Surrey · England
Bathroom & kitchen resealing in Peasmarsh, Surrey
Bathroom resealing across Peasmarsh and nearby, with every bit of old sealant taken out first.
- Failed sealant on the screen profile
- Cracked, shrunken or lifting silicone
- A reseal done over the top of the old bead
Peasmarsh homes and their sealant
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Schools such as Broadwater School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s. For landlords with property near Shalford station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Peasmarsh is about 3 miles south of Guildford, in Surrey. If you need bathroom resealing in Peasmarsh, please phone 0345 464 0079 or send us an email for a quick quote. We are based in Crawley and cover Surrey. Peasmarsh is one of 395 places in Surrey we cover. You can also see our page for Crawley, roughly 18 miles from Peasmarsh.
Every address in GU3 is within our area for bathroom resealing. We cover properties on James Road, Oakdene Road and Unstead Wood. If you’re just outside Peasmarsh, we cover Broadford (1 mile north-east), Artington (1 mile north), Shalford (1 mile north-east), East Shalford (1 mile north-east) and Chilworth (2 miles east). Further out, we also cover Guildford (3 miles north), Woking (7 miles north), Camberley (11 miles north-west), Farnham (9 miles west), Egham (15 miles north) and Walton-on-Thames (14 miles north-east).
Around Peasmarsh
Typical jobs here are in homes near The Queen Victoria pub, Shalford Mill and Shalford Infant School, among other places. Peasmarsh’s nearest station is Shalford station, about 0.8 miles north-east of the centre. Other landmarks nearby include Surrey Police Museum (1 mile north) and Farnham Road Hospital (1.9 miles north). Green spaces nearby include St Catherine's Hill and Farncombe Wood.
Bathroom resealing in Peasmarsh
The secret of a lasting bead is the preparation. Every bit of old silicone comes out, down to the thin film left on the tiles, then the joint is cleaned, degreased and treated for mould. New silicone goes on only when the joint is fully dry. Typical jobs include two layers of silicone, both failing and leaking joints on a shower screen, across kitchen worktops & upstands, shower trays & enclosures and basins & vanity units.
Being in a small place like Peasmarsh makes no difference to the job itself: the journey and access are simply agreed in advance. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
The work is covered for a year after we finish. If there’s a problem with it, please phone 0345 464 0079 or email us.
- Location
- Peasmarsh (GU3)
- Wider area
- Surrey
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Why deal with it now?
You do not need a new bathroom because the sealant looks bad. A new bead often brings the whole room back. If we find a deeper problem, you will hear it from us. Older cottages and farmhouses around Peasmarsh can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Leaving a failed joint usually makes the job bigger, not smaller, as water and mould keep getting in. If you’re unsure, ring 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.
Why book with us
- Any old sealant cut out fully, not covered over
- ARBOMaster approved applicator
- 180+ five-star Google reviews
- Fully insured
How the visit works
We keep the work tidy and contained to the joints we’re treating. Expect the work to take a couple of hours for a single bath or shower, and we explain the cure time before we leave. For a village or hamlet like Peasmarsh, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First, each joint is checked for movement and signs of water.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you are told the cure time, normally around 24 hours.
Getting ready for the visit
- Clear items away from the joints we are working on
- Try not to wet indoor joints just before the visit
- For business premises, tell us about site rules or sign-in
Get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will talk you through the work and give you a clear quote.
Read more
Common questions in Peasmarsh
Do you work for landlords with property near Shalford station?
Yes. We work for letting agents and landlords as well as homeowners. Just call 0345 464 0079 or email us with the address and what needs doing, and we will give you a clear price.
Is Peasmarsh in your area for bathroom resealing?
Yes, Peasmarsh is within the area we cover. Our work covers London and the South East. Just call 0345 464 0079 or drop us an email with a few details of the job.
Are you ARBOMaster approved?
Yes. We are an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
Does the resealing come with a guarantee?
Yes. We give a 12-month guarantee on every job, and we are ARBOMaster approved applicators.
Will the old sealant be removed?
Yes. We cut out all the old sealant and clean the joint before resealing.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Can new silicone go straight over the old?
No, and it’s one of the main reasons reseals fail. We cut out all of the old sealant, clean the joint and start again.
Will there be a smell?
There can be a smell while the sealant cures. Ventilation helps.
Landlord and commercial work in Peasmarsh
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together.
Also near Peasmarsh
Also in Peasmarsh
Do you need bathroom resealing in Peasmarsh?
Silicone does not last for ever. Daily water, heat and cleaning products slowly wear it down, so its life depends on how the room is used, cleaned and aired.
Any of these means the joints need attention:
- A joint torn by a bath that flexes
- Smears of silicone across the tiles
- Leaks into the floor or ceiling below
- Water escaping at the shower enclosure
If you live in an older home near St Michael, older homes can move a little, which is hard on rigid grout and tired sealant.
What to look for in a quote
- What the cure time is
- What insurance they hold
- Which colour the sealant will be
- What preparation is included
What we can’t put right
Sealant isn’t the answer to every problem, and we’d rather say so up front. It won’t solve:
- Tiles that have come away from the wall
- A tray that rocks until it’s re-bedded
- A tray or bath that’s cracked through
Not sure which it is? You can call 0345 464 0079 or drop us an email and we’ll tell you honestly.
Where we work in Peasmarsh
- Kitchen worktops & upstands
- Basins & vanity units
- Wet rooms
- Shower trays & enclosures
- Baths
- Sinks & splashbacks
Keeping the joints in good condition
Good habits help new joints last longer. Our tips:
- Don’t leave water standing on kitchen joints
- Keep bottles off the sealant line
- Use gentle cleaners on the silicone
- Wait for the cure time we give you
In a kitchen, do not let water sit along the back of the worktop and keep hot pans away from the silicone. A dry joint lasts longer.
A failed kitchen joint is easy to miss. Water gets behind the upstand and into the edge of a laminate worktop, and the board underneath can swell. Resealing before that happens protects the worktop.
DIY versus a professional finish
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.