Hampshire · England
Bathroom & kitchen resealing in Hale, Hampshire
Bathroom resealing for Hale and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.
- A joint torn by a bath that flexes
- Mouldy sealant that has gone black
- Water getting behind the bath panel
Bathroom resealing for homes and businesses in Hale
Sealant is the soft line between a bath, shower or worktop and the wall. When it splits, shrinks or turns black, water gets behind it and into the wall or floor. Every trace of the old sealant is taken out and replaced with anti-fungal sanitary silicone. Typical jobs include a bead that has pulled away from the tiles and a messy, uneven bead from a previous reseal, across basins & vanity units, wet rooms and kitchen worktops & upstands.
Being in a small place like Hale makes no difference to the job itself: the journey and access are simply agreed in advance. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
You get a 12-month guarantee, the same in Hale as everywhere else we work.
- Where
- Hale (SP6)
- Wider area
- Hampshire
- Guarantee
- A year, on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Common questions in Hale
Do you cover smaller places like Hale?
Yes, Hale is covered. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
What guarantee comes with bathroom resealing in Hale?
Every job comes with our one-year guarantee, wherever it is. We are fully insured, and an ARBOMaster approved applicator.
Are you fully insured?
Yes. We are fully insured, with over 20 years’ experience in sealant work.
Is white the only colour available?
We can use white, clear or a colour to suit. Where the joint is on show, we match it to the surface.
Are you ARBOMaster approved?
Yes. Mr Mastic is an ARBOMaster approved applicator, and we’re fully insured.
Can you do several jobs on one visit?
Of course. Doing several areas at once is usually more efficient, so mention them when you ask for a quote.
How long does it take to reseal a bath or shower?
It takes a morning or an afternoon for most single baths and showers. We will confirm how long your job needs when we quote.
Where do you work from?
Our base is Crawley. We work across South East England, London and Scotland.
Looking after it afterwards
No joint lasts for ever, but care makes a real difference. Our tips:
- Run the extractor fan during and after every shower
- Squeegee the walls and tray after use
- Avoid abrasive pads on the sealant
- Keep bottles off the sealant line
Have a look at the joints every few months. A small split or a corner lifting is easy to spot, and if anything looks wrong, just call 0345 464 0079 or email us.
A few black dots in the silicone soon become a black line. When it has grown right through, it rarely cleans out. Catching it early keeps it a simple reseal.
What we can’t put right
Some problems need a builder, plumber or other trade rather than us:
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Cracks in the tray itself rather than the joint
- Tiles that have come away from the wall
Not sure which it is? You can call 0345 464 0079 or send us an email and we will tell you honestly.
What we seal
- Basins & vanity units
- Shower trays & enclosures
- Kitchen worktops & upstands
- Baths
- Wet rooms
- Sinks & splashbacks
What bathroom resealing looks like in Hale
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around Church of St Mary, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. If you look after a building such as Hale Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Hale is in Hampshire. Anywhere in SP6, we cover bathroom resealing for homes and businesses. Our area takes in 683 places across Hampshire, large and small. Southampton is on our list too, about 15 miles from Hale.
All of SP6 is within our area for bathroom resealing. That includes homes and businesses on Hatchet Green and Queen Street. We also cover the places around Hale: Hatchet Green (1 mile north-east) and North Charford (1 mile north-east). Within a short drive, we also cover Totton (10 miles east), Chandler's Ford (15 miles east), Romsey (11 miles east), New Milton (15 miles south), Ringwood (9 miles south) and Marchwood (13 miles south-east).
Landmarks near Hale
Locally, jobs take us to homes and businesses close to Woodfalls Inn and The Trafalgar School at Downton. Other landmarks nearby include Salisbury District Hospital (5.8 miles north-west) and Downton Moot Close (1.6 miles north-west).
DIY versus a professional finish
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
What affects the cost of bathroom resealing
You’ll get a clear quote before we start. It’s based on:
- Which sealant suits the joint
- The number and length of the joints
- How many areas need sealing
- The old material and how stubborn it is
What you pay reflects the work, not guesswork. That’s why we ask a few questions first.
What we need to know
When you call or email, it’s useful to know:
- How we’d reach the joints
- The problem you’ve noticed
- The address or postcode of the job
- The rough size of the job
Need a quote? Please ring 0345 464 0079 or send us an email with a few details. You will know what we plan to do, and what it will cost, before any work begins.
What we do, step by step
We keep the work tidy and contained to the area we are working on, so you can carry on as normal. Expect the work to take around two hours for one bath or shower, longer for a whole bathroom, and we tell you how long to leave it before we go. In a small place like Hale, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We cover the area around the joints we’re working on.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
How to prepare
- Clear items away from the joints we are working on
- Mention any leaks or damp you’ve noticed
- Let us know about earlier repairs to the joints
Ask for a quote
To get a quote, phone 0345 464 0079 or drop us an email with the location and a short description of the problem. You will have a clear quote before any work starts.
Related advice
For landlords and businesses
Housing providers, facilities teams and property managers book us too in Hale and across Hampshire. Several sites can go on one quote, and we’re fully insured.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Surface by surface
Baths
Most bath leaks begin along the long edge, especially under a shower. We finish it with a single, even bead of anti-fungal silicone.
Wet rooms
In a wet room, the joints between floor and walls take standing water. They get anti-fungal sanitary silicone, and our work is on the visible joints only.