Isle of Wight · England
Havenstreet Bathroom Resealing
Problem with your baths, showers and worktops in Havenstreet? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Black spots spreading through the bead
- Splits where the tray meets the wall
- New sealant laid over old sealant that is now lifting
About our bathroom resealing in Havenstreet
Kitchens need the same care as bathrooms. The joint between worktop and wall, the edge of the sink and the bottom of the splashback all take splashes every day, and water that gets into the back edge of a worktop can swell the board. We reseal them with a kitchen-suitable silicone, matched to the worktop where it’s on show. We work on wet rooms, kitchen worktops & upstands and basins & vanity units, and common reasons people get in touch are cracked, shrunken or lifting silicone and damp behind the bath or under the tray.
Somewhere as small as Havenstreet, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
Every job is covered by our 12-month guarantee.
- Location
- Havenstreet (PO33)
- Wider area
- Isle of Wight
- Cover
- A year, on every job
- Quotes
- A clear price before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Bathroom resealing in Havenstreet: local notes
Havenstreet is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Homes close to St. Peter's Church include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them. If you let a flat or house near Smallbrook Junction station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Havenstreet is about 2 miles south-west of Ryde, in the Isle of Wight. Whether you are in the middle of Havenstreet or further out, we cover bathroom resealing for every kind of property, from flats and houses to offices and hotels. Our area takes in 125 places across the Isle of Wight, from the larger towns to small villages. Our Portsmouth page covers work nearby (9 miles or so).
Here we cover the PO33 postcode area for bathroom resealing. If you need bathroom resealing at a property on Church Road, Elizabeth Gardens and Church Lane or a nearby road, we can help. We also cover the places around Havenstreet: Fishbourne (1 mile north), Wootton (2 miles north-west), Hillgrove (2 miles west), Staplers (3 miles west) and Fairlee (3 miles west). We also work in nearby towns such as Newport (4 miles west), Cowes (6 miles north-west), Sandown (4 miles south-east), Shanklin (6 miles south), Ventnor (8 miles south) and East Cowes (5 miles north-west). For island and remote addresses, the job takes a little more planning, so let us know when you get in touch.
Local landmarks in Havenstreet
Typical jobs here are in homes near White Hart Inn, among other places. For rail, the closest station is Smallbrook Junction station, about 2.2 miles east of the centre. Nearby you will also find The Donald Mcgill Museum (2.4 miles north-east) and Sandown Castle (4.4 miles south-east). For a walk, there’s Briddlesford Nature Reserve and Brading Down.
What happens on the day
We bring everything the job needs with us. After a quick look at the joints together, the area is protected and the work begins. It normally takes a couple of hours for a single bath or shower. In a small place like Havenstreet, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First, each joint is checked for movement and signs of water.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- We tool the bead to a neat finish and give you the cure time, usually around 24 hours.
Getting ready for the visit
- Tell us about any water getting in
- Plan for the work area to be out of bounds to pets and children
- Move anything stored near the joints
How to get a quote
Call for a quick quote, or email us if that is easier. Tell us about the joints that need doing and we will explain what’s involved before giving you a price.
Related advice
DIY versus a professional finish
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
What we are called out for in Havenstreet
Sealant laid on a damp, dusty or greasy joint never bonds properly. Soap residue, oils and leftover silicone film all get in the way, and a joint that looked fine soon begins to come away.
It’s worth asking for a quote if you see:
- Damp behind the bath or under the tray
- Two layers of silicone, both failing
- A messy, uneven bead from a previous reseal
- Cracked, shrunken or lifting silicone
Schools such as Ryde Academy are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
What to look for in a quote
- How the joint is cleaned and prepared
- Whether VAT is included
- The length of the guarantee
- When the joint can take water or movement
Questions from Havenstreet
Can you do bathroom resealing in Havenstreet?
Yes, Havenstreet is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or email us and let us know what needs doing, and we will send you a clear quote.
Is Havenstreet within the area you cover?
Yes. Havenstreet is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you do commercial work?
Yes. Hotels, offices and other businesses use us.
Are you an approved applicator?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
What should I tell you?
Let us know what needs doing and where, plus pictures if you have them. If we need more, we’ll ask.
Where is Mr Mastic based?
Our base is Crawley. We work across South East England, London and Scotland.
Can new silicone go straight over the old?
No, and it’s one of the main reasons reseals fail. The old joint is stripped, cleaned and resealed from scratch.
Do you guarantee your resealing?
Yes, for 12 months. Good ventilation and gentle cleaning help it last.
Also near Havenstreet
More services for Havenstreet
When something else is needed
To be straight with you, some problems need a different trade:
- Cracked or missing grout between tiles (that is regrouting)
- A tray that rocks until it’s re-bedded
- Leaks from a shower valve, waste or pipework (a plumber’s job)
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we’ll tell you honestly.
What we seal
- Baths
- Wet rooms
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & upstands
- Sinks & splashbacks
What happens if it’s left?
Bleach and mould sprays may lighten black marks for a while, but mould that has grown into the sealant tends to return. The lasting answer is to remove the bead and start again. Where a wall is exposed, as many are in small places like Havenstreet, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference.
What you get with us
- Domestic, commercial and hotel work
- Trusted Arbo and Everbuild sealants
- Old sealant always removed completely
- Sanitary silicone with an anti-fungal additive in wet areas
What affects the quote in Havenstreet
Call for a quick quote. The main things that affect it are:
- Working hours on commercial sites
- The type of sealant required
- How many rooms, windows or areas are involved
- Mould in or behind the old joints
Doing several joints on one visit is normally more efficient than separate visits, so tell us about everything that needs sealing. We’ll send you a clear quote for the lot.
Asking for a quote
Before you ask for a quote, have a think about:
- Whether it has been sealed before
- Photos by email, if that is easy
- How we’d reach the joints
- What’s wrong with the joints now
For a quote, call 0345 464 0079 or email us and tell us where the job is and what the problem looks like. We will send you a clear quote before any work starts.
What the job involves on each surface
Baths
Baths move more than any other fitting, so it’s filled with water before the bead goes on. The joint is then laid with the bath at its lowest point and is not stretched when it’s used.
Kitchen worktops & upstands
Kitchen joints need more degreasing than bathroom ones, because cooking grease stops sealant bonding. Proper degreasing is what helps the new joint last.