Hampshire · England

Bathroom Resealing in Boldre

Professional bathroom resealing in and around Boldre, with every bit of old sealant taken out first and a 12-month guarantee.

  • A bead that has pulled away from the tiles
  • A reseal done over the top of the old bead
  • Water escaping at the shower enclosure

Need bathroom resealing in Boldre?

Bathroom resealing in Boldre

A fresh bead of silicone changes how a bathroom looks more than most people expect. Black, patchy sealant makes clean tiles look tired, and a neat new joint puts that right in a short visit. Just as important, it closes the gaps water would otherwise get through. Typical jobs include a reseal done over the top of the old bead and black mould in the silicone that won’t clean off, across wet rooms, sinks & splashbacks and kitchen worktops & upstands.

In a village or hamlet like Boldre, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.

Every job is covered by our 12-month guarantee, wherever you are in Hampshire.

Fresh white silicone going into the corner where a shower screen meets the tiled wall
Where
Boldre (SO41)
Wider area
Hampshire
Cover
A year, on every job
Quotes
Quoted before any work starts
Phone
0345 464 0079
Last updated
26 October 2026

What we do, step by step

You don’t need to clear the whole room or building, just the space around the work. Everything nearby is protected, and the job takes two to three hours for a typical bath, depending on how much old sealant there is in most cases. Somewhere like Boldre needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.

  1. Protection goes down around the bath, shower or worktop.
  2. We cut away the old sealant and clean off what’s left.
  3. We treat any mould and let the joint dry properly.
  4. Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
  5. We finish the joint, clear up and tell you how long to leave it before it gets wet.

Before we arrive

  • On commercial sites, let us know about site rules
  • Tell us about any previous sealing or DIY attempts
  • Let us know about parking restrictions

How to get a quote

Need a quote? Please ring 0345 464 0079 or send us an email and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.

Ask for a quote

Advice

How the job changes by surface

Kitchen worktops & upstands

Worktop joints get wet and wiped every day. We seal them in a colour that suits the worktop, so the line doesn’t stand out.

Sinks & splashbacks

Around the sink, we use a product suited to kitchens, including a food-safe sealant where that’s needed. The bead is finished smooth so it wipes clean.

Can I do it myself?

Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.

If you’ve already had a go yourself, that’s fine. We cut it out and start again.

Landlord and commercial work in Boldre

Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.

For anyone letting property in or around Boldre, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs, and photos by email help.

When something else is needed

It helps to know what we can’t do:

  • Water getting in through the grout rather than the sealant
  • Cracks in the tray itself rather than the joint
  • Movement from a bath with loose feet or no proper support

Not sure which it is? You can call 0345 464 0079 or email us and we’ll tell you honestly before booking.

Surfaces we seal

  • Baths
  • Shower trays & enclosures
  • Basins & vanity units
  • Kitchen worktops & upstands
  • Wet rooms
  • Sinks & splashbacks

What bathroom resealing looks like in Boldre

Boldre is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.

Letting a property close to Lymington Town station? Then a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. For an older house near a landmark such as Saint Nicholas Chapel, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.

Boldre is about 2 miles north of Lymington, in Hampshire. Homes, rented property, offices and hotels in Boldre is covered for bathroom resealing, old or new, large or small. Every job comes with our one-year guarantee. Our Hampshire coverage runs to 683 places, Boldre among them. For nearby work, see our Southampton page.

Postcode districts we cover here for bathroom resealing: SO41. We cover properties on Tweed Lane, Boldre Lane and Rope Hill and the roads around them. Other places close to Boldre include Warborne (1 mile south-east), Battramsley (1 mile north-west), Pilley (1 mile east), Sandy Down (1 mile north-west) and Mount Pleasant (1 mile west). Further out, we also cover Totton (10 miles north), Hedge End (14 miles north-east), Romsey (15 miles north), Hythe (9 miles north-east), New Milton (5 miles west) and Ringwood (11 miles north-west).

Near you in Boldre

Locally, jobs take us to homes and businesses close to Southlands School, The Red Lion Inn and Priestlands School, among other places. Boldre’s nearest station is Lymington Town station, roughly 1.5 miles south-east of the centre. Other landmarks nearby include St Barbe Museum and Art Gallery (1.5 miles south) and Lymington New Forest Hospital (0.8 miles south). The countryside around Boldre includes Boldre Foreshore.

Map of Boldre © OpenStreetMap contributors

Common problems we fix in Boldre

Silicone does not last for ever. Every shower, every splash and every wipe with a cleaner take their toll over the years, so its life depends on how the room is used, cleaned and aired.

Common reasons people contact us are:

  • Lumpy, uneven sealant from a DIY attempt
  • Damp behind the bath or under the tray
  • A joint torn by a bath that flexes
  • New sealant laid over old sealant that is now lifting

For site and facilities teams at buildings such as William Gilpin Church of England Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.

Comparing quotes

  • How the colour is chosen
  • Whether the sealant suits the joint
  • What preparation is included
  • What the cure time is

Our hiring checklist

Questions from Boldre

Will you come out to Boldre?

Yes, Boldre is covered. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.

Do you cover Boldre for bathroom resealing?

Yes. We work across London and the South East, and Boldre is part of that. You can phone 0345 464 0079 or send us an email and tell us what needs doing.

How long does the new silicone need before I use the shower?

Silicone is touch-dry quite quickly, but it takes longer to cure. Keep water off it for around 24 hours, or as long as we advise for that product.

Do you do commercial work?

Yes. Larger jobs can be planned room by room or area by area.

Is it OK to put new sealant on top of the old bead?

No, and it’s one of the main reasons reseals fail. We cut out all of the old sealant, clean the joint and start again.

Which products do you use?

Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.

Will it make a mess?

No. We work neatly, protect the area around the joints and tidy up afterwards.

Does the resealing come with a guarantee?

Yes. Every job carries our one-year guarantee, and we’re fully insured.

What affects the quote in Boldre

We quote each job individually. This is what makes a difference:

  • The size of the job
  • Access and height
  • Working hours on commercial sites
  • How many areas need sealing

Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. You will know the price before we begin.

Helping us quote

What to tell us when you ask for a quote:

  • Any previous sealing or DIY work
  • Where the job is, and your postcode
  • How many joints, rooms or windows are involved
  • How we’d reach the joints

For a quote, phone 0345 464 0079 or email us and tell us where the job is and what the problem looks like. You will have a clear quote before we start.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job