Essex · England
Shotgate Window Mastic
Window mastic across Shotgate and nearby, with old sealant always removed completely.
- Whistling draughts around closed windows
- Rushed sealant from a window installation
- Cracked internal joints between frame and plaster
Window mastic in Shotgate
Behind a thin line of old mastic there’s sometimes a deep void. Packing it solid with sealant gives a joint that can’t flex, so we fit backing rod to set the right depth. The sealant then grips the two sides it should. We work on uPVC windows, window sills and aluminium frames, and the jobs we see most are black, perished sealant on frames and hard, cracked sealant around windows.
In a village or hamlet like Shotgate, older cottages and farmhouses often have timber windows set in stone or brick. Older buildings like these don’t always suit modern silicone, so the sealant has to be chosen to suit the building.
The work is covered for a year after we finish. If anything is not right with it, ring 0345 464 0079 or email us.
- Where
- Shotgate (SS11, SS12)
- Wider area
- Essex
- Guarantee
- A year, on every job
- Price
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
What window mastic looks like in Shotgate
London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
For landlords with property near Battlesbridge station, cracked frame mastic tends to show up as a draught or damp complaint, so it’s worth checking between lets. Schools such as Beauchamps High School are buildings too, and its window and door frames need their mastic kept sound, just like a home’s.
Shotgate is about 1 mile east of Wickford, in Essex. We carry out window mastic for homes and businesses in Shotgate and the surrounding area. Across Essex, we cover 644 places, and Shotgate is one of them. Our Chelmsford page covers work nearby.
All of SS11 and SS12 is covered for window mastic. If you need window mastic at a property on Third Avenue, First Avenue and Second Avenue or a nearby road, our applicators can take on the job. Neighbouring places we cover for window mastic include Rawreth (1 mile east), Wickford (1 mile west), Battlesbridge (1 mile north-east), Runwell (2 miles north-west) and Brock Hill (3 miles north-west). Within a short drive, we also cover Chelmsford (9 miles north), Basildon (5 miles south-west), Brentwood (11 miles west), Maldon (10 miles north-east), Canvey Island (6 miles south) and Billericay (6 miles west).
Landmarks near Shotgate
Locally, jobs take us to homes and businesses close to Hilltop Infant School. Shotgate’s nearest station is Battlesbridge station, roughly 1.3 miles north-east. A little further out are Basildon University Hospital (5.5 miles south-west) and Battlesbridge Motorcycle Museum (1.3 miles north-east). Open spaces near Shotgate include Shotgate Thickets.
Nearby places to Shotgate
More services for Shotgate
What affects the quote in Shotgate
Call for a quick quote. The main things that affect it are:
- How much there is to do
- Access and height
- The old material and how stubborn it is
- How many rooms, windows or areas are involved
Leaving a failed joint usually makes the job bigger, not smaller. If you are not sure whether it needs doing, phone 0345 464 0079 or send us an email and we’ll give you an honest view and a quote.
Helping us quote
Photos help, but a description is a good start. Try to tell us:
- Pictures of the joints, sent by email
- The address or postcode of the job
- Access, such as stairs, a lift or height
- Roughly how big the job is
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that is easy.
What happens on the day
Once we are on site, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. Most jobs then take most of a day for a typical house, less for a few frames. In a small place like Shotgate, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We check how each frame can be reached safely.
- Old, cracked mastic is removed completely.
- The surfaces are cleaned and left dry, and primed where the sealant calls for it.
- Backing rod fills deep voids and the sealant goes in on top.
- We tool the joint so water runs off, then clear up.
Before we arrive
- Let us know about parking restrictions
- Clear items away from the joints we are working on
- Mention if the joints have been sealed before
Ask for a quote
If you are in Shotgate and need window mastic, phone 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
Advice
Keeping the joints in good condition
No joint lasts for ever, but care makes a real difference. A few tips:
- Keep timber frames painted
- Don’t paint over the silicone
- Ventilate rooms so frames do not stay wet inside
- Make sure the drainage slots aren’t blocked
Try not to touch the new joint while it cures, following the cure time we give you. Don’t point a pressure washer at the joints.
Draughts get worse, not better. As the old mastic shrinks further, more air gets through, and a cold room gets colder. Resealing closes it.
Honest limits
It helps to know what we can’t do too:
- Penetrating damp from a failed cavity tray or render
- Rotten timber, which needs a joiner first
- A sash or casement that will not close properly
Not sure which it is? You can ring 0345 464 0079 or email us and we will tell you honestly.
Surfaces we seal
- Patio & French doors
- Composite doors
- Timber windows & doors
- uPVC windows
- Window sills
- Aluminium frames
How the job changes by surface
Patio & French doors
Patio and French doors have the longest joints on most houses. Most leaks start at the bottom corners, so we pay close attention there.
Composite doors
A composite door generally sits in a plastic outer frame, and the joint around it is sealed like a window. We match the colour to the frame.
Should I try it myself first?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Questions from Shotgate
Will you come out to Shotgate?
Yes. Shotgate is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for landlords with property near Battlesbridge station?
Yes, landlords and agents are among the people we work for. You can call 0345 464 0079 or send us an email with the details for a clear quote.
Can you get sealant to suit coloured frames?
Yes. Grey and black frames get grey or black sealant, and wood-effect frames usually suit brown.
How long does it take to reseal the windows on a house?
Allow a morning for a couple of windows and a door. Access and the amount of old mastic make the biggest difference.
Do the sealants smell?
That depends on the sealant. Some products have a noticeable smell, others very little.
Can you do upstairs windows?
Yes, where it’s safe. Higher or awkward frames may need extra access, and we will confirm what’s needed.
Can you work on commercial sites?
Yes. Larger jobs can be planned room by room or area by area.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Common problems we fix in Shotgate
Joint shape matters as much as the product. A thin smear across a wide gap has nothing to it, and a gap filled solid cannot flex. That is what backing rod is for.
Signs it’s time to call us include:
- Gaps left after new windows were fitted
- A bead that does not match the frame
- Rain getting in at the frame or under the sill
- Cracked internal joints between frame and plaster
Homes close to Church of St Nicholas include some older properties, and the joint between an old wall and a newer frame is usually the first place rain gets in.
What your quote should include
- Whether they’re fully insured
- How the surfaces are prepared before sealing
- Whether they seal over old material or remove it
- Which sealant they’ll use, and why