Kent · England
Blean Bathroom Resealing
We cover Blean for bath, shower, basin, wet room, worktop and sink resealing. Old material cut out, joints cleaned and sealed neatly and a 12-month guarantee.
- Failed sealant on the screen profile
- Mouldy sealant that has gone black
- Water getting behind the kitchen upstand
Bathroom resealing for homes and businesses in Blean
The secret of a lasting bead is the preparation. Every bit of old silicone comes out, down to the thin film left on the tiles, after which the joint is degreased and any mould treated. New silicone goes on only when the joint is fully dry. If you have splits where the tray meets the wall and water escaping at the shower enclosure, we can help, whatever the surface.
Homes around Blean are mostly houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we will put it right.
- Place
- Blean (CT2)
- Wider area
- Kent
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
What happens if it’s left?
Fresh sealant smartens a bathroom or kitchen with very little disruption, which helps when a home is being let or put on the market. Lumpy sealant with smears on the tiles has the opposite effect, and it’s harder to put right later. Where a wall is exposed, as many are in small places like Blean, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Why book with us
- 4.9 on Google from 180+ five-star reviews
- A sealant colour to suit the surroundings
- Every job guaranteed for a year
- Tidy, careful work
Take a look at our cost guide and our reviews.
How the visit works
When we arrive, we start by going over the job with you, so you know exactly what we’re doing. We protect the surfaces around the joints before any work starts. Most jobs take a morning or an afternoon for most single baths and showers. In a small place like Blean, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- The joint is cleaned, degreased and treated for mould.
- The joint is left to dry, and baths are filled with water first.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We clear away and tell you when it can get wet, generally after around 24 hours.
Before we arrive
- Let us know if you’ve seen damp or leaks
- Tell us about access, such as stairs, a lift or high-level joints
- Mention any parking rules near the property
Ask for a quote
For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we’ll talk you through the work before giving you a price.
Advice
What affects the cost of bathroom resealing
The price is agreed before any work begins. It takes into account:
- Any mould that needs treating
- How easy the joints are to reach
- Working hours on commercial sites
- The type of sealant required
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
What to tell us for a quote
There’s no need for technical detail. Just tell us:
- How we’d reach the joints
- The address or postcode of the job
- The problem you’ve noticed
- The rough size of the job
To get a quote, phone 0345 464 0079 or drop us an email with the location and a short description of the problem. You will have a clear quote before we start.
Places near Blean
Also in Blean
Blean homes and their sealant
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Canterbury West station change hands often, and a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. For site and facilities teams at buildings such as Blean Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. In the older streets around Church of St Cosmus and St Damian, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Blean is about 3 miles north-west of Canterbury, in Kent. Whether you’re in the middle of Blean or further out, bathroom resealing is available for homes and businesses alike. Blean is one of 922 towns and villages in Kent where we work for bathroom resealing. For nearby work, see our Chelmsford page (38 miles or so).
Postcode districts we cover here for bathroom resealing: CT2. You’ll find streets such as Westfield, School Lane and Vicarage Lane. Blean is on the A290, so it’s easy for us to get to. We also cover Honey Hill (1 mile north-west), Tyler Hill (1 mile east), Denstroude (1 mile north-west), Hackington (1 mile east) and Yorkletts (2 miles north-west). Further out, we also cover Ashford (14 miles south-west), Canterbury (3 miles south-east), Sittingbourne (14 miles west), Whitstable (3 miles north), Faversham (7 miles west) and Herne Bay (6 miles north-east).
Around Blean
Around Blean, our work takes us to homes and buildings near The Archbishop's School, Tyler Hill Meadow and St Edmund's School and the streets around them. For rail, the closest station is Canterbury West station, about 2.1 miles south-east of the centre. A little further out are Sidney Cooper Museum (2.3 miles south-east) and Eastbridge Hospital of St Thomas the Martyr (2.4 miles south-east). Open spaces near Blean include Blean Woods RSPB Reserve.
DIY sealant or a professional job?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Your questions about bathroom resealing in Blean
Will you come out to Blean?
Yes, we do. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
I let a flat near Canterbury West station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can phone 0345 464 0079 or send us an email with the details for a clear quote.
Will it make a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Are you insured?
Yes. We are fully insured, and we can confirm the details when we quote.
Do the sealants smell?
It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Do you do kitchens as well as bathrooms?
Yes, often alongside a bathroom. Where it’s needed by the sink, we use a food-safe sealant.
What information do you need?
Only a few details: the address or postcode, what’s wrong and any access issues. After that, simply call 0345 464 0079 or send us an email.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
Looking after it afterwards
So the new joints stay in good condition:
- Keep the fan on for a while after bathing
- Keep an eye on the corners, where splits start
- Keep scourers and sharp tools away from the bead
- Don’t let bottles sit on the bead
Keep water off the new bead until it has cured, following the cure time we give you. Once it’s cured, wiping it down after use keeps it looking new.
Mould that starts as a few spots spreads through the bead. When it has grown right through, it rarely cleans out. Catching it early keeps it a simple reseal.
For landlords and businesses
We also work for property managers and facilities teams in Blean and across Kent. We can quote a run of properties together, and we’re fully insured for the work.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we’ll give you a quote.
Surface by surface
Shower trays & enclosures
Water often gets past the wall profile of a shower enclosure. It’s resealed along with the tray joints, following the enclosure maker’s guidance on which side to seal.
Basins & vanity units
The back of a basin gets wet every time someone washes. Corners behind basins are where mould tends to start, and we treat it exactly as we would a bath.