Surrey · England
Bathroom & kitchen resealing in Brewer Street, Surrey
Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Brewer Street and across Surrey. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Gaps where the bath or tray has moved
- Lumpy, uneven sealant from a DIY attempt
- Water getting behind the kitchen upstand
Bathroom resealing in Brewer Street
We fill the bath before sealing it. The weight settles the bath to its lowest point, so the bead is not stretched the first time someone gets in. Quick jobs often leave it out, and it makes a real difference. If you have gaps where the bath or tray has moved and a reseal done over the top of the old bead, we can put it right, whatever the surface.
In a village or hamlet like Brewer Street, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
All our work is covered by a one-year guarantee, wherever you are in Surrey.
- Location
- Brewer Street (RH1)
- Region
- Surrey
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Different surfaces, different methods
Sinks & splashbacks
Next to the sink, the sealant has to cope with constant water, including a food-safe sealant where that’s needed. The joint is laid neatly so it’s easy to wipe.
Kitchen worktops & upstands
The joint between worktop and wall takes splashes, crumbs and cleaning sprays. The new bead is colour-matched where it shows, so the line doesn’t stand out.
Signs you need bathroom resealing in Brewer Street
Plenty of failed sealant has been laid over the top of older sealant. Fresh silicone cannot grip the old bead underneath, so it peels, leaks and hides mould behind it.
Common reasons people contact us are:
- Sealant that has split, shrunk or peeled away
- Black spots spreading through the bead
- Water getting behind the bath panel
- Gaps between the worktop and the wall
For site and facilities teams at buildings such as Bletchingley Village Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Comparing quotes
- How the surfaces are prepared before sealing
- What guarantee comes with the work
- What the cure time is
- How hidden problems are handled
Work for landlords, hotels and businesses
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we will quote.
Quotes for bathroom resealing in Brewer Street
You’ll get a clear quote before work begins. It’s based on:
- The type of sealant required
- Access and height
- How many rooms, windows or areas are involved
- Whether there’s mould to deal with
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, along with when we can work on site. Call for a quick quote and we’ll go through it with you.
Asking for a quote
What to tell us when you ask for a quote:
- How many joints, rooms or windows are involved
- Access, such as stairs, a lift or height
- The address or postcode of the job
- Photos by email, if that is easy
It all starts with a short chat. Describe the problem, the location and the size of the job. Whenever you are ready, phone 0345 464 0079 or email us.
Why it’s worth doing now in Brewer Street
A clean new bead makes a room look cared for, which helps when a home is being let or put on the market. A smeared, uneven DIY bead does the opposite. In a small place like Brewer Street, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re not sure whether it needs doing, ring 0345 464 0079 or drop us an email and we will give you an honest view and a quote.
Why book with us
- Over 20 years’ experience
- You choose the colour before work begins
- We are fully insured
- A sealant colour to suit the surroundings
See our cost guide or customer reviews.
Places near Brewer Street
Also in Brewer Street
When it is not the sealant
Some problems need a builder, plumber or other trade rather than us:
- A tray or bath that’s cracked through
- Water coming from the plumbing rather than the joint
- Tiles that have come away from the wall
If in doubt, phone 0345 464 0079 or send us an email and we’ll say what we think before booking.
Joints and surfaces we work on
- Basins & vanity units
- Kitchen worktops & upstands
- Shower trays & enclosures
- Wet rooms
- Baths
- Sinks & splashbacks
Brewer Street: your questions answered
Will you come out to Brewer Street?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you help a landlord with a rental near Merstham station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or email us and tell us about the property, and we will give you a clear quote.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator and we are fully insured too.
Is it OK to put new sealant on top of the old bead?
No. Fresh silicone can’t stick to the old bead, so it peels away and hides mould and water. All the old sealant comes out first.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Do I have to be there?
That depends on where the joints are. For work indoors, someone needs to let us in.
What information do you need?
Only a few details: the address or postcode, what’s wrong and any access issues. Then call 0345 464 0079 or email us.
Can you quote for more than one area?
Yes. Tell us about everything you’d like done and we will quote it together.
Bathroom resealing around Brewer Street
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you live in an older home near Church of St Mary the Virgin, walls and floors in older homes can move, and sealant and grout show it first. For landlords with property near Merstham station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Brewer Street is about 2 miles south of Caterham, in Surrey. From the centre of Brewer Street to the outskirts, we cover bathroom resealing for every kind of property. We cover 395 towns and villages across Surrey, large and small. Crawley is on our list too, about 11 miles from Brewer Street.
We work across RH1 for bathroom resealing and the streets around it. We cover properties on Whitehill Lane and Brewer Street. We also cover Nutfield (1 mile south-west), Chaldon (2 miles north), South Merstham (2 miles west), Merstham (2 miles north-west) and South Nutfield (2 miles south-west). We also work in nearby towns such as Epsom (9 miles north-west), Horley (6 miles south-west), Redhill (3 miles west), Ewell (10 miles north-west), Reigate (4 miles west) and Dorking (10 miles west).
Local landmarks in Brewer Street
Locally, jobs take us to homes and businesses close to Merstham Park School, Oakhyrst Grange School and The Prince Albert Public House, among other places. Brewer Street’s nearest station is Merstham station, roughly 2.2 miles west. A little further out are East Surrey Museum (2.2 miles north-east) and The Belfry (3.1 miles west). Open spaces near Brewer Street include Mercers Lake and Bay Pond.
How it works
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The job generally takes around two hours for one bath or shower, longer for a whole bathroom from start to finish. Somewhere as small as Brewer Street, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First the area is protected and every bit of old sealant removed.
- The joint is cleaned, degreased and treated for mould.
- The joint is left to dry, and baths are filled with water first.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- Finally we tidy up and explain the cure time before we leave.
Getting ready for the visit
- Let us know about stairs, lifts or work at height
- Let us know about parking restrictions
- Where the joints are inside, avoid wetting them before we arrive
Getting a quote
For a quote, call 0345 464 0079 or email us with the location and a short description of the problem. We will give you a clear price before any work starts.