Surrey · England
Bathroom Resealing in Alfold Crossways
Bathroom resealing across Alfold Crossways and nearby, with every bit of old sealant taken out first and a 12-month guarantee.
- Leaks into the floor or ceiling below
- Water getting behind the kitchen upstand
- Gaps where the bath or tray has moved
Bathroom resealing around Alfold Crossways
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Around Alfold Crossways, as everywhere, bathroom resealing is only as good as the preparation behind it. Homes close to Church of St Nicholas include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Alfold Crossways is about 9 miles west of Horsham, in Surrey. Anywhere in GU6, we can carry out bathroom resealing at your property. Alfold Crossways is one of 395 places in Surrey we cover for bathroom resealing. We also work in Crawley, around 14 miles away.
Work in GU6 works the same way as everywhere else we cover. You will find streets such as Loxwood Road, Chilton Close and Molten Way. If you’re just outside Alfold Crossways, we cover Dunsfold (2 miles north-west), Elmbridge Village (3 miles north), Loxhill (3 miles north-west), Rowly (4 miles north) and Hascombe (4 miles north-west). Within a short drive, we also cover Guildford (10 miles north), Woking (15 miles north), Farnham (14 miles north-west), Dorking (12 miles north-east), Haslemere (9 miles west) and Cranleigh (3 miles north-east).
Local landmarks in Alfold Crossways
Around Alfold Crossways, our work takes us to homes and buildings near The Crown pub and Fir Tree Copse, among other places. For a walk, there’s Hydon's Ball.
Bathroom resealing in Alfold Crossways
Across Alfold Crossways, the joints we reseal are the ones that fail in any home: bath edges, tray joints, basin backs and kitchen upstands. Each one is stripped, cleaned and dried before new silicone goes in. Typical jobs include black mould in the silicone that won’t clean off and water getting behind the bath panel, on shower trays & enclosures, wet rooms and baths.
For a small place like Alfold Crossways, bathroom resealing is planned like any other job: it just means planning the journey and access beforehand. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
We stand behind the work with a one-year guarantee, so you are covered after we have gone.
- Location
- Alfold Crossways (GU6)
- Region
- Surrey
- Guarantee
- 12 months on all our work
- Quote
- A clear price before we start
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Why it’s worth doing now in Alfold Crossways
A quick bead over the top of the old one might look better for a while, but it will not bond. Water creeps under it and mould follows, so the next person has twice as much to remove. In a small place like Alfold Crossways, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Ask us for a quote and we will go through it with you.
Why Alfold Crossways clients choose us
- Anti-fungal sanitary silicone in wet areas
- You choose the colour before work begins
- We leave the area clean and tidy
- White, clear, grey or coloured to suit, where the product allows
Read how sealant jobs are priced and our reviews.
Can I do it myself?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Surface by surface
Kitchen worktops & upstands
Laminate worktops swell if water gets into the core. A sound joint along the back edge stops that, as long as the worktop itself is firmly fixed.
Shower trays & enclosures
If a tray moves underfoot, new silicone won’t last. We check for movement before we reseal, and tell you if it needs re-bedding first.
For landlords and businesses
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
What affects the quote in Alfold Crossways
We do not publish a price list, because no two jobs are the same. The quote depends on:
- Mould in or behind the old joints
- The number and length of the joints
- Access and height
- The type of sealant required
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Helping us quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- How many joints, rooms or windows are involved
- If someone has resealed it before
- A few photos by email, if you can
- Access, such as stairs, a lift or height
We quote each job on its own, so the first step is telling us about yours. Simply ring 0345 464 0079 or drop us an email and describe the job and send photos if you have them.
What happens on the day
You don’t need to clear the whole room or building, only the area right around the joints. Everything nearby is protected, and the job takes two to three hours for a typical bath, depending on how much old sealant there is in most cases. Somewhere as small as Alfold Crossways, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We cover the area around the joints we’re working on.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
Getting ready for the visit
- Mention any parking rules near the property
- Clear the area around the work
- Let us know about earlier repairs to the joints
Get a quote
Need a quote? Please ring 0345 464 0079 or drop us an email and tell us about the job. We’ll explain what we’d do and give you a clear price before work begins.
Related advice
More services for Alfold Crossways
What sealant work can’t fix
Sealant isn’t the answer to every problem, and we’d rather say so up front. Sealant will not put right:
- A cracked shower tray or bath (that needs repair or replacement)
- Cracked or missing grout between tiles (that’s regrouting)
- Loose or hollow tiles, or failed tanking behind them
If in doubt, call 0345 464 0079 or email us and we’ll say what we think before booking.
Where we work in Alfold Crossways
- Wet rooms
- Basins & vanity units
- Shower trays & enclosures
- Baths
- Sinks & splashbacks
- Kitchen worktops & upstands
Questions from Alfold Crossways
Can you do bathroom resealing in Alfold Crossways?
Yes, Alfold Crossways is within the area we cover. Our work covers London and the South East. Just call 0345 464 0079 or send us an email with a few details of the job.
Is there a guarantee on bathroom resealing in Alfold Crossways?
Every job comes with our one-year guarantee, wherever it is. We’re fully insured, and an ARBOMaster approved applicator.
My sealant has gone black. Can you sort it?
Yes. Once mould has grown into the silicone, it generally cannot be cleaned out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
What should I tell you?
Tell us what needs doing and where. We’ll ask anything else we need to know.
Do you work for hotels and businesses?
Yes, regularly. Larger jobs can be planned room by room or area by area.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Just make sure your landlord agrees.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Is it OK to put new sealant on top of the old bead?
No, never. Sealing over the top looks fine for a few weeks, then lifts. We remove the old bead completely before resealing.