Kent · England
Bathroom & kitchen resealing in Clement Street, Kent
Bath, shower, basin, wet room, worktop and sink resealing in Clement Street, with a 12-month guarantee on every job. Ask us for a quote.
- Water escaping at the shower enclosure
- Splits where the tray meets the wall
- Black spots spreading through the bead
Your questions about bathroom resealing in Clement Street
I let a flat near Farningham Road station. Can you help?
Yes, we work for letting agents and landlords. Just call 0345 464 0079 or email us and tell us about the property, and we will give you a clear quote.
Is Clement Street in your area for bathroom resealing?
Yes, Clement Street is within the area we cover. We work across London and the South East. You can phone 0345 464 0079 or email us and tell us what needs doing, and we’ll give you a clear quote.
Where are you based?
We’re based in Crawley, West Sussex, and we work across South East England, London and Scotland.
Are you fully insured?
Yes, we are fully insured for domestic and commercial work.
Is white the only colour available?
You’re not limited to white: clear, white and colours chosen to suit the room. We can help you pick when we quote.
Do you reseal kitchen worktops and sinks too?
Yes. Worktops, sinks and splashbacks are all part of the job, with a sealant suited to kitchens, colour-matched where it shows.
Can you work on commercial sites?
Yes. Commercial and hotel work is a large part of what we do, as well as homes. We can talk about working times when we quote.
Will the old sealant be removed?
Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Bathroom resealing in Clement Street, done properly
It is not only bathrooms. Worktop upstands, sink edges and splashback joints all take splashes every day, and water that gets into the back edge of a worktop can swell the board. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. Typical jobs include lumpy, uneven sealant from a DIY attempt and a joint torn by a bath that flexes, on wet rooms, shower trays & enclosures and sinks & splashbacks.
Around Clement Street, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
Our work is backed for twelve months, in Clement Street and everywhere else we cover.
- Where
- Clement Street (BR8)
- Region
- Kent
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Bathroom resealing around Clement Street
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
For an older house near a landmark such as Church of Saint Paul, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. If you let a flat or house near Farningham Road station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Clement Street is about 2 miles south of Dartford, in Kent. From the centre of Clement Street to the outskirts, we cover bathroom resealing for every kind of property. Clement Street is one of 922 places in Kent we cover for bathroom resealing. For nearby work, see our London page, about 14 miles away.
Work in BR8 works the same way as everywhere else we cover. We also cover the places around Clement Street: Hawley (1 mile north-east), Sutton at Hone (1 mile east), South Darenth (2 miles south-east), Darenth (2 miles east) and St Margarets (2 miles east). Within a short drive, we also cover Sevenoaks (9 miles south), Gravesend (7 miles east), Tonbridge (15 miles south), Northfleet (6 miles east), Kings Hill (13 miles south-east) and Swanscombe (4 miles north-east).
Landmarks near Clement Street
Typical jobs here are in homes near Dartford Heath, Wilmington Academy and The Plough pub. For rail, the closest station is Farningham Road station, roughly 1.3 miles south-east. Well-known places in the area include Eynsford Castle (3 miles south) and West Hill Hospital (2.2 miles north). Green spaces nearby include Wansunt Pit.
Landlord and commercial work in Clement Street
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
Letting agents often deal with us directly. Tell us the address, the job and how access works and we will give you a quote.
Common problems we fix in Clement Street
No sealant lasts indefinitely. Daily water, heat and cleaning products take their toll over the years, so its life depends on how the room is used, cleaned and aired.
People generally contact us when they notice one of these:
- Black spots spreading through the bead
- Leaks into the floor or ceiling below
- Failed sealant on the screen profile
- A joint torn by a bath that flexes
Managing a site like Sutton-At-Hone Church of England Primary School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
What your quote should include
- Who turns up on the day
- What insurance they hold
- What the cure time is
- What happens if the job turns out different
How the job changes by surface
Baths
Baths move more than any other fitting, so it’s filled with water before the bead goes on. That way the joint is laid with the bath at its heaviest.
Sinks & splashbacks
Around the sink, we use a product suited to kitchens, including a food-safe sealant where that’s needed. The joint is laid neatly so it’s easy to wipe.
How we quote for bathroom resealing
Some jobs are bigger than they look, and some smaller. The main factors:
- Which sealant suits the joint
- The old material and how stubborn it is
- Whether the work is at height
- Any working-time requirements on site
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote.
Asking for a quote
To help us quote quickly, let us know:
- The problem you’ve noticed
- If someone has resealed it before
- The type of property
- How we’d reach the joints
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.
Looking after it afterwards
Good habits help new joints last longer. A few tips:
- Keep bottles off the sealant line
- Wipe the sealant dry after showering
- Look for lifting corners and small gaps now and then
- Dry worktop joints after washing up
Clean the silicone with care: warm soapy water and a soft cloth do the job. Avoid scouring pads and anything sharp, because a damaged bead gives mould a foothold.
A few black dots in the silicone soon become a black line. When it has grown right through, it rarely cleans out. Replacing the sealant early keeps the job small.
Towns and villages near Clement Street
Other services in Clement Street
What happens on the day
On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The work itself takes around two hours for one bath or shower, longer for a whole bathroom from start to finish. For a village or hamlet like Clement Street, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First, each joint is checked for movement and signs of water.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, generally around 24 hours.
Preparing for the visit
- For indoor joints, keep the area dry beforehand if you can
- Let us know if you’ve seen damp or leaks
- Clear items away from the joints we’re working on
Getting a quote
There’s no standard price list. Instead, we give you a clear price for your job. To get started, call 0345 464 0079 or drop us an email.
Related advice
Can I do it myself?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.