West Sussex · England
Bathroom & kitchen resealing in Fisher, West Sussex
Bath, shower, basin, wet room, worktop and sink resealing for Fisher, backed by a one-year guarantee. Call for a quick quote.
- Gaps between the worktop and the wall
- Splits where the tray meets the wall
- Lumpy, uneven sealant from a DIY attempt
Bathroom resealing in Fisher, done properly
Showers work their sealant harder than baths. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. They’re resealed with anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. We are often asked to deal with mouldy sealant that has gone black and failed sealant on the screen profile, on wet rooms, kitchen worktops & upstands and basins & vanity units.
Homes around Fisher are mostly houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
You get a 12-month guarantee, the same in Fisher as everywhere else we work.
- Place
- Fisher (PO20)
- Region
- West Sussex
- Cover
- 12 months on all our work
- Quote
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
The process
There is not much for you to do on the day. Show us the job and we’ll take it from there. The work itself takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen from start to finish. Somewhere as small as Fisher, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
Getting ready for the visit
- Clear the area around the work
- Tell us about any previous sealing or DIY attempts
- Tell us about access, such as stairs, a lift or high-level joints
Getting a quote
Call for a quick quote, or email us if that is easier. Describe what needs sealing and we will explain what’s involved.
Advice
Common questions in Fisher
Is Fisher in your area for bathroom resealing?
Yes, Fisher is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or send us an email and let us know what needs doing, and we will give you a clear price.
Do you work for landlords with property near Chichester station?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or drop us an email and tell us about the property, and we’ll give you a clear quote.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.
Do you do kitchens as well as bathrooms?
Yes, often alongside a bathroom. Next to the sink we use a food-safe product where it’s needed.
Is there any odour?
Some sealants have a smell while they cure. Opening a window helps.
Do you work for hotels and businesses?
Yes. Hotels, offices and other businesses use us, and we are fully insured.
Can you just seal over the old silicone?
No, never. Sealing over the top looks fine for a few weeks, then lifts, because silicone does not bond to silicone. Every trace of the old bead is removed first.
Where are you based?
Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.
For landlords and businesses
If you manage several properties in or around Fisher, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs, and photos by email help.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Can I do it myself?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
What affects the quote in Fisher
Some jobs are bigger than they look, and some smaller. What affects the quote:
- Working hours on commercial sites
- Whether old sealant or filler has to be cut out
- The size of the job
- Whether the work is at height
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference, and we will explain the quote if you ask.
What to tell us for a quote
Photos by email are helpful but not essential. Try to tell us:
- Pictures of the joints, sent by email
- Where the job is, and your postcode
- Access, such as stairs, a lift or height
- Whether it has been sealed before
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. Whenever you are ready, call 0345 464 0079 or drop us an email.
What bathroom resealing looks like in Fisher
Fisher is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For site and facilities teams at buildings such as Chichester High School For Girls, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. If you live in an older home near St Leodegar's Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Fisher is about 3 miles south of Chichester, in West Sussex. Every kind of property in Fisher can book us for bathroom resealing, old or new, large or small. Every job comes with our one-year guarantee. Our West Sussex coverage runs to 371 places, Fisher among them. Portsmouth is on our list too, about 14 miles from Fisher.
We work across the PO20 postcode area for bathroom resealing. We also cover South Mundham (1 mile east), Street End (1 mile south-west), Sidlesham Common (1 mile west), Sidlesham (2 miles south-west) and Nyetimber (2 miles south-east). Further out, we also cover Bognor Regis (3 miles east), Chichester (3 miles north), Selsey (5 miles south), Littlehampton (10 miles east), Emsworth (9 miles north-west) and Rustington (11 miles east).
Landmarks near Fisher
The nearest railway station is Chichester station, about 2.5 miles north of the centre. Nearby you’ll also find Chichester Cathedral Treasury (2.7 miles north) and Chichester Castle (3 miles north).
How to look after the new joints
Looking after new joints is easy, and it makes a real difference:
- Keep an eye on the corners, where splits start
- Don’t let bottles sit on the bead
- Wipe the sealant dry after showering
- Run the extractor fan during and after every shower
Clean the silicone with care: a mild bathroom cleaner and a soft cloth is enough. Scourers and blades can nick the surface, and a nicked bead lets mould in sooner.
Don’t wait for a refit to deal with failed sealant. Sealant is a maintenance item, like the paint on a window frame, and replacing it when it fails protects the rest of the room.
What else we do in Fisher
Common problems we fix in Fisher
Mould is the reason many people want their sealant replaced. Steamy rooms that do not dry out give mould all the damp it needs, and mould that has grown into the silicone usually will not clean off.
Most people get in touch after spotting one of these:
- Cracked, shrunken or lifting silicone
- Two layers of silicone, both failing
- Failed sealant on the screen profile
- A joint torn by a bath that flexes
If you let a flat or house near Chichester station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Comparing quotes
- How long to leave it before use
- Whether VAT is included
- What happens if they find a problem under the old sealant
- How the colour is chosen
What the job involves on each surface
Shower trays & enclosures
Water often gets past the wall profile of a shower enclosure. We reseal it along with the base of the enclosure, sealing the side the enclosure’s instructions call for.
Baths
A bath shifts slightly every time it’s filled, so we fill it with water before sealing. That way the joint is laid with the bath at its heaviest and isn’t stretched when it’s used.