West Sussex · England
Bathroom & kitchen resealing in Aldingbourne, West Sussex
Bathroom resealing in Aldingbourne from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- New sealant laid over old sealant that is now lifting
- Leaking joints on a shower screen
- A joint torn by a bath that flexes
Bathroom resealing in Aldingbourne: local notes
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For an older house near a landmark such as The Parish Church of St Mary, older homes can move a little, which is hard on rigid grout and tired sealant. For landlords with property near Barnham station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Aldingbourne is about 3 miles north of Bognor Regis, in West Sussex. Aldingbourne gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Aldingbourne is one of 371 towns and villages in West Sussex where we work for bathroom resealing. There’s also a page for Portsmouth, roughly 17 miles from Aldingbourne.
Postcode districts we cover here for bathroom resealing: PO20. Local streets include Hook Lane and Park Lane, and we cover them all. Close by, we work in Nyton (1 mile east), Norton (1 mile north), Westergate (1 mile east), East Hampnett (1 mile north-west) and Crockerhill (1 mile north). We also work in nearby towns such as Worthing (13 miles east), Bognor Regis (3 miles south), Chichester (4 miles west), Selsey (9 miles south-west), Littlehampton (7 miles east) and Emsworth (11 miles west).
Near you in Aldingbourne
We work in homes and buildings around Ormiston Six Villages Academy and the streets around them. For rail, the closest station is Barnham station, roughly 2.1 miles east of the centre. A little further out are The Chichester City Museum (3.9 miles west) and Bognor Regis War Memorial Hospital (3.3 miles south).
Bathroom resealing for homes and businesses in Aldingbourne
A shower joint gets soaked every day. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. They’re resealed with anti-fungal sanitary silicone, finished smooth so water drains away rather than collecting. Common call-outs are for shrunken sealant along the back of a worktop and failed sealant on the screen profile, across kitchen worktops & upstands, sinks & splashbacks and baths.
For a small place like Aldingbourne, bathroom resealing is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
You are covered for a year from the day we finish. If there’s a problem with it, please phone 0345 464 0079 or drop us an email.
- Location
- Aldingbourne (PO20)
- Wider area
- West Sussex
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
For landlords and businesses
Landlords and letting agents in Aldingbourne can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for.
We also work for property managers and facilities teams. Several sites can go on one quote.
Aldingbourne questions
I let a flat near Barnham station. Can you help?
Yes, rental work is part of what we do. You can call 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before work begins.
Is Aldingbourne in your area for bathroom resealing?
Yes. We work across London and the South East, and Aldingbourne is part of that. Just phone 0345 464 0079 or send us an email with a few details of the job.
Do you do commercial work?
Yes. We work in offices, washrooms, hotels and other commercial premises, as well as homes. Working times can be discussed when we quote.
Do you reseal kitchen worktops and sinks too?
Yes. Worktops, sinks and splashbacks are all part of the job, with a sealant suited to kitchens, colour-matched where it shows.
Will the old sealant be removed?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
Can you just seal over the old silicone?
No, and it’s one of the main reasons reseals fail. The old joint is stripped, cleaned and resealed from scratch.
What does bathroom resealing cost?
It depends on the job, so we quote each one individually. For a quick quote, call 0345 464 0079 or send us an email and let us know what needs doing and where.
Are you insured?
Yes, we are fully insured for every job we do.
Keeping the joints in good condition
Looking after new joints is easy, and it makes a real difference:
- Keep scourers and sharp tools away from the bead
- Give the silicone its full cure time
- Open a window or run the fan so the room dries
- Wipe up water along the back of the worktop
Wipe up standing water along the worktop joint. The drier the joint stays, the longer it lasts.
Worktop joints fail quietly. Water gets behind the upstand and into the edge of a laminate worktop, and the board underneath can swell. Resealing before that happens protects the worktop.
Nearby places to Aldingbourne
What else we do in Aldingbourne
Signs you need bathroom resealing in Aldingbourne
Older sealant shrinks and hardens. Along worktops it tends to pull back from the wall, leaving a thin gap where water and food collect. Heat from the hob and strong sprays speed it along.
Look out for any of the following:
- A messy, uneven bead from a previous reseal
- Damp behind the bath or under the tray
- Mouldy sealant that has gone black
- A joint torn by a bath that flexes
Managing a site like Aldingbourne Primary School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
What to look for in a quote
- How long the guarantee is
- Which sealant they’ll use, and why
- How hidden problems are handled
- What preparation is included
When something else is needed
Honest advice matters more to us than a booking, so here’s what sealant cannot fix:
- A bath or tray that moves because it is not properly supported
- Tiles that have come away from the wall
- A tray or bath that is cracked through
Not sure which it is? You can call 0345 464 0079 or drop us an email and we’ll tell you honestly.
Joints and surfaces we work on
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
- Baths
- Sinks & splashbacks
- Kitchen worktops & upstands
What we do, step by step
Our applicators work methodically: protect, prepare, seal, tidy. For most jobs that takes half a day or less for one room, longer when the kitchen is included, and the area is left clean. For a village or hamlet like Aldingbourne, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- The bead is tooled smooth and you’re told the cure time, usually around 24 hours.
Getting ready for the visit
- Move anything stored near the joints
- Mention any sign-in or site rules at work premises
- Tell us about access, such as stairs, a lift or high-level joints
Get a quote
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand, and we’ll come back to you with a quote.
Read more
Should I try it myself first?
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again.
Surface by surface
Basins & vanity units
Vanity units have long, worktop-style joints against the wall. Water that gets behind can damage the unit, so the joint is sealed in one unbroken line.
Wet rooms
Not every wet room leak is a sealant problem. We check the joints and say so if the fault looks to be elsewhere.