Highland · Scotland
Reiss Window Mastic
Window and door frames in Reiss need attention? We cut out the old, prepare the joints and apply the right sealant.
- Gaps left after new windows were fitted
- Water coming in at the bottom corners of a door
- Cold air getting in at the frame edge
Your questions about window mastic in Reiss
Can you help a landlord with a rental near Wick station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can drop us a line at info@mrmastic.co.uk with the details for a clear quote.
Will you come out to Reiss?
Yes, we do. Our work covers the whole of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Will there be a smell?
Possibly a little. Any smell clears as the sealant cures, and ventilation helps.
Will it make a mess?
Tidy work is part of the job. Nearby surfaces are protected, and we clear up when we’re done.
Can resealing stop a draught around my window?
If the draught is coming in around the frame, yes. If it’s through the window’s own seals or a hinge, that’s a different fix, and we will say so.
Does someone need to be in?
We need access to the joints, so we’ll agree that with you when we book. For inside work, that normally means someone being in.
Is it worth trying it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it doesn’t work out, we can redo it.
How much does window mastic cost in Reiss?
Size, access and the old material all affect the cost. Call for a quick quote.
How we handle window mastic in Reiss
A cold draught around a closed window often comes from the frame edge. Resealing that joint can make a room feel noticeably less draughty and quietens the whistle on windy days. Where the air is getting in through the window itself, we’ll say so. If you’re dealing with cold air getting in at the frame edge and gaps left after new windows were fitted, we can put it right, whatever the surface.
Older stone-built homes in Scotland often have sash and case or timber windows set in stone. Those suit a traditional sand mastic or a neutral-cure sealant, not an acetoxy silicone that can attack some stone.
You are covered for a year from the day we finish. If there’s a problem with it, please email us at info@mrmastic.co.uk.
- Place
- Reiss (KW1)
- Wider area
- Highland
- Cover
- A year, on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Surface by surface
Window sills
Where a sill meets brick or render, the ends often crack first. A tight seal at each end keeps rain out of the wall.
Patio & French doors
Water at the foot of a door frame is not always the mastic: blocked drain slots, worn brush seals and threshold details can let water in too. We look for the cause first.
When something else is needed
It helps to know what we cannot do:
- Damp coming through the wall itself rather than the frame joint
- Rotten timber, which needs a joiner first
- A sash or casement that will not close properly
If you are not sure, just email us at info@mrmastic.co.uk and we will give you a straight answer before you book.
Joints and surfaces we work on
- Aluminium frames
- Timber windows & doors
- uPVC windows
- Composite doors
- Window sills
- Patio & French doors
When to call us in Reiss
Plenty of failed mastic was poorly applied in the first place. Mastic laid onto dusty, damp or crumbling surfaces never bonded as it should, and it lets go sooner than it should.
If you can see any of these, it’s time to have the joints looked at:
- Sealant in the wrong colour for the frame
- Cold air getting in at the frame edge
- Leaking joints at the ends of sills
- Old mastic that has gone black or come away
Letting a property close to Wick station? Then renewing tired window mastic between tenants heads off draught and damp complaints.
What to look for in a quote
- Which colour the sealant will be
- Who turns up on the day
- How the joint is cleaned and prepared
- How long to leave it before use
How to look after the new joints
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Don’t use solvent cleaners on the joint
- Keep paint and stain on wooden frames in good order
- Paint up to the joint, not over it
- Clean frames with a soft cloth and soapy water
On timber frames, keep the paintwork in good order, because bare, wet timber moves more and pulls at the joint. Paint up to the joint, not over the silicone.
Draughts get worse, not better. As the old mastic shrinks further, more air gets through, and a cold room gets colder. A new joint closes it up.
Other services in Reiss
What happens on the day
At the end, we look at the finished work together and tell you how long to leave it. The visit itself normally takes anything from an hour or two to a full day, depending on how many frames there are, depending on the size of the job. Somewhere like Reiss may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- First, we go round the frames with you and agree the list.
- The old mastic is cut out and scraped back to clean surfaces.
- Where the gap is deep, backing rod goes in first.
- A flexible exterior sealant is applied in a colour to suit the frame.
- We tool each bead neatly and check every joint is closed.
Before we arrive
- Mention any parking rules near the property
- Tell us about any previous sealing or DIY attempts
- Tell us about any water getting in
Ask for a quote
Getting a quote is simple: tell us what needs doing and where, and roughly how big it is. Photos by email help us understand the job, and we’ll take it from there.
Advice
What affects the cost of window mastic
Call for a quick quote. What matters most is:
- The number of rooms or windows
- Working hours on commercial sites
- The type of sealant required
- The number and length of the joints
The cost reflects the work involved, not a rough estimate. That’s why we ask about the job first and agree the price before starting.
Asking for a quote
Before you ask for a quote, have a think about:
- Whether it’s a home or a business
- The address or postcode of the job
- How we’d reach the joints
- If someone has resealed it before
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.
What happens if it’s left?
Getting a straight, even bead on an outside frame takes practice, especially on upper floors. A professional job is cut out properly, backed where needed and finished neatly, in a sealant suited to the wall. In a place like Reiss, small leaks are easy to put off, but water behind a failed seal does the most damage when nobody’s watching.
The cost depends on the size of the job, how hard the old material is to remove and access to the work. You will have a clear quote before any work starts.
Why Reiss clients choose us
- A sealant colour to suit the surroundings
- Domestic, commercial and hotel work
- White, clear, grey or coloured to suit, where the product allows
- Arbo and Everbuild products
Take a look at how sealant jobs are priced or what customers say.
Window mastic in Reiss: local notes
Reiss is within about 2 miles of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That is hard on the mastic around window and door frames, especially on the side facing the sea. Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and failed outside joints work against that.
Around Reiss, as everywhere, window mastic is only as good as the preparation behind it.
Reiss is about 16 miles south-east of Thurso, in Highland. Our applicators cover window mastic for householders, landlords and businesses in Reiss and nearby. Across Highland, we cover 253 places, and Reiss is one of them.
Postcode districts we cover here for window mastic: KW1. You’ll find streets such as Nordwall Park and Plover Place. With the A99 close by, Reiss is easy for our applicators to reach for window mastic. We also cover the places around Reiss: Ackergillshore (2 miles east), Haster (2 miles south), Wick (3 miles south-east), Staxigoe (4 miles south-east) and Whiterow (4 miles south-east). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Near you in Reiss
For rail, the closest station is Wick station, roughly 3 miles south-east of the centre. Nearby you will also find Castle Sinclair Girnigoe (2.9 miles east) and Caithness General Hospital (3.1 miles south-east). Green spaces nearby include Loch of Killimster.