Aberdeenshire · Scotland
Window & door mastic in Tarland, Aberdeenshire
Window mastic across Tarland and nearby, with every bit of old sealant taken out first.
- Draughts coming in around windows and doors
- White mastic on grey or black frames
- Leaking joints at the ends of sills
Window mastic in Tarland
Some gaps around frames are far deeper than they look. Packing it solid with sealant gives a joint that cannot flex, so we fit backing rod to set the right depth. That way the new bead bonds to the frame and the wall only. If you’re dealing with draughts coming in around windows and doors and mastic that’s falling out in pieces, we can put it right.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses, many standing in the open. Exposed frames and sills take the full force of wind-driven rain.
The work is covered for a year after we finish. If anything is not right with it, send an email to info@mrmastic.co.uk.
- Where
- Tarland (AB34)
- Wider area
- Aberdeenshire
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Tarland homes and the weather
Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and sound outside sealant is part of that. Many older homes in Scotland have sash and case windows, often pointed into the wall with traditional sand mastic.
In and around Tarland, as anywhere, good window mastic starts with a clean, dry, properly prepared joint.
Tarland is about 21 miles south-west of Inverurie, in Aberdeenshire. Wherever you are in the AB34 postcode area, our applicators can take on window mastic. Our area takes in 161 places across Aberdeenshire, from the larger towns to small villages. You can also see our page for Aberdeen, roughly 28 miles from Tarland.
All of AB34 is covered for window mastic, from the main roads to the quietest streets. We cover properties on Market Stance, The Square and Melgum Road. Close by, we work in Dinnet (4 miles south), Aboyne (4 miles south-east), Birsemore (5 miles south-east), Towie (6 miles north-west) and Lumphanan (6 miles east). Within a short drive, we also cover Banchory (15 miles east), Alford (9 miles north-east), Ballater (9 miles south-west) and Torphins (9 miles east).
Local landmarks in Tarland
A little further out are Aboyne Hospital (5 miles south-east) and Coull Castle (2.4 miles south-east). For a walk, there’s Craiglich and Loch Davan.
What we are called out for in Tarland
Joints that are too thin or too deep fail early. A skim of sealant over a wide gap soon tears, while a joint packed solid can’t stretch. That is what backing rod is for.
Signs it’s time to call us include:
- Untidy mastic left by window fitters
- Old mastic that has gone black or come away
- A bead that doesn’t match the frame
- Damp patches on the reveal after heavy rain
Homes close to Tarland Old Parish Church include some older properties, and the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.
Questions to ask before you book
- How long to leave it before use
- How long the guarantee is
- What preparation is included
- Are they insured?
Honest limits
In fairness, there are a few things sealant won’t fix:
- A frame that has rotted at the joint
- Worn gaskets, brush seals or a door that has dropped
- Damp problems in the wall away from the window
If in doubt, email us at info@mrmastic.co.uk and we will say what we think.
What we seal
- uPVC windows
- Composite doors
- Aluminium frames
- Timber windows & doors
- Window sills
- Patio & French doors
DIY sealant or a professional job?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
Different surfaces, different methods
Aluminium frames
Metal frames expand in the sun and are often slim, with little room for error. A neat, narrow bead in a colour to match keeps the clean look.
Window sills
Sills catch the water running down the glass, so the joints at each end and underneath matter. Each is cleaned out and resealed.
Why it’s worth doing now in Tarland
Not every sealant suits a window. Interior caulk and bathroom silicone are not made for exterior frame joints. An exterior, low-modulus sealant stays flexible in sun and frost. In a place like Tarland, small leaks are easy to put off, but water behind a failed seal does the most damage when nobody’s watching.
The cost depends on how much there is to do, how hard the old material is to remove and access to the work. We give a clear quote before any work starts, so you know where you stand.
Why Tarland customers choose us
- Colour picked to suit the job
- Experience in homes, commercial sites and hotels
- One-year guarantee on every job
- 4.9 on Google from 180+ five-star reviews
How the visit works
When we arrive, we look over the joints with you first, so there are no surprises. We protect the surfaces around the joints before we start. Most jobs take a few hours for a handful of frames, longer for a whole house. Outside jobs in Tarland need a dry day, because sealant will not bond to a wet joint, so external jobs may need to move if the day turns wet. Work indoors isn’t affected.
- We check how each frame can be reached safely.
- Old, cracked mastic is removed completely.
- The surfaces are cleaned and left dry, and primed where the sealant calls for it.
- Backing rod fills deep voids and the sealant goes in on top.
- The joint is shaped to shed water and the area tidied.
Before we arrive
- Mention any leaks or damp you’ve noticed
- Mention any parking rules near the property
- Keep children and pets away from the work area
Get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.
Advice
Tarland: your questions answered
Is Tarland in your area for window mastic?
Yes. Our work covers the whole of Scotland, and Tarland is part of that. You can email us at info@mrmastic.co.uk and let us know what needs doing, and we will give you a clear quote.
What guarantee comes with window mastic in Tarland?
All our work, in Tarland and everywhere else, comes with a 12-month guarantee. We are fully insured, and an ARBOMaster approved applicator.
Can you seal the gap between the frame and the plaster indoors?
Yes. Inside, the joint between frame and plaster is sealed neatly.
Can you reach windows above the ground floor?
Yes, where they can be reached safely. Let us know about access when you ask for a quote so we can plan the job.
What do you put in the joint?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we will explain our choice.
Do you have insurance?
Yes. We are fully insured.
Are you an approved applicator?
Yes. We are approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.
Will new mastic stop draughts?
In many cases. The gap between frame and wall is a common source of draughts, and sealing the inside and outside joints closes that path.
Landlords, agents and businesses in Tarland
We work for letting agents and landlords as well as householders. Resealing between tenancies keeps a property looking cared for.
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.