Kent · England
Bathroom & kitchen resealing in Bean, Kent
Bath, shower, basin, wet room, worktop and sink resealing in Bean, with a one-year guarantee on every job. Ask us for a quote.
- Water getting behind the kitchen upstand
- Gaps where the bath or tray has moved
- Failed sealant on the screen profile
About our bathroom resealing in Bean
Homes in Bean have the same weak spots as anywhere else: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Each one is stripped, cleaned and dried before new silicone goes in. If you have failed sealant on the screen profile and leaks into the floor or ceiling below, we can put it right.
In a village or hamlet like Bean, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
The work is covered for a year after we finish. If there’s a problem with it, please phone 0345 464 0079 or drop us an email.
- Where
- Bean (DA2)
- Region
- Kent
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Common problems we fix in Bean
Silicone needs a clean, dry surface without any grease to stick to. Soap residue, oils and leftover silicone film all get in the way, so a rushed job can start to lift early.
Common reasons people contact us are:
- Splits where the tray meets the wall
- Smears of silicone across the tiles
- Leaking joints on a shower screen
- Leaks into the floor or ceiling below
If you look after a building such as Bean Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Before you book anyone
- What insurance they hold
- How long to leave it before use
- How long the guarantee is
- How the surfaces are prepared before sealing
How we quote for bathroom resealing
Your quote is based on your job. We look at:
- Working hours on commercial sites
- The size of the job
- Access and height
- How many areas need sealing
We don’t show prices on the website, because the cost depends so much on the job itself. For a quick quote, please call 0345 464 0079 or drop us an email.
Helping us quote
When you contact us, it’s useful to know:
- Where the job is, and your postcode
- The type of property
- What the problem is, such as mould, gaps, leaks or cracking
- Roughly how big the job is
We don’t publish a price list, because every job is different. Instead, we give you a clear quote for your job. To get started, ring 0345 464 0079 or send us an email.
Bean questions
Is Bean within the area you cover?
Yes, Bean is covered. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Is Bean in your area for bathroom resealing?
Yes. Our work covers London and the South East, and Bean is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job, and we’ll give you a clear quote.
Can mouldy silicone be sorted out?
Yes. Once mould has grown into the silicone, it generally cannot be cleaned out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
Can you do several jobs on one visit?
Yes. More than one area can be quoted together.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Where do you work from?
We’re a Crawley-based firm, with over 20 years’ experience. We work across South East England, London and Scotland.
What sealant do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we’ll explain our choice.
How much does bathroom resealing cost in Bean?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
Should I try it myself first?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
What happens if it’s left?
The difference in a professional reseal is mostly what you do not see: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Without that preparation, the new bead will not last. Around Bean, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Call for a quick quote and we’ll go through it with you.
Why Bean customers choose us
- Sealant colour chosen to suit
- Domestic, commercial and hotel work
- Full insurance on every job
- We agree the colour with you first
See what affects the cost and what customers say.
For landlords and businesses
Landlords and letting agents in Bean can book us as well as householders. Resealing between tenancies is a simple way to keep a property in good order before the next move-in.
Letting agents often deal with us directly. Tell us the address, the job and how access works.
Aftercare tips
Looking after new joints is easy, and it makes a real difference:
- Keep scourers and sharp tools away from the bead
- Move toiletries away from the joint
- Stick to a soft cloth and a mild cleaner
- Open a window or run the fan so the room dries
Treat the new bead gently when you clean: warm soapy water and a soft cloth do the job. Scourers and blades can nick the surface, because a damaged bead gives mould a foothold.
A failed kitchen joint is easy to miss. Water gets behind the upstand and into the edge of a laminate worktop, where it can make the board swell. A reseal in time can save the worktop.
Nearby places to Bean
Also in Bean
Bathroom resealing in Bean: local notes
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Greenhithe for Bluewater station change hands often, and a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Bean is about 3 miles west of Northfleet, in Kent. Our applicators cover bathroom resealing for householders, landlords and businesses in Bean. Our Kent coverage runs to 922 places, and Bean is one of them. For nearby work, see our London page (17 miles or so).
Postcode districts we cover here for bathroom resealing: DA2. Streets in the area include High Street, Drudgeon Way and Foxwood Road, all of which we cover. Bean sits on or near the B255, so getting to you is simple. Other places close to Bean include Green Street Green (1 mile south), Westwood (1 mile south-east), Darenth (1 mile west), Swanscombe (1 mile north) and Grubb Street (1 mile south). We also work in nearby towns such as Maidstone (15 miles south-east), Dartford (3 miles north-west), Sevenoaks (11 miles south-west), Gravesend (4 miles east), Northfleet (3 miles east) and Swanley (5 miles south-west).
What’s near Bean
Typical jobs here are in homes near Beacon Wood Country Park, The Ebbsfleet Academy and The Black Horse pub and the streets around them. For rail, the closest station is Greenhithe for Bluewater station, about 1.7 miles north of the centre. Well-known places in the area include Stone Museum of Geology (2.2 miles north-west) and Stone Castle (1.2 miles north). Not far away are Chafford Gorges Nature Park and Sawyers Lake.
How the visit works
Good joint work is mostly preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes a morning or an afternoon for most single baths and showers. For a village or hamlet like Bean, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First, each joint is checked for movement and signs of water.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you’re told the cure time, normally around 24 hours.
Getting ready for the visit
- Mention any parking rules near the property
- Move anything stored near the joints
- On commercial sites, let us know about site rules
Getting a quote
To get a quote, phone 0345 464 0079 or send us an email with the location and a short description of the problem. You’ll have a clear quote before work begins.