Essex · England
Floor Joint Sealing in Shotgate
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for homes and businesses in Shotgate and across Essex. Fully insured, ARBOMaster approved and guaranteed for a year.
- Grout cracking in a straight line across a floor
- Caulk that has cracked where the floor moves
- Open gaps along the bottom of skirting boards
Floor joint sealing for homes and businesses in Shotgate
Gaps along the bottom of skirting are common in new and older homes alike. Caulk tends to crack there, so we close it with a flexible sealant instead. If you have dirt and water collecting in open floor joints and threshold joints that have opened or worn, we can put it right.
In a village or hamlet like Shotgate, new homes are more likely to be a barn conversion or a handful of houses than a big estate. Every one needs its sealant and floor joints done properly, whatever the size of the site.
Big or small, it’s backed by our 12-month guarantee.
- Where
- Shotgate (SS11, SS12)
- Wider area
- Essex
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
When something else is needed
A few problems are outside what sealant work can do:
- Structural movement or subsidence
- Tiles that have lifted or broken
- Subfloor problems that need a flooring contractor
Not sure which it is? You can call 0345 464 0079 or send us an email and we will tell you honestly.
What we seal
- Thresholds
- Wet room & bathroom floors
- Commercial floors
- Tiled floors
- Skirting boards
- Concrete floor joints
What we do, step by step
A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, carry out the job and clear up. Most jobs take a morning or an afternoon for most homes. In a small place like Shotgate, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First, the floor type, the gap and the traffic are checked.
- We remove what’s in the joint now.
- The joint is vacuumed clean and backing fitted where needed.
- We apply the sealant in a colour that suits the floor.
- We tool it neatly and tell you when it can be walked on and cleaned.
Preparing for the visit
- Keep pets and children clear of the area while we work
- Tell us about any previous sealing or DIY attempts
- For indoor joints, keep the area dry beforehand if you can
Getting a quote
Want a quote for floor joint sealing? Please ring 0345 464 0079 or send us an email and tell us about the job. We will explain what we’d do and give you a clear price before we start.
Read more
What we are called out for in Shotgate
Floors and walls move a little with the seasons. In winter, with the heating on, timber dries and gaps open, then close again in damper months.
Most people get in touch when they notice one of these:
- Skirting that has pulled away from the floor
- Dirt and water collecting in open floor joints
- Open joints around bathroom floor edges
- Gaps at thresholds between rooms
Managing a site like Beauchamps High School? Then floor and threshold joints in busy corridors wear quickly and are best resealed early.
What to look for in a quote
- What preparation is included
- Is the old sealant removed completely?
- What guarantee comes with the work
- Which sealant they’ll use, and why
Why it’s worth doing now in Shotgate
Dirt builds up in open joints. Sealed joints are easier to keep clean. Older cottages and farmhouses around Shotgate can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Combining jobs into one visit is generally more efficient than separate visits. You will get one clear quote for the whole job.
Why choose Mr Mastic in Shotgate
- A sealant colour to suit the surroundings
- Full insurance on every job
- Over 20 years’ experience
- Experience in homes, commercial sites and hotels
Floor joint sealing around Shotgate
Floors around Essex run from suspended timber in older homes to concrete in newer houses and units, and they don’t all move the same way. The joint at the skirting or threshold has to allow for that.
If you look after a church, hall or community building such as Church of St Nicholas, floor and skirting joints in halls and kitchens wear like any others. If you let a flat or house near Battlesbridge station, gaps at skirtings and thresholds are worth sealing between tenancies.
Shotgate is about 1 mile east of Wickford, in Essex. For floor joint sealing in and around Shotgate, please ring 0345 464 0079 or drop us an email for a quick quote. We cover Essex from our Crawley base, Shotgate included. Across Essex, we cover 644 places, Shotgate among them. For nearby work, see our Chelmsford page, about 9 miles away.
Every address in SS11 and SS12 is within our area for floor joint sealing, from the main roads to the quietest streets. If you need floor joint sealing at a property on Third Avenue, First Avenue and Second Avenue or anywhere close by, we can help. Nearby, we also carry out floor joint sealing in Rawreth (1 mile east), Wickford (1 mile west), Battlesbridge (1 mile north-east), Runwell (2 miles north-west) and Brock Hill (3 miles north-west). We also work in nearby towns such as Chelmsford (9 miles north), Basildon (5 miles south-west), Brentwood (11 miles west), Maldon (10 miles north-east), Canvey Island (6 miles south) and Billericay (6 miles west).
Local landmarks in Shotgate
In Shotgate, that means homes and buildings near Hilltop Infant School, among other places. The closest station to Shotgate is Battlesbridge station, roughly 1.3 miles north-east of the centre. Nearby you’ll also find Basildon University Hospital (5.5 miles south-west) and Battlesbridge Motorcycle Museum (1.3 miles north-east). For a walk, there’s Shotgate Thickets.
Places near Shotgate
What else we do in Shotgate
How to look after the new joints
To keep the joints looking good and working properly:
- Act on grout cracks that run in a straight line
- Use a well-wrung mop rather than flooding the floor
- Ask before painting over a sealed joint
- Keep dirt out of the joints
In commercial units, keep pallet trucks and heavy wheels off new joints until they’ve cured. Cone off the area if needed while it cures.
A tiled floor that cracks along a line will keep cracking until it can move. Adding a movement joint early can stop cracks spreading to the tiles.
DIY versus a professional finish
If you’ve already had a go yourself, that is fine. We cut it out and start again, so tell us about it when you ask for a quote.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Different surfaces, different methods
Commercial floors
In commercial buildings, we can plan floor joint work around opening hours. We can arrange out-of-hours work if the floor is busy.
Thresholds
Thresholds between rooms meet two floors and often a door frame. A flexible sealant suits both floor finishes.
FAQs for Shotgate
Is Shotgate in your area for floor joint sealing?
Yes, Shotgate is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or send us an email with a few details of the job, and we will give you a clear price.
Will you come out to Shotgate?
Yes. Shotgate is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Will I be able to paint over the new joint?
For painted skirting, we use a flexible product that can be painted. Silicone is not made to be painted, so we use it where the joint stays unpainted.
Can tenants book the work?
Yes. Ask your landlord first, and we can send them the quote if that helps.
What do you put in the joint?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We explain the product when we quote.
What should I tell you?
The location, the problem and the rough size of the job. Photos by email help too.
Is it worth trying it myself?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.
Can you reseal concrete floor joints in an industrial unit?
Yes. Old filler is cleaned out and the joint resealed with a floor-joint product. Let us know about the traffic and we’ll quote.