Essex · England
Shotgate Remedial Sealant
Problem with your failed sealant joints in Shotgate? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Black mould underneath the bead
- Caulk or the wrong sealant used in a wet area
- Movement joints that have split or pulled away
Remedial sealant in Shotgate
Some sealant jobs are not a simple reseal, because someone has already had a go. Silicone laid over silicone, smears across tiles, the wrong product in a moving joint or mould trapped underneath all have to come out before the joint can be done properly. If you have a second bead peeling off the first and repeat leaks from the same joint, we can put it right, whatever the surface.
Somewhere as small as Shotgate, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
The work is covered for a year after we finish. If anything isn’t right with it, call 0345 464 0079 or email us.
- Where
- Shotgate (SS11, SS12)
- Wider area
- Essex
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Looking after it afterwards
Aftercare is simple:
- Air the bathroom so the sealant can dry
- Always have old sealant cut out, not covered
- Ask why a joint failed before redoing it
- Keep movement joints clear of mortar and paint
Where we have pointed out another fault, have it put right, or the new joint may fail again.
Mould trapped under over-sealed joints spreads unseen. By the time it shows through, the joint is well past saving.
Landlord and commercial work in Shotgate
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will quote.
Surface by surface
Windows & doors
Failed frame mastic is often hard, cracked and in several layers. All of it is cut out and the frame and wall cleaned.
Mouldy bath & shower sealant
Where mould keeps coming back, ventilation is generally part of the cause. We will reseal and tell you if extraction looks to be the issue.
Questions from Shotgate
Will you come out to Shotgate?
Yes. Shotgate is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you do remedial sealant in Shotgate?
Yes, Shotgate is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or email us with a few details of the job, and we’ll send you a clear quote.
Do you take out the old sealant first?
Always. Sealing over old sealant is the main reason resealing fails early, so we never do it.
What if resealing won’t fix my leak?
You’ll hear it from us. A cracked tray, faulty valve or leaking waste needs a different trade, and we won’t reseal for the sake of it.
When is the sealant fully cured?
Most sealants are touch-dry well before they’re fully cured. We’ll give you the cure time for the product we used before we leave.
Can tenants book the work?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
What do you need from me for a quote?
Let us know what needs doing and where. We’ll ask anything else we need to know.
What affects the quote in Shotgate
Some jobs are bigger than they look, and some smaller. What affects the quote:
- Whether old sealant or filler has to be cut out
- Any working-time requirements on site
- The number of rooms or windows
- The type of sealant required
The cost depends on how much there is to do, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before any work starts.
Asking for a quote
To make quoting easier, let us know:
- What the problem is, such as mould, gaps, leaks or cracking
- The address or postcode of the job
- Any access issues, like height or stairs
- Whether it’s a home or a business
Asking for a quote is easy: let us know what needs doing and where. Photos by email help us understand the job.
Also near Shotgate
More services for Shotgate
Leave it or put it right?
Mould under a bead cannot be reached by cleaning. Removal is the only way to get at it, so the joint can be treated and resealed. Where a wall is exposed, as many are in small places like Shotgate, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Doing several joints on one visit is usually more efficient than separate visits. We’ll give you a clear price for the lot.
Why book with us
- We are fully insured
- One-year guarantee on every job
- Domestic, commercial and hotel work
- Anti-fungal sanitary silicone in wet areas
Take a look at how sealant jobs are priced or what customers say.
Remedial sealant around Shotgate
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
For an older house near a landmark such as Church of St Nicholas, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. If you look after a building such as Beauchamps High School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Shotgate is about 1 mile east of Wickford, in Essex. Every kind of property in Shotgate can book us for remedial sealant, old or new, large or small. The work is guaranteed for a year. We cover 644 towns and villages across Essex, from the larger towns to small villages. For nearby work, see our Chelmsford page.
Work in SS11 and SS12 works the same way as everywhere else we cover. If you need remedial sealant at a property on Third Avenue, First Avenue and Second Avenue or a nearby road, our applicators can take on the job. Other places close to Shotgate include Rawreth (1 mile east), Wickford (1 mile west), Battlesbridge (1 mile north-east), Runwell (2 miles north-west) and Brock Hill (3 miles north-west). We also work in nearby towns such as Chelmsford (9 miles north), Basildon (5 miles south-west), Brentwood (11 miles west), Maldon (10 miles north-east), Canvey Island (6 miles south) and Billericay (6 miles west).
Near you in Shotgate
Locally, jobs take us to homes and businesses close to Hilltop Infant School. The closest station to Shotgate is Battlesbridge station, about 1.3 miles north-east of the centre. A little further out are Basildon University Hospital (5.5 miles south-west) and Battlesbridge Motorcycle Museum (1.3 miles north-east). The countryside around Shotgate includes Shotgate Thickets.
What we are called out for in Shotgate
How a joint is built matters as much as the product. Sealant packed too deep, or stuck to the back of the joint as well as the sides, can’t stretch, and tears at the first real movement. Backing sets the depth and stops that.
Look out for any of the following:
- Smears and lumps from a botched reseal
- Caulk or the wrong sealant used in a wet area
- Sealant peeling off a dusty or damp surface
- Over-sealed joints coming away
For landlords with property near Battlesbridge station, a joint that keeps failing is best fixed properly while the property is empty.
Before you book anyone
- The length of the guarantee
- Whether you can choose the colour
- What product goes in the joint
- Whether VAT is included
What we do, step by step
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The job generally takes a few hours for a typical bath or shower, longer where several layers have been applied from start to finish. Somewhere as small as Shotgate, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by checking the joint for movement, leaks and the reason it failed.
- Every layer of old sealant is cut and cleaned out.
- The joint is cleaned, treated for mould and left to dry.
- We use the right backing and sealant for any joint that moves.
- Finally we finish the joint and talk you through what we found.
How to prepare
- Mention any tricky access
- Tell us about any water getting in
- Try not to wet indoor joints just before the visit
Get a quote
We don’t publish a price list, because every job is different. Instead, your job gets its own clear quote. To get started, ring 0345 464 0079 or email us.