Kent · England

Bathroom & kitchen resealing in Coxheath, Kent

Baths, showers and worktops in Coxheath need attention? We remove the old material, prepare the joints and seal them properly.

  • A bead that has pulled away from the tiles
  • Water getting behind the bath panel
  • Smears of silicone across the tiles

Trusted bathroom resealing in Coxheath

What we can’t put right

We won’t take on work that won’t last, so here’s what sealant cannot put right:

  • Damage behind the tiles that needs a tiler
  • Cracked or missing grout between tiles (that is regrouting)
  • A bath or tray that moves because it is not properly supported

If you’re not sure, just call 0345 464 0079 or drop us an email and we’ll give you a straight answer.

Where we work in Coxheath

  • Kitchen worktops & upstands
  • Shower trays & enclosures
  • Sinks & splashbacks
  • Wet rooms
  • Baths
  • Basins & vanity units

Bathroom resealing for homes and businesses in Coxheath

Sealant is the soft line between a bath, shower or worktop and the wall. When it splits, shrinks or turns black, water gets behind it into walls, panels and floors. Every trace of the old sealant is taken out and replaced with anti-fungal sanitary silicone. We work on shower trays & enclosures, wet rooms and kitchen worktops & upstands, and the jobs we see most are a reseal done over the top of the old bead and a joint torn by a bath that flexes.

In and around Coxheath, older properties sit alongside newer ones. In older homes, walls and floors can move a little more, so the right flexible sealant matters.

Big or small, it’s backed by our 12-month guarantee.

Silicone being applied where a shower enclosure meets beige wall tiles
Where
Coxheath (ME17, ME15)
Region
Kent
Guarantee
A year, on every job
Quote
A clear quote up front
Phone
0345 464 0079
Updated
26 October 2026

Why act early in Coxheath

The difference in a professional reseal is mostly what you don’t see: cutting out every trace of the old bead, cleaning, treating mould and letting the joint dry. Without that preparation, the new bead will not last. In a smaller place like Coxheath, wherever a wall is exposed, a failed outside joint is a real source of damp. Indoors, a failed seal lets water into floors and panels as it would anywhere.

Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you are unsure, call 0345 464 0079 or send us an email for an honest opinion and a quote.

Why book with us

  • Sanitary silicone with an anti-fungal additive in wet areas
  • Tidy, careful work
  • Old sealant always removed completely
  • Every job guaranteed for a year

Read how sealant jobs are priced and customer reviews.

How to look after the new joints

So the new joints stay in good condition:

  • Run the extractor fan during and after every shower
  • Do not let bottles sit on the bead
  • Dry the bead with a towel now and then
  • Stick to a soft cloth and a mild cleaner

Good ventilation does more than any cleaner. Use the fan, or open a window, while you bathe and for a while afterwards, so the silicone gets a chance to dry.

Don’t wait for a refit to deal with failed sealant. Sealant is a maintenance item, like the paint on a window frame, and replacing it when it fails protects the rest of the room.

For landlords and businesses

Letting agents and landlords in Coxheath can book us as well as householders. Resealing between tenancies keeps a property looking cared for before the next move-in.

Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can be quoted together.

Should I try it myself first?

The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.

Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.

The process

Before we leave, we go over the finished joints with you. The visit itself normally takes around two hours for one bath or shower, longer for a whole bathroom, depending on the size of the job. Parking around Coxheath is usually easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.

  1. Protection goes down around the bath, shower or worktop.
  2. We cut away the old sealant and clean off what’s left.
  3. Mould is treated, then the joint is left to dry thoroughly.
  4. Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
  5. We finish the joint, clear up and tell you how long to leave it before it gets wet.

How to prepare

  • Let us know if you’ve seen damp or leaks
  • Plan for the work area to be out of bounds to pets and children
  • Tell us about access, such as stairs, a lift or high-level joints

Getting a quote

Asking for a quote is easy: tell us what needs doing and where, and roughly how big it is. Photos by email help us understand the job, and we’ll come back to you with a quote.

Ask for a quote

Read more

Coxheath homes and their sealant

Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.

For landlords with property near East Farleigh station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. Managing a site like Coxheath Primary School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Homes close to Holy Trinity Church include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them.

Coxheath is about 3 miles south-west of Maidstone, in Kent. Coxheath gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. 922 places in Kent are on our list. Our London page covers work nearby, about 31 miles away.

Jobs for bathroom resealing in ME17 and ME15 works the same way as everywhere else we cover. Whether your property is on Westway, Stockett Lane and Orchard Close or anywhere close by, we can help. If you are just outside Coxheath, we cover Dean Street (1 mile north), East Farleigh (1 mile north-west), Farleigh Green (2 miles north-west), Kettle Corner (2 miles north-west) and Hunton (2 miles south-west). We also work in nearby towns such as Maidstone (3 miles north-east), Sittingbourne (13 miles north-east), Sevenoaks (14 miles west), Royal Tunbridge Wells (12 miles south-west), Gravesend (14 miles north) and Tonbridge (10 miles west).

Landmarks near Coxheath

Around Coxheath, our work takes us to homes and buildings near The Horse Shoes Public House, Cornwallis Academy and Quarry Wood and the streets around them. The nearest railway station is East Farleigh station, about 1.5 miles north. Well-known places in the area include The Mall Maidstone (3 miles north-east) and Oakwood Hospital (2.4 miles north).

Map of Coxheath © OpenStreetMap contributors

Different surfaces, different methods

Basins & vanity units

Basin joints are short and close to eye level: so we keep the line tidy and even, in white, clear or a colour to suit.

Kitchen worktops & upstands

Kitchen joints need more degreasing than bathroom ones, because cooking grease stops sealant bonding. Proper degreasing is what helps the new joint last.

Coxheath: your questions answered

Is Coxheath within the area you cover?

Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.

Can you help a landlord with a rental near East Farleigh station?

Yes, we work for landlords and agents. You can ring 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before work begins.

Can you work on commercial sites?

Yes, regularly. We can plan bigger jobs in stages.

Are you ARBOMaster approved?

Yes. We hold ARBOMaster approved applicator status and we are fully insured too.

Do you take out the old sealant first?

Yes, always, and completely. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.

Can you get rid of the black mould in my sealant?

Yes, we replace the mouldy bead. Cleaning products may lighten it, but the lasting fix is new anti-fungal silicone on a clean, treated joint. Airing the room well helps stop it returning.

How do I get a quote for bathroom resealing in Coxheath?

The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote.

Do you have insurance?

Yes. Full insurance covers our work.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job