West Sussex · England
Bathroom Resealing in Haslingbourne
Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Haslingbourne and across West Sussex. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Mouldy sealant that has gone black
- Leaks into the floor or ceiling below
- Cracked, shrunken or lifting silicone
What happens on the day
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The job generally takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen from start to finish. In a small place like Haslingbourne, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- The joint is cleaned, degreased and treated for mould.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- We tool the bead to a neat finish and give you the cure time, generally around 24 hours.
Getting ready for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Mention any leaks or damp you’ve noticed
- Mention if the joints have been sealed before
How to get a quote
Need a quote? Please call 0345 464 0079 or email us with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Read more
About our bathroom resealing in Haslingbourne
With over 20 years in the trade, we reseal baths, showers and kitchens in homes across Haslingbourne. We are fully insured ARBOMaster approved applicators, and the work comes with a 12-month guarantee. We work on sinks & splashbacks, shower trays & enclosures and wet rooms, and the jobs we see most are smears of silicone across the tiles and leaks into the floor or ceiling below.
Being in a small place like Haslingbourne makes no difference to the job itself: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
Every job comes with our one-year guarantee.
- Where
- Haslingbourne (GU28)
- Wider area
- West Sussex
- Cover
- 12 months on all our work
- Price
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Landlords, agents and businesses in Haslingbourne
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
For anyone letting property in or around Haslingbourne, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs, and photos by email help.
Aftercare tips
To keep the joints looking good and working properly:
- Wipe the sealant dry after showering
- Do not leave water standing on kitchen joints
- Do not let bottles sit on the bead
- Look for lifting corners and small gaps now and then
Do not stand bottles along the bead, as they hold water against it. Squeegeeing the walls and tray after use keeps water from sitting on the joint.
Watch for the early signs: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. Any of these means the joint needs attention.
Honest limits
Sealant is not the answer to every problem, and we will tell you before any work starts. Sealant won’t put right:
- Cracked or missing grout between tiles (that’s regrouting)
- Movement from a bath with loose feet or no proper support
- Tiles that have come away from the wall
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we will tell you honestly before booking.
Joints and surfaces we work on
- Basins & vanity units
- Baths
- Kitchen worktops & upstands
- Sinks & splashbacks
- Shower trays & enclosures
- Wet rooms
What bathroom resealing looks like in Haslingbourne
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
If you let a flat or house near Pulborough station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. In the older streets around Church of St Bartholomew, walls and floors in older homes can move, and sealant and grout show it first.
Haslingbourne is about 12 miles north of Littlehampton, in West Sussex. Whether you’re in the middle of Haslingbourne or further out, we cover bathroom resealing for every kind of property, from flats and houses to offices and hotels. Our West Sussex coverage runs to 371 places, Haslingbourne among them. You can also see our page for Crawley, about 20 miles away.
We cover every part of the GU28 postcode area for bathroom resealing. We also cover Petworth (1 mile north-west), Rotherbridge (1 mile west), Hampers Green (2 miles north), Tillington (2 miles north-west) and Upperton (2 miles north-west). Further out, we also cover Horsham (14 miles north-east), Worthing (14 miles south-east), Bognor Regis (13 miles south), Chichester (12 miles south-west), Littlehampton (12 miles south) and Rustington (12 miles south).
What’s near Haslingbourne
Typical jobs here are in homes near The Black Horse Public House and the streets around them. The nearest railway station is Pulborough station, about 3.8 miles east of the centre. Nearby you’ll also find Coultershaw Heritage Site (0.9 miles south-west) and Coates Castle (1.8 miles south). Not far away are The Mens and Bignor Hill.
DIY versus a professional finish
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Places near Haslingbourne
Other services in Haslingbourne
Different surfaces, different methods
Baths
Baths move more than any other fitting, so we fill it with water before sealing. The joint is then laid with the bath at its lowest point.
Basins & vanity units
On a basin, neatness shows: so we keep the line tidy and even, finished in a colour that suits the basin.
When to call us in Haslingbourne
Not every tube in the shop is meant for a shower. Acrylic caulk and general-purpose sealants aren’t designed for a joint that is wet every day, so they stain, crack or go mouldy before long. Wet areas call for a sanitary silicone with an anti-fungal additive.
It’s worth asking for a quote if you see:
- Lumpy, uneven sealant from a DIY attempt
- Water getting behind the bath panel
- Black mould in the silicone that will not clean off
- Gaps where the bath or tray has moved
For site and facilities teams at buildings such as Petworth Cof E Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
What to look for in a quote
- The length of the guarantee
- Whether they’re fully insured
- Is VAT in the price?
- What happens if the job turns out different
Haslingbourne: your questions answered
Can you help a landlord with a rental near Pulborough station?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before we start.
Can you do bathroom resealing in Haslingbourne?
Yes, Haslingbourne is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or email us and let us know what needs doing.
How long does a bath or shower reseal take?
It takes half a day or less for one room, longer when the kitchen is included. You’ll know how long to expect before work begins.
What colours of sealant can you use?
White and clear are the most common choices, and other colours are available to suit tiles, trays and worktops. Let us know your preference when you ask for a quote.
Are you fully insured?
Yes, we’re fully insured for every job we do.
Can new silicone go straight over the old?
No. It’s a common reason for reseals failing. The old joint is stripped, cleaned and resealed from scratch.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Will the old sealant be removed?
Yes, every time. New sealant won’t bond properly to old, so the joint is cleaned back first.