Kent · England
Bathroom & kitchen resealing in Broadstone, Kent
Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Broadstone and across Kent. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Sealant that has split, shrunk or peeled away
- Smears of silicone across the tiles
- Leaks into the floor or ceiling below
How we handle bathroom resealing in Broadstone
We fill the bath before sealing it. The weight settles the bath to its lowest point, so the bead is not stretched the first time someone gets in. It’s a small step that rushed reseals tend to skip. If you’re dealing with splits where the tray meets the wall and new sealant laid over old sealant that is now lifting, we can put it right, whatever the surface.
In a village or hamlet like Broadstone, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
Each job carries a 12-month guarantee, large or small.
- Where
- Broadstone (ME17)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
FAQs for Broadstone
Do you cover smaller places like Broadstone?
Yes, we do. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you work for landlords with property near Lenham station?
Yes, we work for landlords and letting agents. You can ring 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before any work starts.
Can you get rid of the black mould in my sealant?
Yes, we replace the mouldy bead. Sprays can fade the marks, but cutting it out and resealing is what lasts. Good ventilation helps keep it away.
How long does the new silicone need before I use the shower?
After around 24 hours in most cases. We’ll tell you the cure time for the product we used.
Do you reseal kitchen worktops and sinks too?
Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then a colour-matched bead is laid.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Do you work for hotels and businesses?
Yes. Larger jobs can be planned room by room or area by area to suit the site.
What should I tell you?
A short description and the location, plus pictures if you have them. We’ll ask anything else we need to know.
Quotes for bathroom resealing in Broadstone
You will get a clear quote before any work starts. It takes into account:
- Working hours on commercial sites
- Whether there’s mould to deal with
- How easy the joints are to reach
- Whether old sealant or filler has to be cut out
The cost depends on the size of the job, how hard the old material is to remove and access to the work. You will have a clear quote before any work starts, so you know where you stand.
Helping us quote
To make quoting easier, please include:
- What the problem is, such as mould, gaps, leaks or cracking
- Pictures of the joints, sent by email
- The address or postcode of the job
- How many joints, rooms or windows are involved
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. Whenever you’re ready, call 0345 464 0079 or drop us an email.
Also near Broadstone
Other services in Broadstone
What bathroom resealing looks like in Broadstone
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In and around Broadstone, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint. Letting a property close to Lenham station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Broadstone is about 8 miles south-east of Maidstone, in Kent. Every kind of property in Broadstone is covered for bathroom resealing, old or new, large or small. Every job comes with our 12-month guarantee. We cover 922 towns and villages across Kent, large and small. You can also see our page for Crawley, roughly 38 miles from Broadstone.
Jobs for bathroom resealing in ME17 works the same way as everywhere else we cover. You will find streets such as Boughton Park, Headcorn Road and Eastwood Road. Nearby, we also carry out bathroom resealing in Eastwood (1 mile north-west), Grafty Green (1 mile north-east), Liverton Street (1 mile north-east), Boughton Malherbe (1 mile north-east) and Ulcombe (1 mile north-west). Larger places within reach include Maidstone (8 miles north-west), Ashford (10 miles south-east), Sittingbourne (10 miles north), Faversham (12 miles north-east), Kings Hill (12 miles north-west) and Davington (12 miles north-east).
Local landmarks in Broadstone
We work in homes and buildings around The Kings Head Public House and the streets around them. For rail, the closest station is Lenham station, about 2.9 miles north-east of the centre. A little further out are Coldbridge Castle (1.2 miles east) and The Dog Collar Museum (3.6 miles north-west).
Keeping the joints in good condition
How long the joints last depends on use and care. We suggest:
- Run the extractor fan during and after every shower
- Check the joints every few months for splits or lifting
- Keep scourers and sharp tools away from the bead
- Wipe up water along the back of the worktop
Good ventilation does more than any cleaner. Run the extractor fan during and after a shower, so the bead dries out between uses.
Do not wait for a refit to deal with failed sealant. Like paintwork, sealant needs renewing from time to time, and renewing it as soon as it fails protects everything around it.
How the visit works
When we arrive, we start by going over the job with you, so there are no surprises. Surfaces next to the work are protected before any work begins. The work usually takes two to three hours for a typical bath, depending on how much old sealant there is. Somewhere like Broadstone needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We protect the area and cut out all of the old sealant.
- Next, the joint is cleaned and any mould is treated.
- The joint is left to dry, and baths are filled with water first.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- We clear away and tell you when it can get wet, normally after around 24 hours.
Before we arrive
- For indoor joints, keep the area dry beforehand if you can
- For business premises, tell us about site rules or sign-in
- Mention any tricky access
Ask for a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved before giving you a price.
Read more
Leave it or put it right?
Tired sealant isn’t a reason to replace a bath or shower. Replacing the joint is usually all it takes, as long as the fittings themselves are sound. If we find a deeper problem, you will hear it from us. Where a wall is exposed, as many are in small places like Broadstone, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
There are no prices on our website, because each job is priced on what it involves. For a quick quote, please phone 0345 464 0079 or send us an email and we’ll talk you through it.
Why us?
- Sealant colour chosen to suit
- 4.9 on Google from 180+ five-star reviews
- Approved under the ARBOMaster scheme
- Anti-fungal sanitary silicone in wet areas
Take a look at our cost guide and what customers say.
Work for landlords, hotels and businesses
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
If you manage several properties in or around Broadstone, several properties can go on one quote. Just tell us the addresses and what each one needs.
DIY versus a professional finish
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
When something else is needed
We won’t take on work that will not last, so here’s what sealant can’t put right:
- Water getting in through the grout rather than the sealant
- Cracks in the tray itself rather than the joint
- Tiles that have come away from the wall
Not sure which it is? You can phone 0345 464 0079 or send us an email and we’ll tell you honestly.
Joints and surfaces we work on
- Sinks & splashbacks
- Basins & vanity units
- Baths
- Shower trays & enclosures
- Kitchen worktops & upstands
- Wet rooms