Surrey · England
Bathroom & kitchen resealing in Blackheath, Surrey
Bath, shower, basin, wet room, worktop and sink resealing for Blackheath, backed by a 12-month guarantee. Call for a quick quote.
- A reseal done over the top of the old bead
- Leaks into the floor or ceiling below
- Splits where the tray meets the wall
What the job involves on each surface
Shower trays & enclosures
There are normally two jobs in a shower: the tray-to-wall joint and the enclosure joints. Both get soaked every time the shower runs, so both are resealed with anti-fungal sanitary silicone.
Baths
Baths move more than any other fitting, so we fill it with water before sealing. The joint is then laid with the bath at its lowest point and isn’t stretched when it’s used.
Bathroom resealing for homes and businesses in Blackheath
A reseal only lasts if the joint is properly prepared. Every bit of old silicone comes out, down to the thin film left on the tiles, after which the joint is degreased and any mould treated. Only once it’s dry does the new bead go on. Common call-outs are for water getting behind the bath panel and splits where the tray meets the wall, on basins & vanity units, sinks & splashbacks and baths.
Around Blackheath, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
Every job comes with our one-year guarantee, wherever you are in Surrey.

- Place
- Blackheath (GU4)
- Region
- Surrey
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Aftercare tips
A little care helps the new joints last. We recommend:
- Stick to a soft cloth and a mild cleaner
- Open a window or run the fan so the room dries
- Move toiletries away from the joint
- Keep scourers and sharp tools away from the bead
Don’t stand bottles along the bead, as they hold water against it. Squeegeeing the walls and tray after use keeps water from sitting on the joint.
Mould that starts as a few spots spreads through the bead. When it has grown right through, it rarely cleans out. Replacing the sealant early keeps the job small.
Bathroom resealing around Blackheath
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings. There are hotels and other places to stay in and around Blackheath. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room.
In the older streets around Church of St Martin, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. For landlords with property near Chilworth station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. Managing a site like Chilworth CofE (Aided) Infant School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Blackheath is about 4 miles south-east of Guildford, in Surrey. Homes, rented property, offices and hotels in Blackheath can book us for bathroom resealing, old or new, large or small. Every job comes with our 12-month guarantee. Blackheath is one of 395 places in Surrey we cover. You can also see our page for Crawley, about 16 miles away.
Every address in GU4 is covered for bathroom resealing, from the main roads to the quietest streets. Nearby, we also carry out bathroom resealing in Chilworth (1 mile north-west), East Shalford (2 miles north-west), Shalford (2 miles west), Broadford (2 miles west) and Peasmarsh (3 miles west). We also work in nearby towns such as Guildford (4 miles north-west), Woking (8 miles north), Camberley (13 miles north-west), Epsom (14 miles north-east), Horley (15 miles east) and Farnham (12 miles west).
Landmarks near Blackheath
We work in homes and buildings around The Percy Arms and the streets around them. Blackheath’s nearest station is Chilworth station, roughly 0.6 miles north. Well-known places in the area include Guildford Castle (2.9 miles north-west) and Shere Museum (2.8 miles east). Open spaces near Blackheath include St Martha's Hill and St Martha's Hill and Colyer's Hanger.
Quotes for bathroom resealing in Blackheath
Your quote is based on your job. We take into account:
- Whether old sealant or filler has to be cut out
- How many rooms, windows or areas are involved
- When we can work, for business premises
- Access and height
What you pay reflects the work, not a rough estimate. That’s why we ask about the job first and agree the price before starting.
Helping us quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- If someone has resealed it before
- A few photos by email, if you can
- The type of property
- Where the job is, and your postcode
Getting a quote is simple: let us know the job and the location, and roughly how big it is. A few photos by email make the job easier to understand, and we’ll come back to you with a quote.
Questions from Blackheath
Do you take on hotel work around Blackheath?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Do you work for landlords with property near Chilworth station?
Yes, we work for landlords and agents. You can phone 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before any work starts.
What does bathroom resealing cost?
We don’t publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. You will get a clear quote before any work starts.
Can you do several jobs on one visit?
Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Are you ARBOMaster approved?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Is it OK to put new sealant on top of the old bead?
No, and it’s one of the main reasons reseals fail. We cut out all of the old sealant, clean the joint and start again.
How long does it take to reseal a bath or shower?
That depends on the number of joints and the state of the old sealant. For most single baths or showers, allow a couple of hours.
What colours of sealant can you use?
White, clear and a range of colours are available. On a worktop we colour-match where the joint shows.
Leave it or put it right?
Mould removers can fade the surface of a stained bead, but mould that has grown into the sealant tends to return. The lasting answer is to remove the bead and start again. Around Blackheath, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Combining jobs into one visit normally makes better use of the time than several visits. We will give you a clear price for the lot.
Why book with us
- Fully insured
- More than 20 years in sealant work
- Domestic, commercial and hotel work
- Quality sealants from Arbo and Everbuild
See what affects the cost and what customers say.
What else we do in Blackheath
When it is not the sealant
In fairness, some problems need a different trade:
- A cracked shower tray or bath (that needs repair or replacement)
- Loose or hollow tiles, or failed tanking behind them
- Water getting in through the grout rather than the sealant
Not sure which it is? You can ring 0345 464 0079 or send us an email and we’ll tell you honestly.
What we seal
- Kitchen worktops & upstands
- Baths
- Sinks & splashbacks
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
Landlord and commercial work in Blackheath
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we will quote.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
The process
On the day, we start by going over the job with you. Surfaces next to the work are protected before any work begins. Most jobs take around two hours for one bath or shower, longer for a whole bathroom. In a small place like Blackheath, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We cover the area around the joints we’re working on.
- Old sealant is sliced away and the residue removed.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
How to prepare
- Clear items away from the joints we are working on
- Let us know about stairs, lifts or work at height
- Let us know if you’ve seen damp or leaks
Get a quote
Want a quote for bathroom resealing? Please call 0345 464 0079 or drop us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
