Wokingham · England

Bathroom Resealing in Crowthorne

Problem with your baths, showers and worktops in Crowthorne? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.

  • Black mould in the silicone that will not clean off
  • Smears of silicone across the tiles
  • Water getting behind the bath panel

Bathroom resealing for Crowthorne homes and businesses

Looking after it afterwards

Once the sealant has cured, a few habits help it last:

  • Give the silicone its full cure time
  • Keep bottles off the sealant line
  • Look for lifting corners and small gaps now and then
  • Dry the bead with a towel now and then

In a kitchen, don’t let water sit along the back of the worktop. A dry joint lasts longer.

Each shower pushes a little more water through a failed joint. Over time that water reaches floors, walls and ceilings. Resealing early stops it.

About our bathroom resealing in Crowthorne

Across Crowthorne, the joints we reseal are the ones that fail in any home: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Each one is stripped, cleaned and dried before new silicone goes in. Typical jobs include a reseal done over the top of the old bead and gaps between the worktop and the wall, across sinks & splashbacks, wet rooms and baths.

Crowthorne mixes older houses with estates built more recently, so bathrooms range from long-standing suites to recent refits. Either way, the sealant and grout are usually the first things to fail.

You’re covered for a year from the day we finish. If anything isn’t right with it, ring 0345 464 0079 or drop us an email.

Place
Crowthorne (RG45, RG40)
Wider area
Wokingham
Cover
12 months on all our work
Quote
A clear quote up front
Telephone
0345 464 0079
Page updated
26 October 2026
Sealant gun being used along the bath-to-tile joint in a beige tiled bathroom

DIY sealant or a professional job?

Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.

If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.

Leave it or put it right?

Dealing with sealant early is a short job: the work takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Wait for a leak and you may be looking at panels off, drying out and redecorating too. Gaps in sealant and mould in the bead never get better on their own, and in a busy household in Crowthorne they spread with every shower and every downpour. Now is the easy time to put it right.

Combining jobs into one visit is normally more efficient than separate visits, so it’s worth mentioning everything you’d like done. You will get one clear quote for the whole job.

What you get with us

  • ARBOMaster approved applicator
  • A 12-month guarantee on all work
  • We are fully insured
  • We never seal over old sealant

Take a look at how sealant jobs are priced and customer reviews.

What the job involves on each surface

Sinks & splashbacks

Where a splashback meets the worktop, there’s a joint that catches every splash. We renew it in clear, white or a matched colour.

Basins & vanity units

Vanity units have long, worktop-style joints against the wall. If water gets in, the cabinet underneath can swell, so a neat, continuous bead matters.

Crowthorne homes and their sealant

Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.

For an older house near a landmark such as Crowthorne Methodist Church, older homes can move a little, which is hard on rigid grout and tired sealant. Managing a site like Crowthorne Church of England Primary School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For landlords with property near Crowthorne station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.

Crowthorne is about 3 miles south-west of Bracknell, in Wokingham. We carry out bathroom resealing for homes and businesses in Crowthorne and nearby. Across Wokingham, we cover 35 places, and Crowthorne is one of them. Our Reading page covers work nearby (9 miles or so).

Postcode districts we cover here for bathroom resealing: RG45 and RG40. You will find streets such as Church Road East, Church Road West and High Street, and we cover them all. Being close to the A321 and B3348, Crowthorne is easy for our applicators to reach for bathroom resealing. Close by, we work in Owlsmoor (1 mile south-east), Home Farm (1 mile north-east), Wooden Hill (2 miles north-east), Sandhurst (2 miles south) and Hanworth (2 miles north-east). Within a short drive, we also cover Reading (9 miles north-west), Wokingham (3 miles north-west), Woodley (7 miles north-west), Earley (7 miles north-west), Lower Earley (6 miles north-west) and Winnersh (5 miles north-west). Crowthorne is among the bigger towns we cover in Wokingham.

What’s near Crowthorne

Around Crowthorne, our work takes us to homes and buildings near King Edward VI Aston School, The Prince pub and Edgbarrow Woods, among other places. For rail, the closest station is Crowthorne station, roughly 1 mile south-west. Nearby you will also find The Lexicon (3.7 miles north-east) and Pinewood Hospital (0.9 miles north). The countryside around Crowthorne includes Wildmoor Heath and Heath Lake.

Map of Crowthorne © OpenStreetMap contributors

What sealant work can’t fix

It helps to know what we can’t do:

  • Leaks from a shower valve, waste or pipework (a plumber’s job)
  • A tray or bath that’s cracked through
  • A tray that rocks until it’s re-bedded

Not sure which it is? You can phone 0345 464 0079 or email us and we will tell you honestly before you book.

Where we work in Crowthorne

  • Sinks & splashbacks
  • Basins & vanity units
  • Wet rooms
  • Baths
  • Kitchen worktops & upstands
  • Shower trays & enclosures

What happens on the day

Once we are on site, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. Most jobs then take around two hours for one bath or shower, longer for a whole bathroom. For a job in Crowthorne, we need access to where the work is and somewhere nearby to park. For outside work, let us know about side access, gates and any upper-floor joints.

  1. We start by protecting the area and stripping out the old bead.
  2. The joint is cleaned, degreased and treated for mould.
  3. The joint is left to dry, and baths are filled with water first.
  4. A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
  5. Finally we tidy up and explain the cure time before we leave.

Before we arrive

  • Mention any leaks or damp you’ve noticed
  • Keep children and pets away from the work area
  • Tell us about any previous sealing or DIY attempts

How to get a quote

We quote each job on its own, so the first step is telling us about yours. Simply call 0345 464 0079 or drop us an email and describe the job, and photos are welcome.

Ask for a quote

Advice

Work for landlords, hotels and businesses

For anyone letting property in or around Crowthorne, several properties can be quoted together. Send us the addresses and the work at each, and photos by email help.

We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.

Crowthorne questions

Is bathroom resealing in Crowthorne guaranteed?

All our work, in Crowthorne and everywhere else, comes with a 12-month guarantee. We’re fully insured, and an ARBOMaster approved applicator.

Can you do bathroom resealing in Crowthorne?

Yes. We work across London and the South East, and Crowthorne is part of that. You can call 0345 464 0079 or drop us an email and tell us what needs doing, and we’ll give you a clear price.

Can you just seal over the old silicone?

No. It’s a common reason for reseals failing. We cut out all of the old sealant, clean the joint and start again.

Can I choose the colour of the sealant?

White and clear are the most common choices, and other colours are available to suit tiles, trays and worktops. Tell us what you’d like when you get in touch.

Do I need to be at home?

If the work is inside, we need someone to let us in. Once we have agreed the job, you do not need to watch us work.

What sealant do you use?

Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we will explain our choice.

Can I add another job to the visit?

Yes, and it often makes sense. Doing several areas at once is generally more efficient, so mention them when you ask for a quote.

How long before the new sealant can get wet?

Silicone is touch-dry quite quickly, but it takes longer to cure. Keep water off it for around 24 hours, or as long as we advise for that product.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job