road, Carpenters Close and Inhams Road or anywhere close by, our applicators can take on the job. Other places close to Holybourne include Neatham (1 mile south-east), Alton (2 miles south-west), Upper Froyle (2 miles north-east), Wyck (2 miles south-east) and East Worldham (2 miles south). Within a short drive, we also cover Basingstoke (10 miles north-west), Farnborough (12 miles north-east), Fleet (9 miles north-east), Aldershot (10 miles north-east), Petersfield (11 miles south) and Yateley (13 miles north).
Landmarks near Holybourne
We work in homes and buildings around White Hart pub, Eggar's School and Treloar School. For rail, the closest station is Alton station, roughly 1.2 miles south-west. A little further out are Alton Community Hospital (2.4 miles south-west) and Allen Gallery (1.5 miles south-west). Green spaces nearby include Holybourne Hill.
Your questions about bathroom resealing in Holybourne
Do you work for landlords with property near Alton station?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before work begins.
Do you cover smaller places like Holybourne?
Yes. Holybourne is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
What information do you need?
A short description and the location, plus photos if you have them. If we need more, we’ll ask.
Do you remove the old sealant?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
Can you just seal over the old silicone?
No, and it’s one of the main reasons reseals fail. The old joint is stripped, cleaned and resealed from scratch.
Is the work guaranteed?
Yes. Every job carries our one-year guarantee.
Can I choose the colour of the sealant?
White and clear are the most common choices, but other colours can be used to suit tiles and worktops. Tell us what you’d like when you get in touch.
What sealant do you use?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we’ll explain our choice.
Also near Holybourne
More services for Holybourne
When to call us in Holybourne
Black mould is behind a lot of resealing. Steamy rooms that do not dry out keep the silicone damp for hours, and once it has grown into the bead, cleaning rarely gets it out.
Look out for any of the following:
- Water getting behind the bath panel
- A bead that has pulled away from the tiles
- Lumpy, uneven sealant from a DIY attempt
- Shrunken sealant along the back of a worktop
For an older house near a landmark such as Holy Rood Church, walls and floors in older homes can move, and sealant and grout show it first.
Comparing quotes
- What preparation is included
- When the joint can take water or movement
- How much experience the applicator has
- Whether they seal over old material or remove it
How it works
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. For most jobs that takes around two hours for one bath or shower, longer for a whole bathroom and we leave things clean and tidy. Somewhere as small as Holybourne, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We cover the area around the joints we’re working on.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Getting ready for the visit
- Let us know if you’ve seen damp or leaks
- Clear the area around the work
- Mention any tricky access
Get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that’s easy.
Related advice
How to look after the new joints
Looking after new joints is easy:
- Give the silicone its full cure time
- Wipe the sealant dry after showering
- Open a window or run the fan so the room dries
- Use gentle cleaners on the silicone
Clean the silicone with care: a mild bathroom cleaner and a soft cloth is enough. Avoid scouring pads and anything sharp, and a nicked bead lets mould in sooner.
Mould that starts as a few spots spreads through the bead. When it has grown right through, it rarely cleans out, and nearby grout often goes the same way. Replacing the sealant early keeps the job small.