Hampshire · England
Warborne Bathroom Resealing
Professional bathroom resealing in and around Warborne, with old sealant always removed completely and a 12-month guarantee.
- Leaking joints on a shower screen
- A joint torn by a bath that flexes
- A bead that has pulled away from the tiles
Bathroom resealing in Warborne
Homes in Warborne have the same weak spots as anywhere else: bath edges, tray joints, basin backs and kitchen upstands. Every joint is cut out, cleaned and left dry before it’s resealed. We work on basins & vanity units, shower trays & enclosures and kitchen worktops & upstands, and people most often call us about water getting behind the kitchen upstand and a joint torn by a bath that flexes.
Being in a small place like Warborne makes no difference to the job itself: the journey and access are simply agreed in advance. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
Every job comes with our 12-month guarantee, wherever you are in Hampshire.
- Where
- Warborne (SO41)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Can I do it myself?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Honest limits
Honest advice matters more to us than a booking, so here’s what sealant can’t fix:
- Water coming from the plumbing rather than the joint
- A cracked shower tray or bath (that needs repair or replacement)
- Loose or hollow tiles, or failed tanking behind them
If you are not sure, just call 0345 464 0079 or email us and we will give you a straight answer before booking.
Surfaces we seal
- Baths
- Kitchen worktops & upstands
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
- Sinks & splashbacks
When to call us in Warborne
A bath shifts a little every time it’s filled and emptied. An acrylic bath flexes under load, and a tray that isn’t fully bedded can rock. That movement works at the bead until it splits or peels away.
Any of these means the joints need attention:
- A messy, uneven bead from a previous reseal
- Leaks into the floor or ceiling below
- A bead that has pulled away from the tiles
- Black mould in the silicone that won’t clean off
For landlords with property near Lymington Town station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
What to look for in a quote
- Who turns up on the day
- Whether you can choose the colour
- Whether all the old sealant comes out first
- What preparation is included
Common questions in Warborne
Is Warborne within the area you cover?
Yes, Warborne is covered. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
I let a flat near Lymington Town station. Can you help?
Yes. We work for landlords and agents as well as homeowners. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Can you just seal over the old silicone?
No. A bead laid over old silicone soon starts to come away, because silicone does not bond to silicone. Every trace of the old bead is removed first.
What colours of sealant can you use?
You’re not limited to white: clear, white and colours chosen to suit the room. We can help you pick when we quote.
Do you reseal kitchen worktops and sinks too?
Yes, often alongside a bathroom. Next to the sink we use a food-safe product where it’s needed.
Do you remove the old sealant?
Yes, every time. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
What do you put in the joint?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
Do I have to be there?
It depends on the job. Inside work needs someone to give us access.
Also near Warborne
More services for Warborne
Aftercare tips
So the new joints stay in good condition:
- Never pick at the silicone with a blade
- Wipe the sealant dry after showering
- Wipe up water along the back of the worktop
- Run the extractor fan during and after every shower
Clean the silicone with care: a mild bathroom cleaner and a soft cloth is enough. Scourers and blades can nick the surface, because a damaged bead gives mould a foothold.
Do not wait for a refit to deal with failed sealant. Sealant is a maintenance item, like the paint on a window frame, and renewing it as soon as it fails protects everything around it.
What happens on the day
When we arrive, we start by going over the job with you, so there are no surprises. Surfaces next to the work are protected before we start. Most jobs take a couple of hours for a single bath or shower. Somewhere like Warborne needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We start by protecting the area and stripping out the old bead.
- The joint is cleaned, degreased and treated for mould.
- We let it dry fully and fill the bath with water before sealing.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- We tidy up and give you the cure time, normally around 24 hours.
How to prepare
- Move anything stored near the joints
- Plan for the work area to be out of bounds to pets and children
- Let us know about parking restrictions
Getting a quote
For a quote, call 0345 464 0079 or drop us an email with the location and a short description of the problem. You will have a clear quote before work begins.
Advice
Bathroom resealing around Warborne
Warborne is within about 2 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For an older house near a landmark such as Saint Nicholas Chapel, timber floors under older bathrooms flex, so joints need a sealant that moves with them. For site and facilities teams at buildings such as Southlands School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Warborne is about 1 mile north of Lymington, in Hampshire. Whether you are in the middle of Warborne or further out, we cover bathroom resealing for every kind of property. Warborne is one of 683 towns and villages in Hampshire where we work for bathroom resealing. There’s also a page for Southampton, about 12 miles away.
Postcode districts we cover here for bathroom resealing: SO41. We also cover the places around Warborne: Pilley (1 mile north-east), Boldre (1 mile north-west), Portmore (1 mile east), Pilley Bailey (1 mile north-east) and Bull Hill (1 mile north-east). Larger places within reach include Totton (10 miles north), Hedge End (14 miles north-east), Romsey (15 miles north), Hythe (8 miles north-east), New Milton (5 miles west) and Ringwood (12 miles north-west).
Landmarks near Warborne
Around Warborne, our work takes us to homes and buildings near William Gilpin Church of England Primary School, Priestlands School and Walhampton Arms and the streets around them. For rail, the closest station is Lymington Town station, roughly 1 mile south. Well-known places in the area include St Barbe Museum and Art Gallery (1.2 miles south) and Lymington New Forest Hospital (0.5 miles south-west). Open spaces near Warborne include Boldre Foreshore.
What the job involves on each surface
Shower trays & enclosures
A tray that rocks will split any sealant. We check for movement before we reseal, and tell you if it needs re-bedding first.
Kitchen worktops & upstands
Kitchen joints need more degreasing than bathroom ones, because cooking grease stops sealant bonding. Proper degreasing is what helps the new joint last.
Why it’s worth doing now in Warborne
Bleach and mould sprays may lighten black marks for a while, but mould that has grown into the sealant tends to return. The lasting answer is to remove the bead and start again. Where a wall is exposed, as many are in small places like Warborne, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we’ll explain what it covers.
Why book with us
- 4.9 on Google from 180+ five-star reviews
- Over 20 years’ experience
- Colour agreed with you before work begins
- An ARBOMaster approved applicator
Read what affects the cost or our reviews.