Highland · Scotland
Bathroom Resealing in An Luirg
Bath, shower, basin, wet room, worktop and sink resealing in An Luirg, with a 12-month guarantee on every job. Call for a quick quote.
- Water escaping at the shower enclosure
- Mouldy sealant that has gone black
- Cracked, shrunken or lifting silicone
How we handle bathroom resealing in An Luirg
The secret of a lasting bead is the preparation. The old sealant is removed to the last smear, after which the joint is degreased and any mould treated. New silicone goes on only when the joint is fully dry. If you are dealing with water getting behind the bath panel and splits where the tray meets the wall, we can help.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
All of our work is guaranteed for twelve months, in An Luirg and everywhere else we cover.
- Location
- An Luirg (IV27)
- Wider area
- Highland
- Guarantee
- 12 months on all our work
- Quote
- A clear price before work begins
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What happens on the day
There isn’t much for you to do on the day. Point us to the joints and we’ll get on with it. The work itself takes half a day or less for one room, longer when the kitchen is included, including the tidy-up. Outdoor work around An Luirg depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Work indoors isn’t affected.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- The joint is cleaned, degreased and treated for mould.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- We tool the bead to a neat finish and give you the cure time, usually around 24 hours.
Preparing for the visit
- Plan for the work area to be out of bounds to pets and children
- Tell us if parking is tricky
- Clear the area around the work
Ask for a quote
We quote each job on its own, so start by telling us what you need. Simply drop us a line at info@mrmastic.co.uk and describe the job and send photos if you have them.
Advice
Places near An Luirg
What else we do in An Luirg
Keeping the joints in good condition
So the new joints stay in good condition:
- Wipe up water along the back of the worktop
- Clean with a mild bathroom cleaner and a soft cloth
- Check the joints every few months for splits or lifting
- Keep scourers and sharp tools away from the bead
Keep bottles and razors off the sealant line, because they trap water against the silicone. Squeegeeing the walls and tray after use keeps water from sitting on the joint.
A few black dots in the silicone soon become a black line. Once it’s deep in the silicone, cleaning normally will not remove it, and nearby grout often goes the same way. Catching it early keeps it a simple reseal.
Work for landlords, hotels and businesses
Hotels need rooms back in use, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Your questions about bathroom resealing in An Luirg
I let a flat near Lairg station. Can you help?
Yes, we work for landlords and agents. Just drop us a line at info@mrmastic.co.uk and tell us about the property, and we’ll give you a clear price.
Is An Luirg within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
What do you need from me for a quote?
Only a few details: the address or postcode, what’s wrong and any access issues. Then email us at info@mrmastic.co.uk.
What colours of sealant can you use?
White, clear and a range of colours are available. Where the joint is on show, we match it to the surface.
How long will the resealing take?
One bath or shower is around two hours’ work, old sealant removal included. A whole bathroom plus the kitchen may take most of the day.
Should I try DIY first?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.
Is it messy?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
My sealant has gone black. Can you sort it?
Yes. Once mould has grown into the silicone, it normally can’t be cleaned out for good, so the bead comes out, the joint is treated and new anti-fungal silicone goes in.
Bathrooms and kitchens in An Luirg
Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black. In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies.
In and around An Luirg, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint. Rented homes near Lairg station change hands often, and a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
An Luirg (Gaelic: Lairg) is about 36 miles north-west of Nairn, in Highland. Every kind of property in An Luirg can book us for bathroom resealing, old or new, large or small. Every job comes with our one-year guarantee. An Luirg is one of 253 places in Highland we cover.
All of IV27 is covered for bathroom resealing, from the main roads to the quietest streets. Bathroom resealing is available to properties on Main Street, Rathad Cnoc na H-Eaglais and Milnclarin Way and the roads around them. Other places close to An Luirg include Innis nan Lìon (8 miles west), Bonar Bridge (9 miles south), Lower Gledfield (10 miles south), Ardgay (10 miles south) and Spinningdale (12 miles south-east). Island and remote addresses take a little more planning, so please mention your location when you send an email to info@mrmastic.co.uk.
Around An Luirg
The closest station to An Luirg is Lairg station, roughly 1.6 miles south of the centre. Open spaces near An Luirg include Loch Dola and The Ord.
What affects the cost of bathroom resealing
We quote each job individually. These are the things that affect it:
- The old material and how stubborn it is
- Any mould that needs treating
- Whether the work is at height
- When we can work, for business premises
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Ask us for a quote and we will go through it with you.
Helping us quote
When you contact us, it’s useful to know:
- Whether it’s a home or a business
- Where the property is
- The rough size of the job
- A few photos by email, if you can
Quotes start with a quick conversation. Describe the problem, the location and the size of the job. When it suits you, drop us a line at info@mrmastic.co.uk.
Different surfaces, different methods
Baths
Baths move more than any other fitting, so we fill it with water before sealing. That way the joint is laid with the bath at its heaviest.
Kitchen worktops & upstands
The joint between worktop and wall takes splashes, crumbs and cleaning sprays. The new bead is colour-matched where it shows.
Why deal with it now?
A clean new bead makes a room look cared for, which matters if you’re letting a property or selling it. A smeared, uneven DIY bead does the opposite, and it’s harder to put right later. Around An Luirg, water from a failed joint in an older stone home can soak into timber and plaster.
Combining jobs into one visit normally makes better use of the time than several visits, so tell us about everything that needs sealing. We will send you a clear quote for the lot.
Why An Luirg clients choose us
- White, clear, grey or another colour, product permitting
- Anti-fungal sanitary silicone in wet areas
- Rated 4.9 stars on Google
- Tidy, careful work
See what affects the cost and what customers say.
Can I do it myself?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.